LIPOWER MARS-2000 Portable Power Station User Manual

MARS-2000 Portable Power Station
User Manual

PACKING LIST

Missing Parts? Contact us at support@lipowershop.com for a replacement.

Product Inspection

• Please kindly check if the one you get is the same as the one you ordered.
• Please kindly check the product first to see if there is damage or cracks.
• Please kindly test the power station to see if it can input or output well.
  *Note: Charge first- before using your new MARS-2000, plug it into a suitable power outlet until it is fully charged.

INPUT & OUTPUT PORTS

Total Ports Power-HI: 2000W
Power-HI when using each port alone:
Charge Input:
DC 5521: 200W Max
Anderson: 200W Max (solar)
TYPE-C: PD 60W
DC Output:
Cigarette Output: 96W
Max DC Output: 96W Max
USB Output:
USB A: 12W Max
USB QC 3.0: 18W Max 2
TYPE-C: PD 60W
AC Output:
Each of them: 2000W rated, 4000W peak.

SPECIFICATIONS

HOW TO RECHARGE MARS-2000

Recharge Time How to Charge MARS-2000 with APOLLO 100 Solar Panel
MARS-2000 & APOLLO 100*1
DC input: Find the DC-DC cable on the back of APOLLO 100; Connect APOLLO 100 with the DC input of MARS-2000.

Anderson input: Find the Anderson-DC(female) cable and DC-DC cable on the back of APOLLO 100, and connect them together to bridge APOLLO 100 and the Anderson input of MARS-2000.
MARS-2000 & APOLLO 100112
Step 1. Find the DC-DC cable and DC(female)-Anderson cable on each back of APOLLO 100, and connect them together.
Step 2. Connect two of the APOLLO 100 with the Y parallel cable (2Anderson interface-1Anderson interface).
Step 3. Connect the Anderson joint interface to the Anderson input of MARS-2000.
*MARS-2000 & APOLLO 1002**
You will need 5 cables (included in the package):

HOW TO USE MARS-2000

Power Button
– single press to turn on the LCD screen
– long press 3 seconds to turn off all outputs and LCD screen
AC AC Button
– long press 2 seconds to start using AC Output
– fast press 5 times to transform between 50Hz and 60Hz
**USB** USB Button
– single press to start using USB and Type-C ports
– single press to turn off all USB ports
**DC** DC Button
– single press to start using DC and Car ports
– single press to turn off all DC ports 

LCD Screen

The icon will light up when Circuit Frequency is switched manually.

• fast press 5 times to transform between 50Hz and 60Hz.
  It will light up when the temperature of MARS-2000 is over 60°C(140°F) or below -10°C(14°F), please turn off the AC output.
  The icon will light up when the power station is faulty and will show the corresponding error code. *(Please kindly refer to the next page for details)

power station.
| Troubleshooting: Please plug out the devices firstly, and press the button to recover the function.
05| AC overload protection.
| Explain the loading power of the electrical applications over 2000W.
| Troubleshooting: Press the AC button 3s to recover the function. Choose our models >2000W to fit your devices.
06| AC inverter over temperature protection.
| Explain: The inverter will automatically cut off the output if the temperatures are over 80C(176F)
07| Battery over temperature protection when discharging.
| Explain: The output will be cut off when the battery temperature is over 60 C (140 F).
| Troubleshooting: Press the AC button 3s to eliminate it. let the power station stay for a period of time until the temperature is down.
08| Battery low-temperature protection when discharging.
| Explain: The output will be cut off when the battery temperature is over
-10 C ( 14:F ).
09| Battery low voltage protection.
10| Battery over-voltage protection.
11| Charge input over-voltage protection.
12| Battery low-temperature protection when charging.
13| Battery over temperature protection when charging.

CHARGING TIME FOR YOUR APPLIANCES

Formula:
Note: Please kindly check if there is an Instant start power of your device, a starting power may use 3 times the amount of standard operating power to run the application, MARS-2000 won’t run those starting power beyond 2000W.

FAQ

Q1. What kind of devices will MARS-2000 power?
A: MARS-2000 will power a device that operates under 2000W.
Q2. Does MARS-2000 support pass-through charges?
A: Yes, but we don’t recommend, it since it will cause damage to battery life.
Q3. Why is the AC not working?
A:0 please kindly check if you have turned on the AC ports, long press the AC button for 2 seconds to turn on the AC ports. 0 please kindly check if your device is under 2000W. 0 Contact us at support@lipowershop.com for a replacement.
Q4. Can the MARS-2000 be used as UP S?
A: No, each part of the output is manually controlled to turn on/ off separately.
Q5. What kind of solar panel should I use to power MARS-2000?
A: POWER APOLLO 100 solar panel*2 makes the best match.
Q6. Can I use 3 or 4 POWER APOLLO 100 solar panels to faster charge MARS-2 000?
A: No, the max power of solar charge input is 200W, 2100W solar panel will work.
Q7. Why does the AC adapter get hot when working?
A: The AC charging adapter generates heat while it is working, the normal temperature of the AC adapter is under 176°F.
Q8. Is the built-in battery replaceable?
A: No, please don’t disassemble MARS-2000 and replace the battery, it will damage the unit.
Q9. How to protect the battery?
A: ®Please recharge MARS-2000 every 3 months if you don’t use it. Please recharge MARS-2000 when the power drops below 15%.

Product Application Skills

1.  This product is built in high-quality original LiFePO4, it has no memory effect but high capacity, and it is durable. However, we still recommend you apply in the range of 50 F-86 F, so as to obtain the optimal charging capacity.
2. When charging, in order to avoid interference, please stay away from TV, radio, and other equipment.
3. If the device has not been used for a long time, please disconnect the cable and store it.
4. Some portable devices may need to be set in charge mode to charge, see the core-spending equipment user manual for more information.
5. After starting if there is no output, it displays to automatically shut down within 20 seconds, so as to achieve a better energy-saving effect.

ATTENTION

1. To avoid short-circuiting, keep the unit away from all metal objects (e.g. coins, hair -pins, keys, etc).
2. Do not heat the unit, or dispose of it in fire, water or other liquids. Keep away from high temperatures. Do not expose the unit to direct sunlight.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. The unit may become hot when charging, this is normal. Do not cover the device with towels, clothing, and another item.
6. Please deal with scrap products in accordance with the regulations, and do not treat the built-in battery as household garbage, so as not to cause explosion and pollution.
7. The product is only used for emergency power stations, it can not replace the standard DC or AC power of household appliances or digital products.
8. Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device.

WARRANTY AND SUPPORT

Limited Warranty LIPOWER warrants to the original consumer that LIPOWER products will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified n the ‘Warranty Period’ section below, subject to the exclusions set forth below. This warranty statement sets forth LIPOWER’s total and exclusive warranty obligation.LIPOWER does not authorize any person or third- party to sell our products for us or assume any other responsibility in connection with them.
Warranty Period
The warranty period for LIPOWER power products is 24 months. In each case, the warranty period is measured starting on the date of purchase by the original. The sales receipt from the first consumer purchase, or other reasonable documentary proof is required in order to establish the start date of the warranty period.
Remedy
LIPOWER will replace (at LIPOWER’s expense) any LIPOWER products that fail to operate during the applicable warranty period due to defects in workmanship or material. A replacement product assumes the remaining warranty of the original product.
Limited to Original Consumer
The warranty on LIPOWER’s product is limited to the original consumer and is not transferable to any subsequent owner.

Exclusions
LIPOWER’s warranty does not apply to:

• Any product that is misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in LIPOWER’s current product literature.
• Any product purchased through an online auction house.
• Attempted repair by anyone other than an authorized facility.
• LIPOWER’s warranty does not apply to the battery cell unless the battery cell is fully charged by you within seven days after you purchase the product and at least once every 3 – 4 months thereafter.

CUSTOMER SERVICE

Unhappy ?

How to Register the Item and Get the Warranty?

1. Go to lipowershop.com: https:/Mipowershop.com
2. Click the”Support”, and then choose”Register Product”
3. Fill in the information form, and then submit
4. You will get a 24-month warranty in total when you finished

Customer Support: support@lipowershop.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>