BEGA 85 158 Performance Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85 158 Performance Floodlight
Product Information
Product Usage Instructions
Product Description
Safety
Dimension
Installation
Cleaning & Maintenance
Replacing the LED module
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85 158 Performance Floodlight

Product Information

Specifications:

Luminaire made of aluminium alloy, aluminium, and stainless steel
Silicone gasket
Reflector surface made of pure aluminium
LED power supply unit: 220-240 V x 0/50-60 Hz DC 176-264 V
DALI-controllable with 1 DALI address
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK08
Weight: 5.9 kg

Product Usage Instructions

Installation and Safety:
The installation and operation of this luminaire are subject to national safety regulations. Only a qualified electrician should carry out installation and commissioning. The manufacturer is not liable for damage due to improper use or installation. Any modifications made to the luminaire should be done by a qualified person.

Overvoltage Protection:
The electronic components in the luminaire are protected against overvoltage as per DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components. Visit our website at www.bega.com for more information.

Maintenance:
To ensure optimal protection of electronic components, use bounce-free switching contacts like an electronic relay (solid-state relay). For specific products, consider using BEGA 71 320 for ideal protection.

Mounting:
Secure the screw connections from loosening on site. Check the earth conductor connection for proper tightening with the following torque values:

Internal hex screw = 12 Nm
Hex nut = 35 Nm

FAQ:

Q: Can this luminaire be used for both interior and exterior lighting applications?
A: Yes, this luminaire is suitable for a variety of interior and exterior lighting applications.
Q: What is the weight of the product?
A: The weight of the luminaire is 5.9 kg.

Application
Performance floodlight with G½ mounting bush. The floodlight can be bolted together with any female thread G½ according to ISO 228 supplied by others or to BEGA accessories. For a variety of interior and exterior lighting applications.

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver
Clear safety glass
Silicone gasket
Reflector surface made of pure aluminium BEGA Hybrid Optics®
Rotation range of floodlight 350°
Swivel range -30°/+95°
Mounting bracket with G½ threaded connection
Thread length: 14 mm
Connecting cable X05BQ-F 5 G 1 mm²
Cable length 1 m
BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit
220-240 V 0/50-60 Hz
DC 176-264 V
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK08
Protection against mechanical
impacts < 5 joule
– Conformity mark
Wind catching area: 0.053 m²
Weight: 5.9 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com. The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Dimension

$BEGA-85-158-Performance-Floodlight- $1$$

Installation

Screw the floodlight G½ threaded connection firmly into the on-site G½ female thread or BEGA accessory. G½ threaded connection torque = 40 Nm. Secure the screw connection from loosening on site (if provided with locking screw S, see fig. A). Check the earth conductor connection between the G½ threaded connection and the on-site G½ female thread.

Adjust floodlight:

Undo hexagon socket screw (wrench size 6 mm) and hexagon nut (wrench size 30 mm) and set the desired beam direction.
Torque:
- Hexagon socket screw = 12 Nm
- Hexagon nut = 35 Nm
Secure bolted connection Gß against loosening by tightening the hexagon socket screw (wrench size 2 mm, see sketch B).

$BEGA-85-158-Performance-Floodlight- $4$$

The electrical connection must be carried out with matching protection class and safety class, strain-relieved, with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable. Note correct configuration of the mains supply cable. The earth conductor is connected at the green-yellow ( ), the phase to the brown (L), and the neutral conductor to the blue (N) marked wire. The connection of the control cables is achieved by means of the both leads marked with DALI. In case these leads are not used the luminaire will be operated at full light output.

Lamp

Module connected wattage 71.1 W
Luminaire connected wattage 76 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 40 °C

85 158 K3

Module designation LED-0442/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 10550 lm
Luminaire luminous flux 7837 lm
Luminaire luminous efficiency 103,1 lm / W

85 158 K4

Module designation LED-0442/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 10710 lm
Luminaire luminous flux 7956 lm
Luminaire luminous efficiency 104,7 lm / W

Light technique
Symmetrical wide beam light distribution Half beam angle 27° For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Cleaning & Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high pressure cleaners.

Maintenance
The connecting cable must be checked for external damage and may only be replaced by a qualified electrician.

Please note:

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system.

Open the floodlight:

Undo locking pin (hexagon socket head wrench size 2.5 mm) on the back side of the floodlight housing.
Remove the trim ring along with the safety glass and reflector by twisting it counter-clockwise.
Replace LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Place trim ring with glass and reflector on the floodlight housing in such a way that the notches in the trim ring and floodlight housing align on top to each other.
Twist on the trim ring clockwise as far as the stop. Tighten locking pin.