HARD HEAD 023793 Telescopic Roof Scraper User Manual
- June 13, 2024
- Hard Head
Table of Contents
HARD HEAD 023793 Telescopic Roof Scraper
SAFETY INSTRUCTIONS
SYMBOLS
Read the instructions.
TECHNICAL DATA
DESCRIPTION
- Handle
- Head
- Metal support, 2x
- Short hex screws, 2x
- Spanner
- Hex key
- Long hex screw
- Lock nut FIG.1
ASSEMBLY
- Release the lock knob on the handle and pull out the stem to reveal the small holes. FIG. 2
- Press the small buttons on the end of the handle and put the handle in the head. FIG. 3
- Screw the metal supports on the head with the 2 short hex screws. FIG. 4
- Fasten the metal supports to the stem by putting the long hex screw through the metal supports and the stem. Screw the lock nut on the screw with the spanner. FIG. 5
- Pull out the telescopic stem by turning the lock knob on the handle clockwise and pulling out the stem to the required length. Lock by turning the lock knob on the handle anticlockwise.
- A. Turn clockwise to release lock knob for the handle.
- B. Turn anticlockwise to lock. FIG. 6
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
CONTACT
- WWW.JULA.COM.
- @ JULA AB 2022-08-24
- JULA AB
- BOX 363, 532 24 SKARA, SWEDEN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>