BEGA 50201.5 Wall Washer for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50201.5 Wall Washer for Indoor Use
Product Information
Product Usage Instructions
DIMENSIONS
Instructions for use
Safety
Overvoltage protection
Installation
Cleaning · Maintenance
Replacement of the LED module
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50201.5 Wall Washer for Indoor Use

Product Information

The product is a luminaire that emits light. It has differentLED modules with varying color temperatures, color rendering index, module luminous flux, luminaire luminous flux, and luminaireluminous efficiency. The luminaire is designed to be installed and operated in accordance with national safety regulations. It isrecommended to have the installation and commissioning carried out by a qualified electrician. The manufacturer does not accept liability for any damage caused by improper use or installation. Overvoltage protection is included in the luminaire, but additional protection components are recommended for extra protection against transients.

Product Usage Instructions

Ensure that the luminaire is installed and operated in compliance with national safety regulations.
Have the installation and commissioning performed by a qualified electrician.
If modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
For additional protection against transients, it is recommended to use separate overvoltage protection components.
Refer to the manufacturer’s website at www.bega.com for available overvoltage protection components.
To replace the LED module, follow these steps:
Disconnect the system and open the luminaire.
Locate the label in the luminaire that indicates the designation of the LED module.
Obtain a replacement module with matching light color and light output.
Use standard tools to replace the module. Qualified persons can perform this task.
Follow the installation instructions provided for the LED module.
If the glass is defective, replace it before closing the luminaire.
Close the luminaire after completing the replacement.

DIMENSIONS

Instructions for use

Application

Wall washer · indoor luminaire with asymmetrical light distribution for illuminating wall and ceiling surfaces.
The luminaire can be installed with the light distribution opening upwards or downwards.

Product Description

Die-cast aluminum and aluminum housing, finish Colour velvet black
Matt safety glass
Reflector made of pure anodised aluminum 2 mounting holes ø 4.5 mm
Distance apart 200 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@
Connecting terminal and earth conductor terminal 2.5@
2-pole connecting terminal for digital control
LED power supply unit 220-240 V x 0/50-60 Hz DC 170-276 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire Safety class I
Impact strength IK07
Protection against mechanical
impacts < 2 joule
– Safety mark
CE – Conformity mark
Weight: 2.9 kg
This product contains light sources of energy efficiency classes D, E

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 32.7 W
Luminaire connected wattage 36.1 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

50 201.5 K27

Module designation LED-0609/927
Colour temperature 2700 K
Colour rendering index CRI > 90
Module luminous flux 4675 lm
Luminaire luminous flux 3253 lm
Luminaire luminous efficiency 90,1 lm / W

50 201.5 K3

Module designation LED-0609/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 4830 lm
Luminaire luminous flux 3361 lm
Luminaire luminous efficiency 93,1 lm / W

50 201.5 K4

Module designation LED-0609/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 5025 lm
Luminaire luminous flux 3501 lm
Luminaire luminous efficiency 97 lm / W

Installation

Undo hexagon socket head screws (wrench size 3 mm) through the opening in the luminaire housing up to the stop and lift luminaire top.
Loosen earth connection (plug connection) and LED connection between luminaire top and luminaire base.
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Lead the main supply cable through the cable entry of the luminaire base.
Ensure correct directionality towards the area to be illuminated.
Fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Make the earth conductor connection and the electrical connection.
For digital control please use the connecting terminal DA, DA.
In case this terminal is not used the luminaire will be operated at full light output.
Make earth connection (plug connection) and LED connection between luminaire top and luminaire base again.
Install the luminaire top, press on and tighten screws evenly.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Close the luminaire.