BEGA 67 479.2 Table Lamp Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 67 479.2 Table Lamp
Product Information
Product Description: The product is a luminaire made of stainless steel, weighing 1.9 kg.
Lamp Information: The luminaire uses lamps with a screw base E 27 and a maximum output of 100 W. The light sourcesin this product belong to energy efficiency class E.
Luminaire Efficiency: The luminaire has an efficiency of 80%.
Technical and Lighting Data: Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product Usage Instructions
Safety: The installation and operation of this luminaire are subject to
national safety regulations. The manufacturer does not accept liability for
damage caused by improper use or installation. If modifications are made to
the luminaire, the person responsible for these modifications will be
considered the manufacturer.
Installation:
- Insert the lamp into the lampholder.
- Insert the glass into the luminaire housing and screw it in by turning it clockwise. Make sure that the gasket is seated correctly.
- Connect the luminaire to the mains supply (230 V).
- To turn the luminaire on or off, use the toggle switch in the lamp base.
Cleaning:
- Clean the luminaire and glass using maintenance products that do not contain solvents.
Lamp Replacement:
- To replace the lamp, unscrew the glass from the luminaire housing.
Spares:
- Spare glass
- LED lamp 2700 K
- LED lamp 3000K
- Lampholder
- Push button
Please refer to the provided codes for ordering the spare parts:
- Spare glass: 11 002 926 41R G 13 565 13 592
- LED lamp 2700 K: 63 000 339
- LED lamp 3000K: 63 000 421
Dimension
Table lamp for indoor use
Application
Table lamp · indoor luminaire made of metal base and hand-blown opal glass for free radiating and glare-free light.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 100 W
- This product contains light sources of energy
- efficiency class E
- Supplied lamp
- BEGA LED lamp 13565
- LED Retrofit 12 W · 1400 lm · 2700 K
- dimmable
- Supplied lamp
- BEGA LED lamp 13592
- LED Retrofit 12 W · 1400 lm · 3000 K
- dimmable
- Luminaire efficiency: 80%
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product description
- Stainless steel housing
- Hand-blown opal glass, with screw neck
- Black cable · 2 m, with safety plug
- Built-in toggle switch
- Lampholder E 27
- Safety class I
- – Conformity mark
- Weight: 1.9 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Insert lamp into lampholder.
- Insert glass into the luminaire housing and screw it in by turning it clockwise.
- Make sure that the gasket is seated correctly.
- Connect luminaire to mains supply (230 V).
- To turn the luminaire on or off use the toggle switch in the lamp base.
Relamping · Maintenance
- Disconnect the electrical installation.
- Unscrew glass from luminaire housing.
- Clean luminaire and glass.
- Use only solvent-free cleansers.
- Change the lamp.
- Screw glass into luminaire housing.
Spares
Spare glass 11 002 926 41R G
LED lamp 2700 K 13 565
LED lamp 3000K 13 592
Lampholder 63 000 339
Push buttom 63 000 421
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>