BEGA 50 910.4 Wall Light Satin White Instruction Manual

BEGA 50 910.4 Wall Light Satin White

Specifications

• Luminaire housing: Aluminium
• Surface colour: Velvet white
• Inside hue: Matt brass
• Light source: LED
• Power supply: 220-240 V, 50-60 Hz DC 196-250 V
• DALI-controllable with 1 address
• Weight: 4.5 kg
• Energy efficiency class: D

Product Description

This wall luminaire from the STUDIO LINE features a white metal housing with a light source shielded to the front and a metallic inside colour for reflection.

Usage Instructions

Installation and Safety

• The installation and operation of this luminaire must adhere to national safety regulations and should only be carried out by a qualified electrician. The manufacturer is not liable for damages due to improper use or installation.

Power Supply

• The luminaire operates on an LED power supply unit that requires 220-240 V at 50-60 Hz DC 196-250 V. Ensure proper connection to avoid damage.

DALI Control

• This luminaire is DALI-controllable with a single address. Use digital control to adjust settings as needed.

Temperature Regulation

• The luminaire features temporary thermal regulation to protect temperature-sensitive components without shutting down the light.

Maintenance

• When handling the luminaire, remember that LEDs are high-quality electronic components. To access internal components, carefully remove the mounting plate and plastic cover.

FAQ

Q: What should I do if the luminaire is not functioning?

A: Check the power supply connection, ensure proper DALI control settings, and inspect for any visible damage. If issues persist, consult a qualified electrician.

Q: Can I install this luminaire outdoors?

A: This luminaire is designed for indoor use only.

Dimension

Instructions for use

Application

• Wall luminaire · Indoor luminaire with velvet white metal housing.
• Luminaire with light source shielded to the front and metallic inside colour of the reflection surface.
• Radial light emission 360°.

Product Description

• Wall luminaire “STUDIO LINE”
• Luminaire housing made of aluminium, surface colour velve t white inside hue matt brass
• Synthetic cover, translucent white
• 2 mounting holes ø 4.5 mm
• Distance apart 190 mm
• 1 cable entry for through-wiring for mains cable
• Connecting terminals 2.5@
• Earth conductor terminal 2-pole connecting terminal for digital control
• Complies with flicker requirements under IEEE 1789,
• DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit 220-240 V x 0/50-60 Hz
• DC 196-250 V
• DALI-controllable
• Number of DALI addresses: 1
• Basic insulation is provided between the mains and control cables
• BEGA Thermal Control®
• Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
• Safety class I
• Conformity mark
• Weight: 4.5 kg
• This product contains light sources of energy efficiency class(es) D

Safety

• The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage under DIN EN 61547.
• To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

Lamp

• Module connected wattage 23.1 W
• Luminaire connected wattage 25.8 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 40 °C

50 910.4 K3

• Module designation LED-1174/930
• Colour temperature 3000 K
• Colour rendering index CRI > 90
• Module luminous flux 3655 lm
• Luminaire luminous flux 699 lm
• Luminaire luminous efficiency 27,1 lm / W

Installation

• LEDs are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• Remove the mounting plate with the LED unit from its packaging.
• Loosen the black knurled screw (slotted) and remove the round made of synthetic material from the LED unit.
• Pass the power connecting cable through the cable entry in the mounting plate.
• Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface.
• Establish the earth conductor connection on the earthing screw ( ) of the mounting plate.
• Make the electrical connection to the terminals.
• Observe the correct configuration of the connecting cable. Connect the live conductor to the brown wire (L) and the neutral conductor to the blue wire (N).
• The two connecting terminals marked DA, and DA are provided for digital control purposes.
• If these terminals are not assigned, theluminaire will work with full light output.
• Insert the round made of synthetic material back into the LED unit and tighten the black knurled screw (slotted).
• Unpack the luminaire housing and carefully guide it over the LED unit.
• The luminaire can be rotated 360° on the mounting plate.
• Position and align the luminaire housing on the mounting plate and tighten the locking screw on the side.

Cleaning Maintenance

• Clean the luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module Replacing the power supply unit

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
• Disconnect the system from the power supply.
• Loosen the locking screw on the side and lift the luminaire housing off the mounting plate.
• Loosen the black knurled screw (slotted) and remove the round made of synthetic material from the LED unit.
• Disconnect the earth conductor connection and the electrical connection to the terminal.
• Loosen the mounting screws of the power supply unit, the round blank bracket and earthing screws (Torx).
• Remove the pot with an LED module. Install the replacement pot.
• Please follow the installation instructions for the LED module.
• Replace defective LED power supply unit.
• Install in reverse order.

Spares

• Synthetic cover 15 000 650 B2
• LED power supply unit DEV-0305/500i
• LED module 3000 K LED-1174/930
• Round blank Ø 500 71 003 452 B18
• Round blank Ø 400 75 004 767
• BEGA Gantenbrink-Leuchten KG
• Postfach 31 60
• 58689 Menden
• info@bega.com
• www.bega.com

Documents / Resources

| BEGA 50 910.4 Wall Light Satin White [pdf] Instruction Manual
50 910.4 Wall Light Satin White, 50 910.4, Wall Light Satin White, Light Satin White, Satin White, White
---|---

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>