BaByliss PRO BP9557UC Professional Straightener Instruction Manual
- June 6, 2024
- BaByliss PRO
Table of Contents
- BaByliss PRO BP9557UC Professional Straightener
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS
- STRAIGHTENING BASICS
- GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER
- USER MAINTENANCE
- FEDERAL COMMUNICATIONS COMMISSION NOTICE
- SUPPLIER’S DECLARATION OF CONFORMITY
- SERVICE CENTER
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BaByliss PRO BP9557UC Professional Straightener
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including:
KEEP OUT OF REACH OF CHILDREN! READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY
FROM WATER!
DANGER
As with most electrical appliances, parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:
- Always unplug immediately after using.
- Always turn off the iron when not in use.
- Do not use while bathing or in a shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquids.
- If the iron falls into water, unplug it immediately. Do not reach into the water.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
- Plug the iron into an electrical outlet.
- The iron should never be left unattended when plugged in.
- Do not pull, twist, or wrap cord around the iron.
- This iron should not be used by, on, or near children or individuals with certain disabilities.
- Use the iron only for its intended use as described in this guide.
- Do not use attachments not recommended by the manufacturer.
- Never operate this iron if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged or has fallen into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hole in the iron.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with the iron. Avoid multiple cables to a plug.
- The iron and casing are hot when in use. Do not let eyes and bare skin touch heated surfaces.
- Do not place the iron directly on any surface while it is hot or plugged in.
- Do not touch hot surfaces of the iron.
- This iron has no user-serviceable parts. Servicing should only be performed by an authorized service representative.
- Suitable for dry locations ONLY.
- While not in use, ensure the iron has completely cooled before being placed into any storage.
- Do not use this appliance near bathtubs, showers, toilets or any other recipient containing water.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS
This appliance is intended for professional use. Use on Alternating Current (60 Hz) only. Standard appliances are designed to operate at rated voltage. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
STRAIGHTENING BASICS
- Plug the straightening iron into a standard electrical It is not necessary to touch the iron with your hand to judge readiness.
- Turn the temperature regulator dial to the setting that is appropriate for your hair You can
use the following chart as a reference. The iron will heat up very quickly.
TEMPERATURE SETTINGS | HAIR TYPE |
---|---|
235˚F – 254˚F (113˚C – 123˚C) | Fragile, very fine hair |
255˚F – 294˚F (124˚C – 145˚C) | Thin, easy-to-curl hair |
295˚F – 344˚F (146˚C – 173˚C) | Normal textured hair |
345˚F – 414˚F (174˚C – 212˚C) | Wavy or curly hair |
415˚F – 450˚F (213˚C – 232˚C) | Coarse, very thick hair |
- Section dry hair evenly, and comb each Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary. Let the hair cool before combing.
STYLING TIPS USING STRAIGHTENER
For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten. For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle.
PORCELAIN CERAMIC
Your porcelain ceramic straightening iron has many added benefits. The porcelain ceramic plate technology provides increased heat distribution, eliminating the damaging hot spots found with other irons. This porcelain ceramic iron will give your hair a smooth, silky shine while eliminating frizz.
GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER
NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART
TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN
ONE MINUTE. DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL
BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE
VOIDED. TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
USER MAINTENANCE
Your iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around the unit. Damage will occur at the high flex point of entry into the unit, causing it to rupture and short. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then simply put back in the box, and store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
WARNING :
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SUPPLIER’S DECLARATION OF CONFORMITY
Brand: BaBylissPRO®
Model No.: BP9557UC/BP9559UC/ BP9561UC
Description: Straightener
Responsible Party: Conair Corporation
1 Cummings Point Road
Stamford, CT 06902
203-351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and this device must accept
any interference received, including interference that may cause undesirable
operation. DATE OF ISSUE: 05/20/2019.
WARNING
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG. KEEP AWAY
FROM WATER.
Everyone knows that electricity and water are a dangerous combination, but did
you know that an electrical appliance is still electrically live even if the
switch is off? If the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
IN NO EVENT SHALL BABYLISSPRO BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
SERVICE CENTER
BabylissPro
Service Department
7475 North Glen Harbor Blvd.
Glendale, AZ
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>