iskydance PB-12A-H, PB-12A-L Zigbee3.0 Constant Current LED Driver Owner’s Manual
- June 12, 2024
- iskydance
Table of Contents
Zigbee3.0 Constant Current LED Driver
Model No.: PB-12A-H(WZS),PB-12A-L(WZS)
Owner’s Manual
Features
- Tuya APP cloud control, support brightness adjust, delay turn on/off, timer run, scene edit, sleep wake-up and biorhythms function
- Philips HUE APP control by connect with Philips HUE bridge
- Voice control, support Alexa, Google, Amazon ECHO and TmallGenie smart speaker
- Can relay and route to each other, up to 15 hops
- Match with Zigbee 3.0 remote or scene panel control optional
- RESET button for clearing network connection
- Universal AC input / Full range
- Flicker – Free
- 1 channel constant current output, configurable current via DIP switch
- Synchronize on multiple number of LED drivers
- Over-heat / Over-load / Short circuit protection, recover automatically
- Full protective plastic case
- Suitable for indoor LED lighting application
- 5 Year, 50,000hr warranty
Mechanical Structures and Installations
Technical Parameters
Model | PB-12A-H(WZS) | PB-12A-L(WZS) |
---|
Output
| Output Voltage| 3-24VDC| 9-45VDC
Max Output Voltage| 33VDC| 48VDC
Output Current| 350-700mA| 100-450mA
Output Power| Max. 12W
Dimming Range| 0~100%, dimming depth:0.5%
PWM Frequency| 4000Hz
Current Accuracy| ±5%
Ripple & Noise| < 100mV
Input
| Input Voltage Range| 100~240VAC
Frequency Range| 50/60Hz
Efficiency| >79%/230VAC| >80%/230VAC
Alternating Current| 0.3A/115VAC, 0.15A/230VAC
Anti Surge| L-N:1KV
Inrush Current| Cold start 27A at 230VAC
Leakage Current| < 0.5mA/230VAC
No Load Power| < 2W
Protection| Over Load Power| Hiccup,recovers automatically affer fault
condition is removed
Short Circuit| Hiccup,recovers automatically affer fault condition is removed
Environment
| Woking Temperature| -20℃~50℃
T-case Max| 80℃
Working Humidity| 20%~90%RH, non-condensing
Storage Temp/Humidity| -40℃~80℃, 10%~95%RH
Temperature Coefficient| ±0.03%/℃ (0-50%)
Vibration Resistance| 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min
IP Rating| IP20
Safety&EMC
| Security Specifications| IEC/EN61347-1, IEC/EN61347-2-13
Withstand Voltage| I/P-O/P: 3750VAC
Insulation Resistance| I/P-O/P: 100MΩ/500VDC/25℃/70%RH
EMC Emission| EN61000-3-2 Class C, IEC61000-3-2
EMC Immunity| EN61000-4-2.3.4.5.6.8.11, EN61347
Certications| CE
LED Current Selection:
Model| | | | | | | | |
---|---|---|---|---|---|---|---|---|---
PB-12A-H(WZS)| Output Voltage| 3-24V| 3-24V| 3-24V| 3-24V| 3-22V| 3-20V|
3-18V| 3-17V
Output Current| 350mA| 400mA| 450mA| 500mA| 550mA| 600mA| 650mA| 700mA
PB-12A-L(WZS)| Output Voltage| 9-45V| 9-45V| 9-45V| 9-45V| 9-40V| 9-34V|
9-30V| 9-26V
Output Current| 100mA| 150mA| 200mA| 250mA| 300mA| 350mA| 400mA| 450mA
Applications
- Suitable for downlight, spotlight and decorative applications.
- Office / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and Display.
- Use for retrofit upgrades & new luminaire designs.
System wiring
Note:
- The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation.
- Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
- Please keep the distance between LED driver and router close, and check the WiFi signals.
- Users must use the Tuya ZigBee gateway to realize remote control and voice control (The smart panel integrate Zigbee gateway function).
App Operating Instructions
-
Network pairing
● Download the Tuya APP and register an account, search and add the Tuya Zigbee gateway device.
● Quickly press the “RESET” button five times or repeat power on and off five times to clear the previous network connection, enter pairing mode with the output light breathes blinking.
● Under the gateway, search and add new device. If the network connection is successful, you can find ZBS-DIM devices in Tuya APP. -
Lighting control settings
After pairing the light device, click the device and change brightness by touch brightness slide.