HD Ridez WB-CD295BD Running Boards Installation Guide
- June 1, 2024
- HD Ridez
Table of Contents
HD Ridez WB-CD295BD Running Boards
Product Information
Specifications
- Fits: 19-24 Chevy Silverado/GMC Sierra 1500 Double Cab
- Includes: Diesel models with DEF tanks, 2022 Silverado 1500 LTD, and 2022 Sierra 1500 Limited
- Part Number: WB-CD295BD
Product Usage Instructions
Parts List
- 1 Driver/Left DS4 Running Board
- 1 Passenger/Right DS4 Running Board
- 32 10mm x 20mm OD x 2mm Flat Washers
- 16 10mm Nylon Lock Nuts
- 16 8mm x 30mm Hex Bolts
- 16 8mm Lock Washers
- 16 10mm x 30mm Hex Bolts
- 16 8mm x 24mm OD x 2mm Flat Washers
- 4 Driver/Left Mounting Brackets
- 4 Passenger/Right Mounting Brackets
Installation Instructions
- Remove contents from the box and verify all parts are present.
- Select the Passenger/Right Mounting Bracket and attach it to the factory threaded holes using specified hardware.
- Repeat step 2 for the remaining mounting locations.
- Attach the Passenger/Right DS4 Running Board to the Mounting Brackets with the provided hardware.
- Level and adjust the Running Board before fully tightening all hardware.
- Repeat steps 1-5 for the Driver/Left DS4 Running Board.
- Periodically inspect the installation to ensure all hardware is secure and tight.
Cleaning Instructions
To protect your investment, avoid using polish or wax-containing abrasives. Mild soap can be used to clean the running boards.
FAQ
Q: Can I install these running boards on a different vehicle model?
A: These running boards are specifically designed for 19-24 Chevy Silverado/GMC Sierra 1500 Double Cab and 20-24 Chevy/GMC Silverado/Sierra 2500/3500 Double Cab models.
Q: How should I maintain the running boards?
A: Avoid using abrasive polish or wax. Clean them with mild soap for maintenance.
INSTALLATION INSTRUCTIONS
DS4 RUNNING BOARDS 19-24 CHEVY SILVERADO/GMC SIERRA 1500 DOUBLE CAB (EXCL. 19-21 SILVERADO 1500 LD & 19-21 SIERRA 1500 LIMITED) (INCL. DIESEL MODELS WITH DEF TANKS, 2022 SILVERADO 1500 LTD AND 2022 SIERRA 1500 LIMITED), 20-24 CHEVY/GMC SILVERADO/SIERRA 2500/3500 DOUBLE CAB (INCL. DIESEL MODELS WITH DEF TANKS) PART#WB-CD295BD DS4 RUNNING BOARDS 19-24 CHEVY SILVERADO/GMC SIERRA 1500 DOUBLE CAB (EXCL. 19-21 SILVERADO 1500 LD & 19-21 SIERRA 1500 LIMITED) (INCL. DIESEL MODELS WITH DEF TANKS, 2022 SILVERADO 1500 LTD AND 2022 SIERRA 1500 LIMITED), 20-24 CHEVY/GMC SILVERADO/SIERRA 2500/3500 DOUBLE CAB (INCL. DIESEL MODELS WITH DEF TANKS)
PARTS LIST
| 1 | Driver/Left DS4 Running Board | 32 | 10mm x 20mm OD x 2mm Flat Washers |
|---|---|---|---|
| 1 | Passenger/Right DS4 Running Board | 16 | 10mm Nylon Lock Nuts |
| 4 | Driver/Left Mounting Brackets | 16 | 8mm x 30mm Hex Bolts |
| 4 | Passenger/Right Mounting Brackets | 16 | 8mm Lock Washers |
| 16 | 10mm x 30mm Hex Bolts | 16 | 8mm x 24mm OD x 2mm Flat Washers |
PROCEDURE: REMOVE CONTENTS FROM THE BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.
- Start the installation under the Passenger/Right side of the vehicle. Locate the 4 plugs along the bottom edge of the body. Mounting Brackets will attach to all threaded mounting holes, (Figure 1). Remove the plastic plugs from each mounting location. Directly above each threaded hole is a top mounting location on the side of the body panel. Hold a Bracket up in place to help determine the mounting holes to use along the body.
- NOTE: Thread an 8mm Hex Bolt into the threaded holes to clear paint as required.
- Select (1) Passenger/Right Mounting Bracket. Attach the Mounting Bracket to the factory threaded holes with (2) 8mm Hex Bolts, (2) 8mm Lock Washers, and (2) 8mm Flat Washers, (Figure 2). Do not tighten the hardware.
- Move along the body to the next mounting location. Repeat Steps 1 & 2 to attach the remaining (3) Passenger/Right Mounting Brackets to the (3) remaining locations.
- Select the Passenger/Right DS4 Running Board. Attach the Running Board to the rear faces of the Mounting Brackets with (8) 10mm Hex Nuts, (16) 10mm Flat Washers, and (8) 10mm Nylon Lock Nuts,(Figure 3). Do not tighten the hardware.
- Level and adjust the DS4 Running Board and fully tighten all hardware.
- Repeat Steps 1—5 to attach the Driver/Left DS4 Running Board.
- Do periodic inspections of the installation to make sure that all hardware is secure and tight.
- To protect your investment, Do not use any type of polish or wax that may contain abrasives that could damage the finish.
- Mild soap may be used also to clean Running Boards.
Passenger/Right side Installation Pictured
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>