DECATHLON Tow Bar Car Bike Rack Instructions

DECATHLON Tow Bar Car Bike Rack

Product Information

This product is a bike rack that can be attached to a coupling ball on a vehicle. It is designed to securely hold and transport bicycles while traveling. The bike rack has multiple language options for the user manual, including English.

Product Usage Instructions

1. Before installing the bike rack on the coupling ball, make sure to remove any dirt or grease from the ball.
2. Follow the assembly instructions provided in the user manual to properly install the bike rack on the coupling ball.
3. Ensure that the bike rack is securely attached and functioning correctly before setting off.
4. Load the bicycles onto the bike rack according to the instructions provided. Make sure to distribute the weight evenly and keep the center of gravity as low as possible.
5. Remove any additional accessories or items from the bicycles, such as saddlebags or child seats, before starting your journey.
6. Use straps or similar tightening and closing devices to secure the bicycles to the bike rack.
7. Check that the bicycles are properly fastened and visible at all times. Ensure that the load does not obstruct visibility.
8. Consider using molded rubber to prevent whistling while moving.
9. It is important to comply with applicable regulations regarding the total weight of the product, its accessories, and the load it is carrying.
10. Regularly check the bike rack for any maintenance needs and ensure it is in good condition. Rinse it regularly if necessary.
11. Be aware of the increase in braking distances when using a rear bike rack system, especially when it is loaded.
12. It is recommended to attach additional lights to the back of the bike rack for increased visibility.
13. Consult the manufacturer’s manual and the vehicle manual for any specific instructions or guidelines.
14. If in doubt or for any further assistance, consult your Decathlon store or a qualified professional before use.

IN THE BOX

Important instructions for bike racks

• Keep these assembly instructions in the vehicle and make sure that any other users of the product are aware of their content.
• Carefully read these instructions before using the product for the first time.
• Please comply with any national legislation and regulations relating to the use of bike racks.

Assembly

• Assemble and install the product following the instructions.
• Do not install the product without having perfectly understood these instructions.
• Make sure that the attachment systems are fully secure.
• Repeat this check regularly.

Loading and transport

• The driver of the vehicle is responsible for ensuring that the product is securely attached and that it is working correctly.
• Check the maximum load authorized for the product in the instructions, in the manufacturer’s manual, and in the vehicle manual.
• Never exceed the maximum authorized load, which is the lowest indicated.
• The load applied to the vehicle is the total weight of the roduct, its accessories, and what it is holding.
• before driving, make sure that the load is securely attached.
• After a few kilometers, check that all of the attachment systems are still properly secured.
• Re-tighten and secure if needed.
• Check these points after each stop on your journey before setting off again.
• The load should be evenly distributed on the bike carrier, and its center of gravity should be as low as possible and as close as possible to the hitching ball.
• Loads overshooting the ends of the bike rack should meet the indications set out by the applicable regulations.
• When transporting bikes, all removable parts such as saddle bags and kids’ seats, etc. should be removed before setting off.
• Bicycles must be properly secured using appropriate straps or similar tightening and closing devices

Important

• The behavior of a vehicle is affected by the fitting of a rear bike rack system, particularly when it’s loaded.
• Driving should be adapted to take these changes into account.
• It is advisable to reduce speed, especially when cornering, and to take into account the increase in braking distances.
• Take care not to exceed the maximum speed limit authorized in your country or the maximum speed indicated in the assembly guide.
• The vehicle’s registration plate and indicator lights must be visible, check that the loading doesn’t conceal them.
• If needed, add a replica registration plate and indicator lights to the back of your bike rack.
• It is advisable to remove the rear bike rack system after use.
• Do not use spare parts for another product without having first consulted your Decathlon store.
• The product is exclusively designed for tow hooks compliant with the ISO 1103 standard and ECE-R-55 regulation.
• As each bike has its own geometry, it’s up to you to check the compatibility of your bike with the bike rack.
• For kids’ bikes, compatibility isn’t guaranteed.

Caution : Before installing the product on the coupling ball, carefully remove any dirt or grease that may be on the latter.

Maintenance

• It’s important to keep the product clean and in good condition and to regularly rinse it.
• Any parts which are damaged or deformed should be replaced immediately.
•  Store the product in a safe and dry place when not in use.

N.B. Consider using molded rubber to avoid whistling while moving. The manufacturer is not liable for any damage caused to individuals and/or objects caused by the poor and/or improper installation and/or loading of the product.
DECATHLON – 4 BOULEVARD DE MONS – BP 299 – 5965
Main material : Meta

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>