LOREX N910 Series 4K Ultra HD 12MP 16 Camera Capable User Guide

Quick Start Guide
N910 Series

What’s Included

Recorder Overview

1. Hard Drive, Power & Network Statuses
2. USB Port
3. Info/Panic Button
4. Power Connection
5. Camera Connection (PoE)
6. Network Connection (LAN)
7. Monitor Connection (VGA)
8. Audio Out/In
9. Monitor Connection (HDMI)

Connect Your Wired Camera

Connect your camera directly to your recorder using the camera’s Ethernet extension cable.
*May be sold separately

Setup Your Recorder

1. Connect your recorder to your Wi-Fi router using the included Ethernet cable.
   Required for Fusion Setup.

2. Connect the included USB mouse to the USB port on your recorder. To copy events or to perform a firmware update, connect a USB flash drive.

3. Connect your recorder to your TV using the included HDMI cable. The HDMI supports up to 4K resolution and VGA supports up to 1080p.

4. Connect the included power adapter to your recorder and a power outlet. Complete the Lorex Setup Wizard and select Network Setup when prompted.

Download the Lorex Home App

To enable remote viewing, ensure that you:

• Have high-speed Internet
• Have an upload speed of 6 Mbps for one 4K+ channel and at least 24 Mbps for the whole system
• Locate your recorder’s Device ID QR code

To connect your recorder to the app:

1. Download Lorex Home app. https://app.lorex.com/home/download
2. Tap + .

Connect Your Fusion Wi-Fi Camera

Ensure your Fusion Wi-Fi camera and recorder are connected to the same Lorex Home app account and network.

1. Turn your Fusion Wi-Fi camera on.
2. Open Lorex Home app.
3. Tap + . Save your newly created Fusion Wi-Fi camera password for later.
4. From your recorder’s Live View, click on a channel + .
5. Click Device Search.
6. Double-click your Fusion Wi-Fi camera.
7. Enter your Fusion Wi-Fi camera’s password created in-app.
8. Give your Wi-Fi camera a few mintues to establish a connection.

Note: You can add up to 8 Lorex Fusion Wi-Fi devices.

Managing Your Notifications

After setup, your Fusion Wi-Fi camera is connected to the app twice.
Turn off your camera’s alerts to prevent getting the same notification twice.

1. Open Lorex Home app.
2. Under your recorder, swipe left to find your Fusion Wi-Fi camera.
3. Tap > Turn off Alerts > Save.

Need Help?

For related support, scan the QR code or visit:

help.lorex.com/N910lorex.com/fusion

Register Your Product

Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/warranty
Copyright © 2023 Lorex Technology Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
**** This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

References

• Security Cameras - Home Security Camera Systems | Lorex
• Lorex Fusion

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>