iskydance PB-12A-H WT WiFi and RF Constant Current LED Driver Owner’s Manual

PB-12A-H WT WiFi and RF Constant Current LED Driver
Owner’s Manual

Features

• Features
• Dimming interface: WiFi, RF Wireless
• Tuyo APP cloud control, brightness adjust, delay turn on/off light, timer run, scene edit function
• Voice control, support amazon ECHO and TmallGenie smart speaker
• Match with RF 2.4G remote or scene panel control optional
• Match key for clearing network connection
• Universal AC input / Full range
• Flicker – Free
• 1 channel constant current output, configurable current via DIP switch
• Over-heat / Over-load / Short circuit protection, recover automatically
• Full protective plastic case
• Suitable for indoor LED lighting application
• 5 Year, 50,000hr warranty

Applications

• Suitable for downlight, spotlight and decorative applications.
• Office / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health core, Retail and Display.
• Use for retrofit upgrades & new luminaire designs.

Mechanical Structures and Installations

Technical Parameters

condition is removed
Short Circuit| Hiccup, recovers automatically after fault condition is removed
Over Temperature| Current decrease when PCB temp>100t,recovers automatically after fault condition is removed
Environment| Waking Temperature| -20°C-50°C
T-case Max| 80°C
Working Humidity| 20%-90%RH, non-condensing
Storage Temp/Humidity| -40°C-80°C, 10%-95%RH
Temperature Coefficient| ±0.03%/°C (0-50%)
Vibration Resistance| 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min
IP Rating| 1P20
Safety & EMC| Security Specifications| IEC/EN61347-1, IEC/EN61347-2-13
Withstand Voltage| I/P-0/P: 3750VAC
Insulation Resistance| I/P-0/P: 100M0/500VDC/25°C/70%RH
EMC Emission| EN61000-3-2 Class C, IEC61000-3-2
EMC Immunity| EN61000-4-2.3.4.5.6.8.11, EN61347
Cortication’s| CE

LED Current Selection:

Model| | | | | | | | |
---|---|---|---|---|---|---|---|---|---
PB-1 2A-H(WT)| Output Voltage| 3-24V| 3-24V| 3-24V| 3-24V| 3-22V| 3-20V| 3-18V| 3-17V
Output Current| 350mA| 400mA| 450mA| 500mA| 550mA| 600mA| 650mA| 700mA
PB-12A-L(WT)| Output Voltage| 9-45V| 9-45V| 9-45V| 9-45V| 9-40V| 9-34V| 9-30V| 9-26V
Output Current| 100mA| 150mA| 200mA| 250mA| 300mA| 350mA| 400mA| 450mA

System wiring Note:

1. The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation.
2.  Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
3. Please keep the distance between LED driver and router close, and check the WiFi signals.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:
Use Match key
Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
Delete: Press and hold match key for  So to delete all match, The light blinks 5 times means all matched remotes were deleted.
Use Power Restart
Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Tuya APP network connection
Press and hold Match key for 2s, or push twice Match key fastly:
Clear previous network connection, enter Smart config mode, the blue LED indicator flash fastly, the output LED will flash 10 times.
Press and hold Match key for 5s:
Clear previous network connection, enter AP config mode, the blue LED indicator flash slowly.
If smart config failed, please try AP config.
Repeat power on and off for 5 consecutive times, also clear previous network connection, enter Smart config mode, the output LED will flash 10 times.
If Tuya APP network connection succeed, the blue LED indicator will stop flash, and in Tuya APP, you can find DIM device.
Tuya APP interface White interface
Touch brightness slide to adjust brightness. Scene interface
The 1-4 scene is static color. the inner color of these scene can be editable. Music, Timer, Schedule
The music play can use smart phone music player or micro-phone as music signal input.
The Timer key can turn on or turn off light in the next 24 hours.
The Schedule key can add multiple timers to turn on or turn off light according to different time periods.

Installation precautions

1. The products shall not be stacked, the distance should be 50cm, so as not to affect lifespan of the products due to poor heat dissipation.
2. The installation height shall be 1m from the floor to ovoid shortening the remote control distance due to too weak reception signal.
3. The products are not allowed to be close to or covered by metal objects, with an interval of > 20cm to ovoid signal attenuation and shorten the remote control distance.
4. Avoid installation at the corner of the wall or the corner of the beam, with an interval of > 20cm to avoid signal interference.

Failure analysis and troubleshooting

2.Connection test
Remote control nonresponse| 1.Run out of battery
2.Beyond remote control range
3.No matching| 1.Replace the battery
2.Move the remote to controller closer
3.Match the remote to LED driver
Hiccup flashing| Overload| Check the power of the light
Controlled by other remote| Wrong pairing| Delete all pairing and pair with remote again
Multiple LED drivers are out of sync| Inconsistent fade on/off time| Set the same fade on/off time

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>