Mystic Romance HZ-1202 Scent Equipment User Manual
- June 5, 2024
- Mystic Romance
Table of Contents
- Mystic Romance HZ-1202 Scent Equipment
- Technical parameters
- Operation Steps
- Reset the Remote Control
- Remote Control
- Set the working periods
- TROUBLESHOOTING & MAINTENANCE
- OPERATION FOR ADDING AND CHANGING THE OIL
- EQUIPMENT COMPONENT INSTRUCTION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Mystic Romance HZ-1202 Scent Equipment
Product introduction
HZ-1202 Scent Equipment is for small commercial places. it uses advanced
atomization technology to make the liquid oil into fog, then can diffuse the
fragrance into the air quickly. it can highly improve aroma concentration in
order to cover big area. The model is very convenient and practical with
remote control to do any function setting according to customers’ different
request.
Technical parameters
- Coverage: 100-200 m.
- Noise: 28 dba
- Oil Bottles: 120ml.
- Voltage: DC110V.
- Power: 5W
- Weight: 0.9KG
- Spare parts: Scent equipment, Power adapter, Oil bottle, Atomizer Core, Remote control.
- The remote control can set different aroma concentration to suit for different usage.
- Put oil into the bottle, then machine working can let you feel good smell in your places all the time.
Operation Steps
- First: Hold the upper and below parts unscrewed in counterclockwise direct- ion to open the machine.
- Second: Add or replace the Oil, then Tighten the oil bottle counterclockwise and keep it straight.
- Third: Align the Upper and Below parts by Indicate light, then tighten it.
- Fourth: Connect the electricity, use the remote control to set.
Indicate Light
- Blue Light: The equipment has been electrified.
- Green Light: The equipment is working.
- Red Light: It will flash when press any buttons.
Reset the Remote Control
If lost or mixed the remote control, new remote control can also be used by re-set. First cut off the power, then press 35% button, at the same time also connect the power adapter again, the Red light will flash, means Re-set successfully.
Tip
- If don’t use the equipment for a long time, please clean the spray nozzle and internal parts.
- Operation: add 95% alcohol to the empty oil bottle, set the machine to be 95% to work for 10-15 minutes.
- To clean the machine with 95% alcohol every two months.
Remote Control
Set the working periods
- The remote control can set the Aroma concentration, Mist Level, working hours and ON/OFF setting so that make the machine to work longer time.
- (ON) Press it to start working.
- (OFF) Press it to stop working.
- (AROMA) Under the working period, press the AROMA button to recover the factory setting. Factory Setting is 8 hours, the biggest Mist Level and 95% setting.
- (+) Under the working period, press it to increase the Mist Level. Each time increase 5%.
- (-) Under the working period, press it to decrease the Mist Level. Each time increase 5%.
- (20%) (35%] [50%] [65%] [80%) [95%] means aroma concentration setting (smell Level).
For example:
[20%] means it work for 40s and stop for 160s.
[65%] means it work for 130s and stop for 70s, total period is 200s.
- 1H,4H,8H means working hours.
1H= 1 hours working 4H= 4 hours working 8H= 8 hours working
TROUBLESHOOTING & MAINTENANCE
TROUBLES | ELIMINATION METHODS | MAINTENANCE |
---|---|---|
NO atomization | Check the power supply: check the pump working or not; check |
the working
status (working time or pause time)
| Connect the power supply again to check the pump and set the program again
Small atomization amount| Check the atomizer if block or not; check the pump
good or not| Clean the atomizer and change the pump
Comes out liquid oil from external atomization connector| Check if the
atomization connector is loose or not Check if the machine is
lean or not
| Tighten the atomization connector and make the machine upright
Oil Leaking| Check if the oil bottle is loose not; Check if the
bottle seal is lost or not
| Tighten the oil bottle and bottle seal
OPERATION FOR ADDING AND CHANGING THE OIL
For the first time to use the machine, please tighten the oil bottle before
connecting power supply, Set the working time and adjust the aroma
concentration.
If need to add or change the oil, please cut down the power supply Then open
the machine with the key, rotate the empty oil anticlockwise to take out the
bottle to put the oil in again and finally clockwise rotate the bottle and
make sure it is tight. Then connect the power supply again.
WARRANTY
It is suitable for all the machines.
Within 12 months after purchase date, Warranty is offered for all qualified
machines. During warranty, we will offer repair services and the free parts.
The warranty card & purchase Invoice are needed if after service required. Please do contact with us within warranty if any problems.
THE FOLLOWING IS NOT FOR FREE WARRANTY SERVICE
- Damage & problems caused by Accidents & Fire.
- Not use properly and wrong operation.
- If repaired by not professional person and make some parts damaged.
- Damaged during transportation.
- Without our warranty card.
- Without proper cleaning for a long time.
- Machines & Parts not from us.
- Machines not gotten from official channels.
EQUIPMENT COMPONENT INSTRUCTION
METHOD OF CHANGING ATOMIZING CORE
Step 1 : Screw out the essential oil bottle, then pull out the pipe and
take the atomizing core out.
Step 2: Put the new atomizing core inside the nozzle
Dear Users:
- Please read carefully before use and keep properly.
- Please make sure the machine without any essential oil inside the bottle during transportation, so that to protect the machine from getting damaged and leaking:
- Please make sure the machine upright, no leaking and not down; or may damage the device and parts.
- Please do not use the broken power wire and make sure the power supply is suitable for the machine or may cause fire.
- Please do not open the machine by yourself
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>