PELEGON 400LB Raised Toilet Seat with Handles Instruction Manual

PELEGON 400LB Raised Toilet Seat with Handles

Assembly Parts List

• Bracket (Left)×1
  

• Bracket (Right)×1
  

• Seat Board Frame×1
  

• Armrest×2
  

• Foot Tube×4

• Seat Cushion×1
  

• Portable Potty×1
  

• Side Pocket×1

• Limit Buckle×5

• Tissue Holder×1

Assembly Instruction

Dear customers, please check whether the accessories are complete before you start assembling. If you have any questions, please contact us in time. We will serve you 7*24 hours a day. Email support@roylvan.com.

Assembly Method

Step 1

As shown in Figure 1, insert the bracket (left) A, A1 port against the seat board frame A, A1 port, and the bracket (right) B, B1 port against the seat board frame B, B1 port, then tighten the limit buckle. Assembly is completed as shown in Figure 2.

Step 2

Insert handles C, C1 against bracket (left) C, C1 and handles D, D1 against bracket (right) D, D1 as shown in Figure 3. Finish as shown in Figure 4.

Step 3

Install the cushion snap down hard on the bracket as shown in Figure 5. Installation is complete as shown in Figure 6.

Step 4

Insert the foot tube against the bracket E port as shown in Figure 7. Adjust to the proper height as shown in Figure 8.

Step 5

Comes with a portable potty, side storage bag, and paper hangers.

Warm Tips：
PLEASE BE SURE TO READ THE PRODUCT ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE USE TO AVOID THE RISK OF TIPPING DUE TO INCORRECT ASSEMBLY! PLEASE CONTACT US IN TIME IF YOU HAVE ANY QUESTIONS!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>