BUXTON BBS 5500 BT Speaker User Manual

BUXTON BBS 5500 BT Speaker User Manual

Safety Instructions

This product has been designed with the utmost safety in mind. However, incorrect use may lead to electric shock or fi re. This is why users should observe the following instructions when using this device.

This device uses a semiconductor unit and contains no user serviceable parts. Do not disassemble this device, otherwise you are exposed to the risk of electric shock. If any damage to this product occurs, please have this product repaired by a qualified service technician.

Power source
Power supply of this unit must be match the serial plate data.

Heat source
Keep this unit out of heat sources like stove or direct sunlight.

Cleaning
Prior to cleaning, please disconnect power fi rst. For cleaning, don’t use liquid detergents or caustic liquids – just clean the unit with a soft cloth.

Heavy objects
Do not place heavy objects on the unit, otherwise damage might occur.

Connecting other devices
Before connecting other devices to this unit, please make sure to disconnect power. Otherwise damage to the unit or personal injury might occur.

Faults to be repaired
If any of the following problems occurs, please disconnect power to the unit and contact a qualifi ed service technician.

• A. Power cord or plug is damaged.
• B. Liquids or other foreign objects have penetrated inside the product.
• C. If the unit does not work even if it’s being operated according to the instructions, don’t press any buttons other than those described in these instructions. Otherwise, damage to this unit may occur along with a more demanding repair.
• D. This unit has fallen on the ground from a big height.
• E. Burns can be smelled from the product inside.

Maintenance
If you don’t have enough technical knowledge necessary to maintain this unit, don’t attempt to repair it by yourself. By removing the cover, you are exposed to a risk of electric shock. If needed, please contact a qualifi ed service technician.

Replacement of parts
If you need to replace any part of this unit, ask your service technician to make a replacement for equal spare part models. If other spare part models are used for replacement, serious damage, electric shock or shortening the unit’s lifetime may occur.

Safety check
When done with the maintenance, ask your service technician to perform an on- site safety check to make sure that the unit’s operation is safe.

Note:
Before using this product, read these instructions carefully and keep it well for future use.

Supply content

1. BT speaker
2. 3.5mm audio jack
3. USB-C charging cable
4. User’s manual

BT speaker description

1. Bluetooth indicator
2. On/off button, audio input change
3. Play/Pause button, light effects on/off
4. Bluetooth button – fast Bluetooth function selection, incoming call answer/reject
5. TWS LED indicator
6. TWS button (True Wireless Stereo) – connecting two BBS 5500 speakers
7. MicroSD card slot
8. Audio AUX IN mini jack socket (3.5mm)
9. Charging socket (USB-C)
10. Next track button, volume up
11. Previous track button, volume down

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.

Before first use, please charge the BT speaker to a maximum level. Hold down the power On button to turn on the BT speaker. Turning on/off is indicated by a sound signal. To turn the BT speaker off , hold down the power On button.

Caution: After a longer period of inactivity, the appliance will turns itself off .

Pairing devices via Bluetooth

Turn on the BT speaker and search for its Bluetooth name “BBS 5500” in the device to which you wish to pair and start the pairing process. If you are requested to enter a pairing code while your device and the BT speaker are pairing, use the code: “0000”. To disconnect a paired device, hold down the Bluetooth button until LED starts blinking blue on the unit.

Note: To ensure a stable Bluetooth connection, make sure that the distance between the BT speaker and your connected device is kept within 10 meters.

Caution: Some connected devices support common volume setting. If some of the connected devices do not support this feature, the volume setting will operate separately on each device.

TWS function

If you buy another Bluetooth speaker („BBS 5500“), you can pair both speakers together for optimum stereo sound. First, make sure your device is not connected to any BT speaker. Turn both BT speakers on, press the TWS button briefl y and wait until they are paired automatically. The LED indicator will stop blinking and remain lit on both devices when the BT speakers are paired.

Changing the volume level using the volume control buttons will take effect automatically on both paired BT speakers. Pressing and holding the Power On button on one of the speakers will turn both paired speakers off .

Note: If the BT speakers fail to be paired successfully, hold down the TWS button on both speakers until the speakers show message „true wireles cleared“.

Audio AUX IN

The BT speaker is equipped with a 3.5mm jack. Your device can be connected to the BT speaker via the supplied audio cable. First connect the audio connector to your appliance and then into the socket in the BT speaker.

Notice: before connecting your device and speaker, ensure that the output signal from your device is at its minimum level (minimum output volume). This will prevent the BT speaker from damage. When the audio cable is connected, the BT speaker does not meet the water in gression protection class.

Note: In this mode, not all functions of the BT speaker are available. The Bluetooth function is not active if the audio jack is connected to the BT speaker.

Play/Pause button

1. The BT speaker is equipped with lighting eff ects in the compartment of passive emitters. To turn the light eff ect on/off , press the Play/Pause button twice briefl y.
2. Press the Play/Pause button to start or pause music playback during Bluetooth connection or while a memory media is inserted.

Bluetooth button

1. The Bluetooth button serves for a fast Bluetooth function selection.
2. The incoming call to a Bluetooth connected paired device will be accompanied by an acoustic signal which will interrupt the music being played back. Each Bluetooth button press will answer/hang up an incoming call. To reject an incoming call, long press the Bluetooth button.

Note: The reception of the BT speaker’s microphone may be attenuated due to the device’s water resistance. To improve the reception, please speak loud and in the vicinity of the BT speaker.

Volume and track playback control

To control the BT speaker’s volume (+/- buttons), use the buttons on the BT speaker. During music playback, you can press and hold the “+” button to jump to the next track playback. To select the previous track, press and hold the “−” button.

Note: If the battery charge level drops below 20%, the BT speaker will reduce the volume automatically. We recommend to start charging the BT speaker battery.

Memory card slot

1. Insert the memory card so that the contacts point towards the speaker’s charging connector. When you insert a memory card, the BT speaker will automatically start playing back its contents. If there are no fi les for playback on the memory card, the BT speaker will switch to another playback mode (e.g. AUX IN). To release the TF memory card, press it gently into the BT speaker with your finger nail or a blunt instrument and the card will release. Then you can carefully remove it with your finger nails (or with tweezers).
2. Playing music
   Press the on/off button briefly to switch to the “memory card mode”. The music playback from the connected storage will start automatically. Please record your music on the storage in the same order as it’s to be played back from the BT speaker.

Caution: Due to a number of devices on the market, compatibility and playback support are not guaranteed for all media. The memory devices you want to connect should be tested in advance and/or formatted as FAT32. The playback of protected media, files or content stored inside them may fail. While the USB storage is connected, the speaker does not meet the water ingression protection class.

Charging the BT speaker

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. To charge the BT speaker, please connect the charging adapter to the mains and then to the BT speaker. A low battery level will be indicated by an audible alert and a fl ashing LED indicator with the music playback volume being reduced at the same time.

Caution: For charging, use only the original accessories supplied with the appliance. To achieve the maximum battery lifetime, it is best not to start charging until the low battery audible alert is output. Charge continuously until fully charged. When the battery operating time becomes very short, the battery lifetime has been used up; we recommend that you have the battery replaced at your authorized centre.

Recommendation: If the unit is not to be used for an extended period of time, we recommend to fully charge the battery once every two to three months. We recommend to store the unit with a the battery charged to prevent irreparable damage to the battery (loss of capacity).

Ingression protection (IPX7)

The unit is resistant against water thus allowing you to listen to your music in bath, shower, on the beach or by the pool. IPX7 water resistance guarantees the unit’s function with slight splashing or immersing in water 1m deep for up to 30 minutes. Full immersion is not recommended because of possible loss of the audio playback signal.

Caution: Remember to always seal the BT speaker’s inputs with the original blind plug (No.7-9 on the “BT speaker description” figure) and make sure the plug is not damaged.
Never charge the unit during possible contact with fluids. The unit is designed for contact with clean water only without any additives. Avoid exposing the unit to contaminated or industrially treated fluids (such as lemonade, sea/salt water, oils, etc.).

Speaker reset

If the BT speaker freezes or the Bluetooth connection fails, please use the Reset feature. Hold down the BT speaker power button for 10 seconds to reset the device.

Technical specifications

• BT speaker power output: 20W RMS
• Maximum power output of the BT speakers when the TWS feature is used: 40W RMS 1 full-range “Racetrack” speaker + 2 passive radiators
• Driver size: 90 × 52mm
• Protection level: IPX7
• Bluetooth: V5.0
• Maximum transmitter power: 100mW @ 2.4GHz – 2.4835GHz
• BT profiles: A2DP 1.3, AVRCP 1.6, HFP 1.7, SPP 1.2
• Codec: SBC
• DSP (digital signal processor)
• MicroSD slot
• Supported audio formats: FLAC, MP3, WMA
• AUX-IN (3.5mm stereo jack)
• Maximum playback time: up to 9 hours
• Maximum standby time: up to 47 hours
• Maximum charging time: ≤ 2.5h
• Maximum connecting distance: up to 15m
• Frequency response: 90Hz – 18,000Hz
• Sensitivity: 95dB +/- 3dB @ 1kHz
• Impedance: 3Ω ± 10%
• Rechargeable battery: 2000mAh / 7.4V Li-Ion (4000mAh / 3.7V)
• Charging port: USB-C (DC 5V/2A)
• Package contents: BT speaker, eyelet, USB charging cable, 3.5mm jack to jack audio cable, user’s manual
• Dimensions: 190 × 84 × 84mm (W × H × D)
• Weight: 557g

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it.

Changes to the text, design and technical specifi cations may occur without prior notice and we reserve the right to make these changes.

FAST ČR, a.s. hereby declares that the radio device type BBS 5500 conforms to the 2014/53/EU directive.

For full version of the EU declaration of conformity, please refer to:
www.buxton.cz

Address of the manufacturer: FAST ČR, a. s., U Sanitasu 1621, Říčany CZ-251 01

References

• Sluchátka Buxton - vstup do svÄ›ta hudby | Buxton

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>