IKEA VAPPEBY Bluetooth Speaker Doubles Lamp User Manual

IKEA VAPPEBY Bluetooth Speaker Doubles Lamp

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

1. USB-C port for charging.
2. Dial for Play/Pause/Volume.
3. Speaker Power On button and Spotify TapTM
4. Bluetooth Pairing button.
5. Lamp Switch button.
6. LED status light

LED status

• Flashing white: Bluetooth is pairing.
• Solid white: Paired to a device.
• Flashing red: Low battery.
• Solid red: Charging (when speaker is off)

Getting started
Use the USB-C port (1) for charging your product before the first use and whenever the LED is blinking red to indicate low battery. When charging, the LED is solid red when the speaker is off.

Recommended power supply:
5.0V DC, 2.0A, USB-C (Not included)

Lamp functions
Turning ON/OFF. Press the Lamp switch (5) once to turn it on at 100% brightness. Press again to dimm light to 50% and a third time to TURN OFF.

Speaker functions

Turning ON/OFF. A short press on the Power button (3) will TURN ON your speaker. A long press on the Power button if you wish to TURN OFF the speaker.
Play/Pause
Press the dial (2) to play or pause music.
Volume
Rotate the dial (2) clockwise to increase volume and anti-clockwise to reduce volume.

Bluetooth pairing

Press and hold (long press)to start pairing mode. The LED will start blinking. Open Bluetooth settings on your device, the speaker should be listed as VAPPEBY.

Auto-off
If the speaker is not paired to any device, it will turn off automatically after 5 minutes. In case the speaker is paired but no music is playing, it will turn off automatically after 20 minutes.

Using Spotify TapTM

Spotify TapTM lets you resume and change music directly from your Bluetooth speaker with the press of one button.

If you have an iOS device:
Go to the App Store and download the Spotify app. You will be able to create an account or login if you already have one.

If you have an Android device:
Go to the Google Play Store and download the Spotify app. You will be able to create an account or log in if you already have one.

First use
Make sure your device is paired via Bluetooth to your VAPPEBY speakers. Make sure the Spotify mobile app is open. This will only be needed on the first use. Press the Power button (3) to start music. The LED indicator should blink twice.
From now on, whenever you quick press the Power button (3), the music resumes anytime your device is paired and in range.

Changing music
Press again the Power button (3) to change what’s playing to a recommended track.

Good to know

• Suitable for outdoor use, since it is protected against moisture and water according to IP65
• Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, the age of the battery and the temperature in the surrounding area.
• Storage temperature: -20°C to 25°C (-4°F to 77°F).
• Unplug the product from the power supply before cleaning and when it is not in use.
• It is normal for the battery to become hot during charging and it will gradually cool down after charging.
• Battery should not be left discharged for a longer period.
• Battery should not be charged while in contact with flammable material like textiles.

WARNING

• Never install the product in a confined space.
• Always leave a space of at least 5 mm around the product for ventilation.
• Children should be supervised to ensure they do not play with the product.
• Do not modify, disassemble, open, drop, crush, puncture, or shred battery.
• Do not expose the battery to rain or water.
• Risk of fires and burns. Do not open, crush, heat above 140°F (60°C), or incinerate.
• Keep battery away from open flame or sunlight to prevent heat build-up.
• Keep battery away from high voltage devices.
• This product is not a toy, keep away from children. Ensure that all persons who use this product read and follow these warnings and instructions.
• Do not short-circuit the battery or its cells.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.

Save these instructions for future use.

Care instructions
To clean the product, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry.
Note!
Never use abrasive cleaners or chemical solvents as this can damage the product.

Product servicing
Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

RF EXPOSURE INFORMATION
According to RF exposure regulations, under normal operations, the end-user shall refrain from being closer than 20 cm from the device.

Technical data

• Model Name: VAPPEBY
• Type Number: E2004
• Battery capacity: 2 x 3300 mAh/23.7 Wh, Li-ion
• Input: 5.0V DC, 2.0A, 10W USB Type-C
• Estimated battery playtime at 50% Volume and Bluetooth mode: -50% display brightness: 11 – 13 h
• Operating temperatures: 0°C to 45°C (32°F to 113°F)
• Operating humidity: 0 to 95%RH
• Operating Frequency: 2400-2483.5 MHz
• Radio output power: 4 dBm (EIRP)
• Bandwidth: 1 MHz
• Decorative light: 20lm, 2700K
• IP Class: IP65

Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by IKEA is under license. Other trademarks and trade names are those of their respective owners.

Spotify TapTM is a trademark owned by Spotify and any use of such marks by IKEA is under license. All other Spotify trademarks service marks, trade names, logos, domain names, and any other features of the Spotify brand are the sole property of Spotify or its licensors.

This device complies with Part 15 of the FCC Rules.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>