SMARTSAFE TTM113 Tire Tread Depth Examiner User Manual

SMARTSAFE TTM113 Tire Tread Depth Examiner

Copyright Information
Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SMARTSAFE.
Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of an accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to comply with SMARTSAFE operating and maintenance instructions strictly. SMARTSAFE shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original SMARTSAFE Products or SMARTSAFE Approved Products by SMARTSAFE.
All information, specifications and illustrations in this manual are based on the latest information available when printing. SMART SAFE reserves the right to make changes without prior written or oral notice.

Trademark Information

is a registered trademark of SHENZHEN SMARTSAFE TECH CO., LTD. in China and other countries. All other SMARTSAFE trademarks, service marks, domain names, logos, and company names referred to in this manual are either trademarks, registered trademarks, service marks, domain names, logos, or company names of SMARTSAFE or are otherwise the property of SMARTSAFE or its affiliates. In countries where any of the SMARTSAFE trademarks, service marks, domain names, logos, and company names are not registered, SMARTSAFE claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademark, service mark, domain name, logo, or company name of SMARTSAFE or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact SMARTSAFE by visiting the website at www.newsmartsafe.com or writing to SHENZHEN SMARTSAFE TECH CO., LTD., 3310, Building 11, Tianan Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual.

Safety Warnings
Please read all safety warnings and operating information carefully. To avoid personal injury, property loss or accidental damage to the product caused by improper operation, please pay attention to the following points when using this product:

• Always conduct vehicle detection in a safe environment.
• Never operate the detection device while driving a vehicle to avoid distraction and thus cause a car accident.
• Before starting the engine, the handbrake should be pulled, especially the front wheel should be protected, and the gear shift lever should be placed in Neutral (manual transmission) or P gear (automatic transmission), so as to avoid starting the engine and causing the vehicle to rush out and hurt people.
• The exhaust gas from the engine contains a variety of toxic compounds (such as hydrocarbons, carbon monoxide, nitrogen oxides, etc.), which can cause slow reactions and even serious personal injury or death. The vehicle under test should be parked in a well-ventilated place during operation.
• Use extreme caution when working around ignition coils, distributor caps, ignition lines, and ignition plugs. These components generate dangerous voltages when the engine is running.
• Do not look directly at the laser beam of the device, and it is recommended to wear ANSI-compliant goggles.
• Keep safety tips and warning labels on the device clean and legible.
• Keep the detection device dry and clean, away from gasoline, water, and grease. If necessary, clean the surface of the device with a clean cloth coated with a mild detergent.
• Use only authorized and qualified parts for device repair and maintenance.
• All internal maintenance of the detection device must be carried out by an authorized maintenance organization or authorized technicians. Attempts to disassemble or modify the device will void the warranty.
• The safety information described herein covers all situations of which our company is aware. We cannot know, predict, or recommend all possible hazards. The operator must ensure that the maintenance operation performed under any circumstances will not cause harm to personal safety.

Packing List

The product configuration is different for different markets. For details, please consult the local dealer or check the packing list distributed with the unit.

No.

| Accessory name|

Picture for Reference

|

Quantity

---|---|---|---

1

|

Main unit

| |

1

2

| USB cable (Type-C)| |

1

3

|

Calibration platform

| |

1

4| User manual| –| 1

Product Introduction

Overview
TTM113 tire tread depth examiner is a device developed by SmartSafe for vehicle tire tread detection and wear analysis. The device can scan multiple grooves at a time to accurately and quickly detect tire wear. The tool can be used alone or in conjunction with the detection device to view and print detailed tire tread detection reports.
Warning: This tool is a Class II laser product. Avoid direct eye exposure to the laser. Failure to follow the warning may result in serious injury.

TTM113 Main Unit

1. Magnetic head
2. Touch screen
3. Power button/measurement button
4. Type-C charging port
5. Battery compartment
6. Laser window
7. Camera window
8. Handle

Technical Parameters

4

| Wireless communication| Wi-Fi (support 2.4GHz)
---|---|---
Bluetooth
5| Charging/data interface| Type-C
6| Camera| 2 million pixels, 30fps
7| Battery| 3.7V, 3,000mAh
8| Operating temperature| 0 – 45°C
**| Storage temperature| -20 – 60°C
10**| Size| 70×97×225 mm

First Use

Charge
Plug the charging cable into the Type-C port of the main unit to charge it. The battery identification on the main unit screen displays, indicating that it is charging; the battery identification on the main unit screen displays, indicating that charging is complete.

Startup
Press and hold the power button on the device until the screen lights up, the device enters the startup screen and then enters the warning page.
Click Enter to go to the main interface.
Note: Check the box before No more tips and click Enter. You can skip the prompt page and enter the main interface directly after the next startup.

Shutdown
Press and hold the power button on the device until a shutdown prompt dialog box pops up on the screen. Click Shutdown to turn off the device or click Restart to restart the device.

Main Interface
The main interface of the TTM113 main unit mainly includes the following function modules:

restoration, and device calibration.

Tread Detection

• Click Tread Detection on the main interface to enter the following prompt interface.

• Read the detection method prompted on the screen and click Enter to go to the tire tread detection interface.
  Note: Check the box before No More Tips and click Enter to skip the prompt page and directly enter the detection interface the next time you click Tread Detection.

• The system starts the detection from the left front wheel of the vehicle by default, but you can also manually select any tire for detection. After clicking on the tire icon, attach the magnetic head of the device to the tread of the corresponding tire, and press the measurement button on the device to start the detection. At this time, a scanning animation is displayed on the icon corresponding to the current tire, and a green laser is emitted in the laser window of the device.
  Note : The system defaults to 4-wheel detection mode. If you need to switch to the 6-wheel detection mode, you can click Check Settings on the main interface and modify the quantity of tires.

• After completing the current tire detection, the scanning cursor automatically jumps to the next tire icon in a counterclockwise direction. After all tire tests are completed in turn, the tire icon will identify the tire detection results in different colors.
  Icon Color| Description
  ---|---
  Gray| Indicates a tire that has not been detected.

Green

| Indicates that the detected tire wear degree is within the normal range, and its groove depth is greater than or equal to the safe value.

Yellow

| Indicates that the detected tire wear degree is within the warning range, and the groove depth is greater than the safe value but less than the normal value, it is recommended to replace the tire.
---|---

Red

| Indicates that the detected tire is seriously worn the groove depth is less than or equal to the dangerous value, and the tire needs to be replaced immediately.
Groove depth value| Displays the minimum groove depth of this tire.

• If the detection fails, the following pop-up window will pop up on the screen. Please confirm that the magnetic head of the device fits the tread of the tire and press the measurement button again to measure again
  Display item| Description
  ---|---

Tire Tread Data

| Display the tire tread data for each tire, including each groove depth data. Green indicates normal depth, yellow indicates warning depth, and red indicates dangerous

depth.

Braking

Distance

| Predict the braking distance of the detected vehicle

under limited road conditions and vehicle speeds and

wheels.

Maintenance & Repair Recommendation

ions

| Based on the current vehicle detection data, a maintenance proposal will be given on whether tires need  to  be  replaced  and  four-wheel  alignment

performed.

• After all tires are detected, swipe the screen to the left to view the current detection report.

Check Settings
Click Check Settings on the main interface to enter the following interface:

according to the tire quantity of the vehicle to be detected, and click on the corresponding value.
Unit| Switch the display unit of test results to the metric system or imperial system as required.
---|---
Parameter Settings| Set safe and dangerous values as needed.

System Settings
Click Settings on the main interface to enter the following interface. Swipe up the screen to view more setting items.

Network Connection
This item is used to set the wireless network connection of the device.
Please follow the steps below to set it up:

1. Click Network Connection on the system settings interface, then click or slide the WLAN switch to turn it on, and the device will start automatically scanning available wireless networks.
2. Select the network you want to connect to:
   • If you select an open network, you can directly connect to it.
   • If you select an encrypted network, you will need to enter an access password before you can connect.
3. When the network name you are trying to connect to appears in red and a “√” appears after it, it means the connection is successful.

Bluetooth
It is used to set up Bluetooth communication connections. Click Bluetooth on the system settings interface, then turn on the Bluetooth switch, and the detector can be paired with other detection devices for data transmission.

Calibration
It is used to perform device calibration.

1. Click Calibration on the system settings interface, and follow the onscreen prompts to correctly place the detector on the Calibration platform so that the magnetic head of the detector fits the magnetic area on the Calibration platform.
2. Press the measurement button on the device to start calibration.
3. After calibration is completed, click Confirm to return to the main system settings interface.

Brightness Adjustment
It is used to adjust screen brightness.

Update
It is used for application and system upgrades.

Sleep Mode
It is used to set the waiting time for the system to start sleep mode.

Automatic Shutdown
It is used to set the waiting time for the device to automatically shut down when there is no operation.

Language Settings
It is used to switch system language.

Restore to Factory Settings
It is used to initialize the device. Restoring the device to factory settings will delete all personal data, please proceed with caution.

About
It is used to view the device model, system version and application version.

Data Query
This function module is used to view and share detection reports. Click Data Query on the main interface to view the latest detection report.

• Swipe up the screen to the bottom, click the Share button to generate a QR code, and scan the QR code to share the detection report.

Warranty

• This WARRANTY applies only to customers and dealers who have purchased SmartSafe products through normal procedures.
• Within one year from the date of delivery, SmartSafe Company shall guarantee the defects of its electronic products caused by materials or processes.
• Damage of the equipment or components caused by abuse, unauthorized modification, use for purposes other than the design of the product, or failure to operate in the way specified in the instruction shall not be covered by this warranty.

Disclaimer
The warranty mentioned above may supersede any other warranty.
Order notification
The replaceable parts and optional parts can be ordered directly from the dealers authorized by SmartSafe. Please specify when ordering:

• Quantity ordered
• Part number
• Part name

Statement: The Company reserves the right to change the product design and specifications without prior notice. The appearance and color of the object may be different from that shown in the instruction manual. The object shall prevail. We have tried our best to make all the descriptions in the book accurate, but there are still some inaccuracies. If you have any doubt, please contact the distributor or after-sales service center. The company will not assume any consequences caused by misunderstanding.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in 0mm exposure condition, compliance with exposure requirements.

Customer Service Center

If the equipment needs to be repaired, please send the equipment to SmartSafe, together with the purchase invoice and problem description. If the equipment is within the scope of the warranty, SmartSafe offer free maintenance; If the equipment is outside the scope of the warranty, SmartSafe will charge for maintenance and return freight.
Address of SmartSafe Company

• 3F Building B, Qiao’an Technology lndustrial Park, Guanlan, Longhua New District, Shenzhen,
• Guangdong, China. Postcode: 518110
• www.newsmartsafe.com.

References

• ADAS Calibrations, Wheel Alignment Tools, Car Diagnostic Tools, Injector Cleaning - SmartSafe 易检车服

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>