NGP 136Series Mortise Seal Installation Guide

136Series Mortise Seal

“`html

Product Information

Specifications:

• Manufacturer: National Guard Products Inc.
• Model: 136N, 136S, 136P Mortise Seal
• Seal Thickness: 1/4″ and 3/8″
• Gasket Width: 3/16″

Product Usage Instructions

Installation Instructions:

1. Cut the seal to the required length.

2. Prepare the door by mortising a slot that is 7/16″ wide and the
   desired depth to properly seal the gap.

3. Remove the gasket material from the metal retainer by sliding
   it out from the end.

4. Install the metal retainer into the mortised portion of the
   door and secure it with the provided screws.

5. Slide the gasket material back into the metal retainer.

6. Adjust the seal to ensure it does not obstruct the proper
   closing and latching of the door.

Spanish Installation Instructions (for reference):

1. Corte el sello a la medida.
2. Prepare la puerta haciendo una muesca de 7/16 de ancho con la
   profundidad deseada para sellar el gap.

FAQ (Frequently Asked Questions)

Q: How do I know which seal thickness to use?

A: The seal thickness should be selected based on the size of
the gap that needs to be sealed. Use the thicker seal for larger
gaps and the thinner one for smaller gaps.

Q: Can this product be painted to match the door color?

A: Yes, you can paint the metal retainer and gasket material to
match the color of your door. Ensure proper surface preparation for
better adhesion.

“`

National Guard Products Inc.
1-800-647-7874
136N, 136S, 136P Mortise Seal

1/4″ 3/8″
3/16″

1/4″ 3/8″
3/16″

Installation Instructions
1. Cut seal to length. 2. Prepare the door by mortising 7/16″ wide x depth desired to properly seal the gap. 3. Remove gasket material from metal retainer by sliding out the end. 4. Install metal retainer into mortised portion of door and fasten with screws provided. 5. Replace gasket material by sliding into metal retainer. 6. Adjust seal so it does not impede proper closing and latching of door.
Instrucciones de Instalación
1. Corte el sello a la medida. 2. Prepare la puerta haciendo una muesca de 7/16″ de ancho con la profundidad deseada para sellar el
espacio apropiadamente. 3. Remueva el empaque del retenedor metálico deslizándolo hacia fuera. 4. Instale el retenedor metálico en la muesca de la puerta y sujete con los tornillos suministrados. 5. Reinstale el empaque deslizándolo dentro del retenedor metálico. 6. Ajuste el sello para que no impida cerrar y correr debidamente el pasador de la puerta.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>