TRUCKRUN CCO3 3.5 Inch TFT Screen Display User Manual

TRUCKRUN CCO3 3.5 Inch TFT Screen Display

Product Information

Specifications

• Working Voltage: 18~60(V)
• Turn-off Power Dissipation: 5(uA)
• Current: 100(mA
• Power: -18~60
• Real-time Current: Power Current Assist Level
• Max Dissipation: CC03 Max Dissipation
• Operate Temperature: -18~60
• Static Power Dissipation: 30(mA)
• Storage Temperature: -30~60
• Waterproof Grade: IP65

Product Usage Instructions

Operating Instructions

C.1 Signs and Meanings
Signs:
Meaning

• Short press (less than 0.5s): Assist walking
• Long press (more than 2s): Switch on/off
• Gear + Gear Lamp: Bluetooth Navigation mode remind Error remind

C.2 Pre-Start-up Check
Before starting the E-bike, please check the battery and speed sensor to ensure they are installed in the right position.

C.3 Turn On/Off
Power-off state: Press and hold button until display lights up, then release button to turn on.
Power on state: Press and hold button until display lights off to turn off.

Frequently Asked Questions (FAQ)

1. Q: How do I adjust the assist gear level?
   A: To strengthen the assist by 1 gear, press the + button. To weaken the assist by 1 gear, press the – button.

2. Q: What should I do if an error is displayed on the screen?
   A: When an error is displayed, the error code will appear at the top of the screen in the Speed position.

Security Statements
For your riding safety and Enjoying use this product, please read this manual carefully and follow the instructions in the manual.。
Please pay attention on the road conditions during the cycling and don’t be distracted by the instrument to avoid the occurrence of traffic accidents. If you want to check the menu carefully, stop riding and check it.

Product specification

Usuage
This Display is used to control the e-bike drive system and display cycling data of Truckrun drive motor.
It supports customized function, support customized start-up LOGO and video.

Display menu

• a. Light
• b. Error
• c. Navigation
• d. Bluetooth
• e. Battery
• f. Battery bar
• g. Speed and Unit
• h. Speed dial scale value
• i. Dynamic velocity bar
• j. Menu level,contents:

Technical parameters

| | CC03|
---|---|---|---
Working Voltage| 18~60(V)| Max disssipation| 100(mA）
Turn-off power dissipation| 5(uA）| Operate temperature(℃）| -18~60
Static power dissipation| 30(mA)| Storage temperature(℃)| -30~60
| | Waterproof grade| IP65

Operating instructions

Signs and meanings

Pre-Start-up check
Before starting the E-bike, please check the battery and speed sensor , whether they are installed in right position.

Turn on/off

Assist walking
The bike in rest，in any gear press －，Screen shows ，After 2seconds , E-bike is in assisting walking state. Walking real speed less than2.5km/h(1.5mph) Or system doesn’t sense any speed，Display shows speed 2.5km/h(1.5mph)。Or E-bike speed more than 6km/h，the system will cut off assist output automaticly,recover previous state. Release－during assisting, E-bike will cut off assistoutput and recover previous state.

Assist gear adjustment

Error Display

When E-bike system has error，On the top shows ，Error code is on Speed position， Error code meaning check List 1。

Error display

Setting functions

System on and E-bikespeed is 0，Press +and－at the same time，get in setting meanu， Setting options as below：

Change UI style
Information| Adjust  limited  speed/wheel size/system information| Password| Set start-up password
Language| Select language| Exit| Back to main menu

Adjust power-off time automaticly

Press + or－select“Auto Off”，press again, many time options，press + or －to select  it，select and press , finish adjustment，Press－select“back”backup previous menu， Or press + and－at the same time to backup the main menu.

Notes: After setting Auto off ，meets B.1 conditions，The system will automatically shut down when the automatic shutdown time is reached，Select“OFF”It does not shut down, that is, it will keep on when the battery power supply is normal and the system is not faulty. C.9.1.3 Screen brightness
Press+or －Select“Brightness”，press will see options：10%，30%，50%，75%，100%， The higher the percentage, the brighter the screen。Press+or－select，select and press setting finished，press－select“back”backup previous menu，or press+ and －backup main menu。

Adjust max gear
Press+or－select“MAX PAS”，press will see options：3，5，9，Bigger number, higher gear。Press +or－select，select and press finish setting，Press－select“back”backup previous menu，press +and－at the same time to backup main menu.

Notes: The relationship of 3 modes gear ,please check C.6:

Adjust Light sensitivity
Press+or－select“Light sensitivity”，press will see options：Low， Mid，High. High means the strongest。Press+or－to select it，select and press finish setting，press－select“back”backup previous menu，Press +and-at the same time to backup main menu.

Select Information

Wheel size viewing and setting
Press+or－Select“Wheel Size”，Press will see options of e-bike wheel size. Press+or－Select matched wheel size. Select and press finish wheel size set，Press select“back”backup previous menu，Press+and－at the same time to back up main menu. Notes: Setted wheel size is different from real wheel size, display will has in-correct speed , milage will be in-correct.

Limited speed setting
Press+or－select“Speed Limit”，press  will see options. Press+or－select match limited speed，select and press finish setting，press－select“back”backup previous menu， or press+and－to backup the main menu。

Notes:

• Limited speeds means when the e-bike reaches setted speed, the system will cut off assistant output; It will be recovered while the speed is belowing setted speed.
• Set a very high limited speed, e-bike may not reach the limited speed.

The reasons as below: 1) Upload, 2) Road slope 3) Freewheel gear 4) Battery electric quantity.

Check display information
Press+ or －Select“Display Info”，Press again to check display’t hardware & software version No., Press  backup previous menu，Press +and－backup main menu.

Check controller’s information
Press+or－Select“Ctrl Info”，Press again to check controller’s hardware&software versions. Press  backup previous menu，Press+and－at the same time to backup main menu.

Check battery information

Press+or－Select“Battery Info”，Press again to check battery information，Press backup previous menu，Press +and－at the same time to backup the main menu.

cell’s
AbsChargeState| Absulote charge percentage| |

Historical fault code view
Press+or－select“Error Code”，press again to view Historical fault code，Press backup  to previous menu，Press+and－at the same time to backup the main menu。

Select Language
Press  will see languages：English Español Deutsch . Press+or－to select it，Select and press  to finish setting ， Press+or － select“back”to backup previous menu ， Press+and－to back up main menu.

Select Themes
Press check UI Options， Press+or－to select it，Select and press to finish it，Press+or －select“back”to backup previous menu， Press+and－to back up main menu.

Select Password

Press  will see password options：
“Back”-backup previous menu；“Start Password”-start-up password function；“Reset Password”-Reset startup password function.

The images as below:

Set startup password：

• Step1.Press+or－Select“Start Password”（Start Password state is“OFF”）。
• Step2.Press to reset it, Input password in dislog box，Press +or－to select numbers 0-9，select and confirm. After confirmation, the input position will be automatically switched to the next dialog box。
• Step3. All set and confirm，It will shows“Set Password Successfully”，means set startup password successfully，after it, the initial password setting screen is displayed. The Start Password state is“On”，Press+or－select“back”to backup previous menu， Press+and－to back up main menu.

Cancel startup password

• Step1 Press+or－Select“Start Password”（Start Password state is“On”）。
• Step2. Press to confirm，Input startup password in dialog box( existed password )， press +or－to selext numbers 0-9，Select number and press to confirm，It will skip to next dialog box.
• Step3. All selected numbers，It will show“Password Canceled Successfully”，Means canceled successfully，After the password is set successfully, the initial password setting screen is displayed，Start Password state is“Off”，Press+or－select“back”to backup previous menu， Press+and－to back up main menu.

Reset startup password

• Step1. Press+or －select“Reset Password”。
• Step2. Press to confirm，Input startup password in the dialog box ( existed password )， press +or－to select numbers 0-9，selected and confirm it，it will skip to next dislog box.
• Step3. After input existed password, it will show input a new password.
• Step4. Input new password, it will remind you to confirm it, it needs input it again.
• Step5. After a new password input, it will show“Reset Password Successfully”，means reset successfully，，after it, the initial password setting screen is displayed. Press+or－select“back”to backup previous menu， Press+and－to back up main menu.

Bluetooth Navigation

Run TRUCKRUN APP，Connect to display CC03via bluetooth，When you run the navigation in the APP, It will show navigation menu, and the path indicator information will  be displayed in the form of arrows and numbers.，app steps as below:

• Step1. Trun on TRUCKRUN，connect to CC03 display，Press Navigation button to start navigate menu in app.
• Step2. Press   search  in navigation menu，search map。
• Step3. Input desitination in search box, press search to reback navigation UI.
• Step4. The path information will be showed in the Navigation UI.

Start running navigation
It starts navigating ，CC03display will show navigation UI automaticlly.
Arrows and numbers indicate how many meters to go straight, turn left, turn right, and display the remaining distance from the destination and other information.

Product installation

• Step1. Open the display’s handle wrist, cover the handlebar in the appropriate operating position, adjust the auxiliary switch Angle, it is easier to see the switch and convenient operation when riding. ( It suits for outer diameter bar ‘s size φ22.2/φ31.8mm)

• Step2. Fix and tighten the matching handlebar fixed hex socket head screw with a hex wrench（Tighten torque：0.8N.m）

• Screw locking torque, excessive torque caused by instrument damage does not belong to the scope of warranty.

  • Step3. PLug-in connector with integrated wiring harness as indicated.

Warranty

Wuxi Truckrun Motor Co., LTD. (hereinafter referred to as “Truckrun Motor”) guarantees that during the warranty period, Truckrun Motor provides warranty services to vehicle manufacturers and dealers which purchased from Truckrun Motor. If the quality problem are parts, materials and technology, Warranty services will be provided by Truckrun Motor.

Warranty Period and range

• The warranty within 18months, from the Truckrun motor products leave factory date.
• If the damage is caused by one of the following circumstances, it is not covered by the warranty:
  • Damage caused by modification, neglect & improper maintenance, use for competition & commercial purposes, misuse & abuse, and traffic accidents;
  • Damage occurred during the customer’s transportation;
  • Product damage caused by unreasonable installation, debugging or maintenance;
  • Damage caused by non-material or technology reasons, such as the damage caused by improper usage;
  • Damage caused by changes in the appearance and surface of the product, and such damage does not affect the function of the product;
  • Damage caused by repair or installation by the non-designated repair center or dealer by Truckrun Motor;
    Truckrun Motor has the right to choose repair or replacement, and Truckrun Motor’ s responsibility is limited to repair or replacement of the products. When vehicle manufacturers or dealers encounter quality problems in using or selling Truckrun Motor products, you can report the order number and product serial number of the purchase order to Truckrun after-sales Service Department. Truckrun Motor will provide free maintenance or replacement of the products that are confirmed by Truckrun Motor after-sales service Department to meet the warranty scope. Please refer to “Warranty Period and Scope” for details. If you require repair services out of the warranty period, the motor will be charged for parts, labor and transportation fee.

Please contact the vehicle manufacturer or dealer directly if you need to repair the parts of Truckrun motor which install on the vehicle. In case of any conflict between this warranty statement and the current laws of China, the laws shall prevail. Truckrun Motor reserves the right to amend the above terms without prior notice.
Wuxi Truckrun Motor Co.,Lt

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>