LOREX ACSOL3 Solar Panel User Guide
- June 1, 2024
- Lorex
Table of Contents
LOREX ACSOL3 Solar Panel
Specifications
- Solar Panel Series: ACSOL3 Series
- Manufacturer: Lorex
- Power Source: Solar
- Adapter Type: MicroUSB
- Mounting Anchors & Screws: 6 included
- Additional Accessories: Bracket, MicroUSB Adapter, Drill Bit, Drywall Anchors
Product Usage Instructions
Mounting the Solar Panel
- Set the Bracket to the desired mounting position.
- Mark holes through the Bracket.
- Using the included drill bit, drill holes where marked.
- Secure the Bracket with the provided screws. Use drywall anchors if mounting on drywall.
- To adjust the Bracket angle, follow the provided instructions.
- Twist the solar panel onto the Bracket.
- Adjust the angle of the solar panel for direct sunlight.
- Tighten the Adjustment Ring to secure the position.
Connecting the Solar Panel to Camera
- Run the Solar Panel cord to the camera location.
- Pull up the power port cover on the camera.
- Connect the Solar Panel cord to the camera’s power port.
Using MicroUSB Adapter
- Connect the MicroUSB Adapter to the Solar Panel cord.
- Connect the adapter to the camera’s power port.
Checking Power Status
Open the Lorex Home app and check the device battery status to ensure the
Solar Panel is receiving sufficient light for operation.
FAQ
-
Q: Can I mount the Solar Panel on a different surface other than drywall?
A: Yes, you can mount the Solar Panel on various surfaces usingappropriate mounting hardware. -
Q: How do I know if the Solar Panel is charging my device properly?
A: Check the device battery status on the Lorex Home app to ensure the Solar Panel is receiving enough light for charging. -
Q: What should I do if I encounter issues during installation?
A: If you face any difficulties during installation, consult a licensed electrician or installer for assistance.
Quick Start Guide
ACSOL3 Series
Solar Panel
lorex.com
What’s Included
Tools Needed
- Drill
- Screwdriver
Installation Tips
- Choose a location for the solar panel with plenty of direct sunlight exposure. Do not install in a covered or shaded area. Performance is dependent on temperature and light exposure.
- Make sure to fully charge the camera battery pack.
- Refer to the product documentation for charging instructions.
- (Optional) To install the camera without any gaps between the device and the wall, drill holes to run the Solar Panel power cord through the wall.
Always be careful of existing wiring, pipes or other hazards when drilling. If you are not comfortable doing it yourself, consult a licensed electrician or installer.
Installation
-
Set the Bracket to the desired mounting position.
-
Mark holes through the Bracket.
-
Using the included drill bit, drill holes where marked.
-
Using a screwdriver, secure the Bracket with the provided screws.
Optional : If you are mounting the Solar Panel into drywall, use the provided drywall anchors. -
To adjust the Bracket, loosen the Bracket adjustment ring by turning it counterclockwise.
-
Turn the Bracket’s Threaded Ring counterclockwise, to lower the Ring.
-
Twist the solar panel clockwise onto the Bracket.
-
Adjust the angle of the solar panel to receive direct sunlight, then tighten the Adjustment Ring.
-
Connect the Solar Panel cord to the desired adapter.
Connect Directly to a Camera
- Run the Solar Panel cord to the camera.
- Pull up the power port cover on the camera, and then connect the Solar Panel cord to the camera.
Check the compatibility chart at lorex.com for up-to-date information about product compatibility.
Connect the Adapter to a Camera
- Connect the MicroUSB Adapter to the Solar Panel cord.
- Run the Solar Panel cord to the camera.
- Pull up the power port cover on the camera.
- Connect the adapter to the camera power port.
Check the Battery Status
Open the Lorex Home app, and then check the device battery status to ensure
the Solar Panel is receiving enough light to power on the device.
Need Help?
For the additional support material, scan the below QR code or visit:
help.lorex.com/ACSOL3Series
Register Your Product
Please see our full Terms of Service and Limited Hardware Warranty Policy at:
lorex.com/warranty
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Copyright © 2023 Lorex Technology Inc.
As our products are subject to continuous improvement, Lorex reserves the
right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>