LOREX AP24V500B Doorbell Power Adapter Instruction Manual

LOREX AP24V500B Doorbell Power Adapter

Product Information

Specifications:

• Product Name: Doorbell Power Adapter
• Model: AP24V500B Series
• Plug Type: UK Plug
• Includes: Screws (x12)

Product Usage Instructions

• Step 1: Attaching the Plug to the Power Adapter

1. Align the back of the Plug to the Doorbell Power Adapter prongs.
2. Press the Plug into the Power Adapter.

• Step 2: Securing the Connection
  Turn the Plug clockwise until you hear a click indicating it is locked in place.

• Step 3: Connecting the Cable
  Connect the Cable to the Power Adapter.

• Step 4: Installation

1. Select an outlet near the doorbell.
2. Run the cable from the doorbell to the outlet.
3. (Optional) Secure the cable using provided cable clips.
4. (Optional) To eliminate gaps, drill holes to run the Cable through the wall (be cautious of existing hazards).

• Step 5: Finalizing Installation

1. Completely remove the power port terminal screws from the doorbell using a Philips-head screwdriver.
2. Thread the screws through the metal loops of the Cable and tighten them clockwise.
3. (Optional) Push the wiring back into the wall ensuring there is enough space for the cable.
4. Connect the Power Adapter to the outlet.

FAQ

• What should I do if I am not comfortable drilling holes in the wall?
  If you are not comfortable with drilling, it is recommended to consult a licensed electrician or installer for assistance to avoid any potential hazards.

• How do I ensure a secure connection between the Plug and Power Adapter?
  Make sure to align the Plug correctly with the Power Adapter prongs and turn it clockwise until you hear a click sound, indicating that it is securely locked in place.

What’s Included

Tools Needed

• Drill
• Screwdriver

Setup

1. Align the back of the Plug to the Doorbell Power Adapter prongs, and then press the Plug into the Power Adapter.
2. Turn the Plug clockwise. You will hear a “click” when locked in place.
3. Connect the Cable to the Power Adapter.
4. Select an outlet near the doorbell.
5. Run the cable from the doorbell to the outlet.
6. (Optional) Secure the cable using the provided cable clips.
7. (Optional) To install the doorbell without any gaps between the doorbell and the wall, drill 2 holes to run the Cable through the wall.

Always be careful of existing wiring, pipes or other hazards when drilling.
If you are not comfortable doing it yourself, consult a licensed electrician or installer

8. Completely remove the power port terminal screws from the doorbell with a Philips-head screwdriver.
9. Thread the screws through the metal loops of the Cable, and then tighten the screws clockwise.

10. (Optional) Push the wiring back into the wall. Make sure there is enough space to fit the cable into the hole in the wall.
11. Connect the Power Adapter to the outlet.

Compatibility

For the product compatibility chart please visit: lorex.com/pages/compatibility

Register your product

Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/pages/warranty

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Copyright © 2023 Lorex Technology Inc

As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.

References

• Product Compatibility Chart - Expand Your System | Lorex
• Lorex Limited Warranty - Exceptions, Obligations | Lorex

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>