iskydance RT1 Dimming Touch Wheel RF Remote Controller Owner’s Manual

iskydance RT1 Dimming Touch Wheel RF Remote Controller

Dimming Touch Wheel RF Remote Controller

Model No.: RT1/RT6/RT8

Features

• 1, 4, 8 zone dimming
• Touch color wheel
• Wireless remote with a 30m distance range
• AAAx2 battery powered
• Operates with LED indicator light

Technical Parameters

Input and Output| Output signal| Working voltage| Working current| Standby current| Standby time| Remote distance
---|---|---|---|---|---|---
RF(2.4GHz)| | 3VDC(AAAx2)| | | | 30m

Usage Instructions

1. Insert two AAA batteries into the remote controller.
2. To dim the LED lights, use the touch color wheel on the remote controller.
3. The remote controller can operate up to 30m away from the LED light receiver.
4. If you have multiple LED light receivers, each remote controller can be paired with one or more receivers.
5. The LED indicator light on the remote controller will indicate when it is in use.

1, 4, 8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2 battery

Features

• Apply to single color LED controller.
• Ultra sensitive color adjustment touch wheel.
• Each remote can match one or more receiver.
• AAAx2 battery powered.
• Operate with LED indicator light.

Technical Parameters

Mechanical Structures and Installations

Back holder
Two options are offered for selection, please fix the back holder on the wall with two screws, or adhere the back holder to the wall with paster .

Operation

• When turn on light, the indicator display blue. when turn off light, the indicator display red.
• When touch the color wheel, the indicator will display the same color.
• When press or touch operation is invalid (If the light is off), the indicator display red.
• To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.

Match Remote Control

(two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

**Use Power Restart

**

Match:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Key function

The remote can be used as 4 zone dimming remote or single zone 4 channel dimming remote.

• On/Off + 4: Long press 2s set as 4 channel dimming remote, only match with one or multiple receiver of 4 channel, such as V4 or C4 controller.
• On/Off + 1: Long press 2s set as 4 zone dimming remote, each zone match with one or multiple receivers.

When set ok, the red indicator will light on longer.

Safety information

1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>