BEGA 71321 Technical Amendments Reserved Instruction Manual

Table of Contents

BEGA-71321-Technical-Amendments-Reserved-PRODUCT

Connecting the power supply unit requires a mains plug, which must be ordered separately.
The various country-specific mains plugs with 0.5 m connecting cables are available as accessories.
Ensure the luminaire and the power supply unit are not more than 100 meters apart.
Insert the plug (input) into the jack (output) of the connecting cable with a country-specific hands plug and screw them together finger-tight.
Connect a luminaire, a Smart Link, an extension cable, or distribution boxes for additional luminaires to the jack (output) of the power supply unit.
Do not use tools for tightening or loosening screw connections. Clean the outputs if necessary, but do not use high-pressure cleaners or abrasive cleaning agents.
After a successful electrical connection, configure the system using the BEGA Smart app.

Q: What is the maximum connected wattage for the luminaires?
A: The maximum connected wattage for the luminaires connected to the power supply unit is 100 W.
Q: How far apart can the luminaire and power supply unit be?
A: The maximum cable length between the luminaire and the power supply unit must not exceed 100 m when the power supply unit is at full capacity.

BEGA-71321-Technical-Amendments-Reserved-FIG-1

Application

Electronic 48 V DC power supply unit with an output of max. 100 W for the connection of BEGA UniLink® Play luminaires, allowing easy on-ground routing without costly earthworks.
The power supply unit supports the operation of multiple BEGA UniLink® Play luminaires.
Please take note of the maximum output of the power supply unit.
Connecting the power supply unit requires a mains plug, which must be ordered separately (see accessories).
BEGA UniLink® Play is a system for smart garden lighting that is controlled via app, remote control or automation.
All connection cables and components are installed above ground in the area of use.
Thanks to the IP 67 standard, they are weather-resistant year-round and highly durable.
After a successful electrical connection, they can be configured in the BEGA Smart app.

Housing made of synthetic material
Housing moulded inside
Colour graphite
Connecting cable X05RN-F FEP 2 × 1@ + 1G2,5@ with 1 input plug connector (plug BEGA UniLink®)
Cable length 5 m
Supply voltage: 220-240 V 50/60 Hz 1 output plug connector (coupling BEGA UniLink® Play)
Cable length 0.3 m
Connected wattage 0-100 W, 48V DC
Operating temperature: -40°C to 65°C
Safety class I
Protection class IP 67
Dust-tight and protection against temporary immersion
– Conformity mark
Weight: 1.6 kg

Safety

The installation and operation of this power supply unit is subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
Should the power supply unit be subsequently modified, the persons responsible for the modification shall be considered the manufacturer.

Installation

Connecting the power supply unit requires a mains plug, which must be ordered separately.
The various country-specific mains plugs with 0.5 m connecting cables are available as accessories.
Another option is a connection to a 230 V output of the BEGA UniLink® system.
The maximum connected wattage for the luminaires connected to the power supply unit is 100 W.
Insert the plug (input) into the jack (output) of the connecting cable with a country-specific mains plug and screw them together fingertight.
A luminaire, a Smart Link, an extension cable and distribution boxes for additional luminaires can be connected to the jack (output) of the power supply unit.
The maximum cable length between the luminaire and the power supply unit must not exceed 100 m when the power supply unit is at full capacity.
Do not use tools for the tightening or loosening of the screw connections.

Clean housing regularly with solvent-free cleaning agents to remove dirt and deposits.
Do not use high-pressure cleaners.
If necessary, clean the outputs.

Accessories
BEGA UniLink® 230 V 0.5 m connecting cable with country-specific mains plugs