ASI 9017-9 Vertical Baby Changing Stations Instruction Manual
- September 3, 2024
- ASI
Table of Contents
ASI 9017-9 Vertical Baby Changing Stations
Specifications
- Dimensions: Closed: 28-1/4 x 39-5/32 x 3-5/16 [718 x 995 x 100]
- Open: 28-1/4 x 39-5/32 x 32-3/8 [718 x 995 x 822]
- Construction: Type 304 Stainless Steel – Satin Finish
- FDA-approved fungus and bacteria-resistant plastic bed
- Mounting Capacity:
Product Overview
The Baby Changing Station model #9017-9 by American Specialties, Inc. is
designed for easy installation and maintenance.
Installation Instructions
- Locate wall studs at 16 [406] OC for fastening the station.
- If two wall studs cannot be used, use two screws into ONE stud or toggle fasteners securely in the wall.
- Attach unit to wall studs using appropriate screws or bolts as described.
FAQ
Q: How do I clean the changing station?
A: Use a mild soap solution and a soft cloth to clean the station. Avoid
abrasive cleaners that may damage the surface.
Model #9017-9
Technical Data Sheet
BABY CHANGING STATION, VERTICAL – STAINLESS STEEL, SURFACE MOUNTED
PRODUCT OVERVIEW
This vertical station has a door facing and collar made from 20 gauge 304 stainless steel. Fabricated of FDA-approved fungus and bacteria-resistant plastic. Unit supports an infant up to 3 ½ years old and a weight up to 50 lbs (23 kg). Surface mounted with stainless steel collar. Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use. Unit is operable with less than 5lb of force (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners. Safety strap is easily adjustable by user for baby size and the Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent. Liners/towels are easily replenished by service personnel as required.
KEY FEATURES & SPECIFICATIONS
- ASTM F-2285 & F-2388, G-21, G-22, ANSI Z535, ANSI 117.1, EN 1222-1, and EN 1221-2 (Including A1:2013) compliant. Damped gas spring aids one handed operation using less than 5lbs force (22.2N) – no tight grasping, pinching or twisting of the wrist.
- Vertical space-saver changing station is ideal for mounting in smaller spaces.
- Includes one integral bag hook and bed-liner dispenser (convertible to a multi-fold towel dispenser)
- Door facing and flange dress trim are made of 20 gauge Type 304 Stainless Steel – Satin Finish.
- Changing Surface is fabricated of FDA-approved fungus and bacteria-resistant HDPE.
- Surface Mounted with stainless steel collar. Designed to support an infant up to 3 ½ years old and a weight up to 50 lbs (23 kg)
- The bed is designed to cradle a child’s body. An adjustable two-part, vinyl-coated safety strap with a Sure-Lock latch aids in safety.
Operation & M aintenance
Unit platform is shaped to keep a child restrained from rolling out of the
bed. Unit is easily opened and closed by user with one hand in any location
and handle cavity is provided on door face for preferred use. Unit is operable
with less than 5 lbs (22.2N) while not requiring any tight grasping, pinching
or twisting of the wrist. Bed liner/towel dispenser presents liners or towels
for user hygiene and convenience. Dispenser lid is provided for sanitary
protection and ease of loading of wipes or liners. Safety strap is easily
adjustable by user for baby size and the Sure-Lock latch securely resists
opening until released by opposing finger pressure by adult caretaker/parent.
Liners/towels are easily replenished by service personnel as required.
technical information **/ P roduct Properties
Property| Value**
Dimensions| Closed: 28-1/4″ x 39-5/32″ x 3-5/16″ [718 x 995 x 100] Open:
28-1/4″ x 39-5/32″ x 32-3/8″ [718 x 995 x 822]
Construction| Type 304 Stainless Steel – Satin Finish
FDA-approved fungus and bacteria-resistant plastic bed
Mounting| Surface Mounted
Capacity| Supports an infant up to 3 ½ years old and a weight up to 50 lbs (23
kg)
i nstallation
Installation instructions along with operation and maintenance manual are
provided with each unit. Surface mount unit using hardware supplied through
recessed mounting holes. Hardware kit supplied has fasteners suitable for
metal or wood stud walls in dry locations and general hollow wall construction
where adequate substrate strength is obtained. Fasteners and anchors for
masonry walls are not provided. Wall reinforcement must be suitable to sustain
the transfer of maximum unit loading. Mounting hole plug covers are supplied
to conceal fasteners after installation. Follow procedure in instructions
provided and as summarized here:
- Locate wall studs at 16″ [406] OC for fastening the station. If two (2) wall studs cannot be used, use two (2) screws into ONE stud and drill pilot holes and install toggle fasteners securely in the wall at the non-stud location.
- Attach unit to wall studs with four (4) 1/4″ x 3″ long Phillips pan head self-threading screws through flat washers.
- Where wall studs are not available attach with four (4) 1/4″ – 20 x 3″ pan head bolts with flat washers into toggles or expansion nuts.
w arranty
Five (5) Years from date of Invoice
American Specialties, Inc. | 441 Saw Mill River Road, Yonkers, NY 10701 | 914-476-9000 | www.americanspecialties.com
- Model:
- CSI:
-
9017-9
- 10 28 13 Toilet Accessories
- Issued: 11/1/2021 Revised: 2/8/2024
Manufacturer reserves the right to make changes to the design, dimensions or functionality of the product without formal notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>