dji Zenmuse P1 Gimbal Camera User Guide

dji Zenmuse P1 Gimbal Camera

Specifications:

• 45MP full-frame sensor
• Global mechanical shutter
• Interchangeable fixed-focus DJI DL Lens
• 3-axis stabilized gimbal

Product Usage Instructions

• Disclaimer and Warning:
  The Zenmuse P1 has been calibrated for the designated camera and lens before leaving the factory. Do not modify or alter the gimbal and camera. Avoid disassembling the gimbal or camera to prevent permanent damage.

• Compatible Aircraft:
  Only use the P1 with specified compatible DJI aircraft. Check the Zenmuse P1 User Manual for the latest information on compatible aircraft. Download the latest DJI Pilot 2 App and update to the latest aircraft firmware for optimal performance.

• Safe Use:
  Operate your aircraft safely by following user manual procedures and online tutorials. Respect the AMA Model Aircraft Safety Code. Use the product in accordance with all applicable laws and regulations.

FAQ :

1. Q: Can I add additional components like filters or lens hoods to the camera?
   A: No, it is not recommended to add any other component or device to the camera as it may affect its performance and cause damage.

2. Q: What lens is included with the Zenmuse P1?
   A: The Zenmuse P1 comes with the DJI DL 35mm F2.8 LS ASPH Lens. Contact local dealers for information on purchasing other compatible lenses.

Disclaimer and Warning

• Congratulations on purchasing your new DJITM product. The information in this document affects your safety and your legal rights and responsibilities. Carefully read this entire document and all safe and lawful practices provided by DJI. Visit the DJI official website (http://www.dji.com) to download the full version of the user manual and carefully read all instructions and warnings therein before assembling, setting up, and using this product. Failure to read and follow instructions and warnings in the above documents or a lack of strong awareness of safety during the operation may result in serious injury to yourself or others, or damage to your DJI product or damage to other objects. This document and all other collateral documents are subject to change at the sole discretion of SZ DJI Technology Co., Ltd. (DJI). They may be updated, changed, or terminated without prior notification. For up-to-date product information, visit http://www.dji.com and click on the product page for this product.
• DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies.
• Do Not Modify or Alter the Gimbal and Camera
• The ZENMUSETM P1 has been calibrated specifically for the designated camera and lens before leaving the factory. No physical or mechanical modification or adjustment of the gimbal is required or recommended. Do not add any other component or device to the camera such as a filter or lens hood.
• The P1 is a delicate instrument. Do not disassemble the gimbal or camera as this will cause permanent damage.
• Only Use Compatible Aircraft
• Only use the P1 with specified compatible DJI aircraft. The P1 will be compatible with more aircraft in the future. Check the Zenmuse P1 User Manual for the latest information on compatible aircraft. To optimize the performance of the gimbal, download the latest DJI Pilot 2 App and update to the latest aircraft firmware. Otherwise, the P1 may not function properly.

Safe Use

• Make sure to operate your aircraft in the safest manner possible. Observe the procedures contained in the user manual and the online tutorials to mount and connect the gimbal to your aircraft. Respect the AMA Model Aircraft Safety Code.
• By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof.
• You agree to only use this product for purposes that are proper and in accordance with all applicable laws, rules, and regulations, including international and domestic airspace regulations, and all terms, precautions, practices, policies, and guidelines DJI has made and may make available.
  DJI accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in the user manual.

In the Box

Introduction
The Zenmuse P1 integrates a 45MP full-frame sensor, a global mechanical shutter, and an interchangeable fixed-focus DJI DL Lens on a 3-axis stabilized gimbal. Designed to be used with compatible DJI aircraft and DJI TERRATM for photogrammetry flight missions, the P1 takes efficiency and accuracy to a whole new level.

Overview

1. Gimbal Connector
2. Pan Motor
3. Roll Motor
4. Lens Release Button*
5. Tilt Motor
6. Lens Mounting Index
7. Lens Mount
8. Lens Mounting Index
9. Lens**
10. Lens Hood Mounting Index
11. Balancing Ring
12. Lens Hood
13. Lens Cap

• DO NOT press the lens release button while attaching the lens.
• The DJI DL 35mm F2.8 LS ASPH Lens is included with the Zenmuse P1. Contact local dealers for more  information on how to purchase other compatible lenses. Refer to Specifications to check supported lens models.

Installation

1. Remove the gimbal cap.
2. Press the button on the aircraft used for detaching the gimbal and camera. Rotate the gimbal cap on the aircraft to remove.
3. Align the white dot on the gimbal with the red dot on the aircraft and insert the gimbal.
4. Rotate the gimbal lock to the locked position by aligning the red dots.

• Make sure the gimbal connector on the aircraft is positioned correctly when mounting. Otherwise, the camera cannot be mounted.
• Remove the L1 by pressing the button on the aircraft used for detaching the gimbal and camera.
• Put the P1 with the lens attached in the storage box. It is not recommended to repeatedly disassemble and assemble the lens.
• Only remove the P1 after powering off the aircraft.
• Detach the gimbal from the aircraft during transportation or storage. Otherwise, the service life of the damper balls may be shortened or they may even be damaged.
• Before takeoff, make sure that the SD card cover is closed properly. Otherwise, it may obstruct the gimbal arm from moving and cause the motor to overload.

Camera Controls

Remote Controller
The MATRICETM 300 RTK remote controller is used as an example below. Adjust the tilt of the gimbal using the left dial and adjust the pan using the right dial. Press the shutter button or record button to take photos or record video. Toggle the 5D button to adjust the EV value. The customizable C1 button can be used to recenter the gimbal and the customizable C2 button can be used to switch between the main and auxiliary screen.

1. Left Dial
2. Record Button
3. Shutter Button
4. Right Dial
5. 5D Button
6. Customizable C2 Button
7. Customizable C1 Button
   The function of this button can be customized.

DJI Pilot 2 App
The touch interface can be used for capturing photos, recording videos, and viewing playback. Professional photography configurations are also available.

The software interface may need to be updated. Make sure to update to the latest version.

1. Live HD Video
2. Camera Parameters
3. Auto Exposure Lock
4. Focus Mode
5.  Storage Mode
6. Switch to Auto/Manual Exposure
7. Parameter Settings
8. Recording Mode (Shutter/Video Record)
9. Shooting Button (Shutter/Video Record)
10. Playback
11. Manual Focus (MF) Slider

Specifications

1. Absolute accuracy measured with an aircraft with a GSD of 3 cm and flight speed of 15 m/s, with a 75% front overlap rate and a 55% side overlap rate.
2. Aperture value no larger than f/5.6. The camera will automatically switch to the electronic shutter when the shutter speed is larger than 1/10 s.
3. Only 35mm lens supported

• This content is subject to change.
• Download the latest version from
  • http://www.dji.com/zenmuse-p1
• DJI is a trademark of DJI.
• Copyright © 2022 DJI All Rights Reserved.

FCC Compliance Notice

• Supplier’s Declaration of Conformity
• Product name: ZENMUSE P1
• Model Number : ZP1
• Responsible Party: DJI Technology, Inc.
• Responsible Party Address : 201 S. Victory Blvd., Burbank, CA 91502
• Website: www.dji.com
• We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• ISED Compliance Notice
• CAN ICES-003(B) / NMB-003(B)
• China Compliance Notice

EU & UK Compliance Notice

• EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (Zenmuse P1) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU
• .A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
• EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
• GB Compliance Statement : SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (Zenmuse P1) is in compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016.
• A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance

Environmentally friendly disposal

• Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal  collecting point via private persons is for free. The owner of old appliances is responsible to bring the  appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

WE ARE HERE FOR YOU

Contact DJI SUPPORT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>