heeyoo Elevated Dog Bed with Canopy Installation Guide
- May 15, 2024
- heeyoo
Table of Contents
heeyoo Elevated Dog Bed with Canopy
Product Specifications
- Legs: 4 pieces with metal rod connectors
- Glass Fiber Rod Connectors: 10 pieces
- Plastic Plugs: 4 pieces (connect glass fiber rod to the leg)
- Canopy: 1 piece
- Short Chamfered Edge and Tapered Metal Pipe: 6 pieces
- Long Chamfered Edge Metal Pipe: 2 pieces
- Long Vertical Section Metal Pipe: 2 pieces
- Glass Fiber Rods: 10 pieces
- Mesh Pet Bed Mat: 1 piece
Product Usage Instructions
Assembly Instructions
- Connect the side pipes: Longer side rails (e x 2) + (g x 1), short side pipe (f x 1). Insert the connected side pipes through the pockets on the side of the mat (i). Insert the pipe into the leg (a) corner pieces.
- Before inserting the final pipe, raise the last leg in the air to create enough slack in the mat to insert the final pipe. Then close the Velcro.
- Connect 5 sections of glass fiber rod (h) with connector (b).
- Cross-insert through the pockets on the top of the canopy (d). Put the plastic plug (c) on the end rod. Then insert the plug into the top of the leg connector.
Frequently Asked Questions (FAQ)
Q: How do I clean the pet bed mat?
- A: The pet bed mat can be spot-cleaned with a mild detergent and water.
- Allow it to air dry completely before reassembling.
Q: Can the canopy be removed for washing?
- A: Yes, the canopy can be detached for washing.
- Follow the assembly instructions in reverse to remove and reattach it after washing.
PARTS INCLUDED
- a. Leg x 4 pcs (include metal rod connector)
- b. Glass fiber rod connector x 10 pcs
- c. Plastic plug x 4 pcs (connect glass fiber rod to the leg)
- d. Canopy x 1 pc
- e. Short chamfered edge and tapered metal pipe x 6 pcs
- f. Long chamfered edge metal pipe x 2 pcs
- g. Long vertical section metal pipe x 2 pcs
- h. Glass fiber rod x 10 pcs
- i. Mesh pet bed mat x 1 pc
Assembly Instructions
- Connect the side pipe. Longer side rails: (e x 2 pcs) + (g x 1 pc), short side pipe: (e x 1 pcs) + (f x 1 pc). Insert the connected side pipes through the pockets on the side of the mati). Insert the pipe into the leg (a) corner pieces.
- Before inserting the final pipe, raise the last leg in the air to create enough slack in the mat to insert the final pipe. Then close the velcro.
- Connect 5 sections of glass fiber rod (h) with connector (b). Cross-insert through the pockets on the top of the canopy (d). Put the plastic plug (c) on the end rod. Then insert the plug into the top of the leg connector.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>