SHEN ZHEN GTL TECHNOLOGY CO LTD CW390 3 In 1 Magnetic Wireless Charger User Manual
- June 1, 2024
- SHEN ZHEN GTL TECHNOLOGY CO LTD
Table of Contents
SHEN ZHEN GTL TECHNOLOGY CO LTD CW390 3 In 1 Magnetic Wireless Charger
Please use the Type C port Adapter.
Charging with Cases
Introduction
- Magnetic Wireless charging area for Mobile phone
- Wireless charging area for Bluetooth headset.
- Wireless charging area for iWatch.
- Operating indicator.
- TYPE-C Female.
Operation Instructions
-
Charging the mobile phone: Put the mobile phone upright in the magnetic wireless charging area of mobile phone, and you can see the“ Charging indicator” on the display of the mobile phone, showing that it is being charged properly.
Remark: Only for Apple magsafe and cases with magnets. Charging the iWatch: Put the iWatch on the wireless -
charging area of iWatch, and align with the magnets; the“ Charging indicator” on the iWatch will light up, indicating that it is being charged properly.
-
Charging for Airpod: Put the headset flat on the wireless charger area and see that the charging indicator of the Bluetooth headset lights up, indicating normal charging.
-
This product needs to be powered by an adapter with a power of 9V 2A and connected to the type-c port. When the bottom power indicator is on, it means that the power supply is connected.
-
Operating indicator: The blue indicator lights up when charging or full, and turns off when not charging Indicator light flashes during charging fault.
Specifications
Name
| 3 in 1 Magnetic Wireless Charger| Model| CW390
---|---|---|---
Product size
| 158.9· * 99.8″‘ 132.6 (mm)| Power Supply Port|
Type C
Input| 9V=2A| Output Power|
18W(MAX)
Matters needing attention
- Only for Apple magsafe and cases with magnets.
- Do not put metal foreign objects in the charging area.
- When charging earphone, please place the device at the center of the charg!ing area.
- Please remove the protective case to charge when charging the Earphone .
Compatibility:
Smart Phone
[For Apple] iPhone 12 mini , iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max,
iPhone 13 mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, i Phone 14,
iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone 15, iPhone 15 Pro,
iPhone 15 Pro Max, iPhone 15 Plus.
Smart Watch
iWatch 3/4/5/6/SE/7/ 8/9,/Ultra 1/Ultra 2.
Earbuds
AirPods 2/3/Pro 1/Pro 2.
Remark: The A1602/A2897 charging; cases do not support wireless charging,
please check whether the headset charging, bay supp, orts wireless charging
function before using ii.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radiofrequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.