Ender-3 V3 Ender 3D Printer Creality Official Store User Manual

Ender-3 V3 Ender 3D Printer Creality Official Store

To Our Dear Users

Thank you for choosing Creality. For your convenience, please read through this User Manual before you start and follow the instructions provided carefully. Creality is always ready to provide you with high-quality services. If you encounter any issues or have any questions when using our products, please use the contact information at the end of this manual to contact us. To further improve your user experience, you can find more about our devices via the following methods: User manual: You can find instructions and videos in the USB flash disk provided with the printer. You can also visit our official website (https://www.creality.com) to find information regarding software, hardware, contact information, device instructions, device warranty information, and more.

Firmware Upgrade

1. You can upgrade the firmware directly through the device screen;
2. You can upgrade the firmware via the Creality Cloud OTA;
3. Please visit the official website https://www.creality.com, click on Service Center → Firmware/Software Download → Download the required firmware, install and use it.

Videos showing the operation of the products and after-sales service

1. Please visit https://www.crealitycloud.com/product, click “Products” and select the right model, and then click “Related” to view the tutorials on after-sales service;
2. Or contact our after-sales service center at +86 755 3396 5666, or send an e-mail to cs@creality.com.

NOTES

1. Do not use the printer in any way other than described herein in order to avoid personal injury or property damage;
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, cool and dustless environment;
3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print quality;
4. Please use recommended filaments to avoid clogging of the extrusion head and causing damage to the machine;
5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet, which accompanies the printer;
6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal injury;
7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts;
8. Use the provided tools to clean the filament from the extruder in time taking advantage of the residual temperature after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
9. Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer, wipe away dust, bonded print filament and foreign objects on the guide rails;
10. Children under 10 years old should not use the printer without supervision, otherwise it may cause personal injury;
11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes; Creality will not be responsible for any violators’ legal liability under any circumstance;
12. Tip: Do not plug in or unplug wires on a charged basis.

About the Printer

Parts List

Assembly Procedure

Material Rack Assembly Installation

1. Install the material rack and material barrel according to the diagram;
2. Align the installed material rack component holes with the locking positions to the immediate right of the gantry frame and secure them downwards smoothly.

Gantry Frame Assembly Installation

1. Select the correct voltage mode based on the local power grid voltage;
2. Place the gantry frame assembly into the slots on the base: A. First, use four M4×8 screws to align and secure the left and right screw holes on the base;
   • Then, use four M4×8 screws to align and secure the screw holes on the bottom of the base.

Touch screen Installation

1. Connect the touchscreen to the base screen using the flexible flat cable;
2. Snap the buckle on the back of the touch screen into the slots on the base.

Tips:

1. Do not power up the machine while the touch screen is connected or disconnected from the connection cable;
2. Gently pull the flexible flat cable of base screen, being cautious to avoid breaking it.

Equipment Wiring

1. First connect the filament detection line,then clip the nozzle line into the wire clip above the filament detection.
2. A. Connect the extruder kit first; B. Fix the extruder cable with cable ties; C. Install the extruder cable cover;
3. Connect the X&Z-axis motor (left);
4. Connect the X&Z-axis motor (right)；
5. Connect the limit switch cable.

About the Power-on Guide and User Interface

Power-on guide

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware UI published on the official website.

Tips: If any abnormalities occur during the self-check process, please refer to the FAQ to check for possible machine malfunctions; Alternatively, scan the QR code for “fault reporting” to report the machine issue and seek assistance from the after-sales service for problem resolution.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware UI published on the official website.

About the User Interface

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/-firmware UI published on the official website.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/-firmware UI published on the official website.

First Printing

Filament Loading

1. Input the nozzle temperature on the screen and wait for it to heat up to the target temperature;
2. Cut the front of the filament at 45° and break it off straight;
3. Arrange the filaments as shown in the picture, and then install the anti-tangle material rack;
4. A. Connect the Teflon tube to filament runout sensor; B. And thread the filament into the filament detection port until it passes through the Teflon tube; C. Fix the Teflon tube with extruder cable with cable clips.
5. Unlock the DIP switch and thread the filament into the extruder kit until the filament is extruded from the nozzle;
6. Lock the DIP switch, and insert the Teflon tube into the upper joint of the extruder kit.

LAN printing

• Install Creality Print slicing software by opening the random data on the USB flash disk.
• Log in to the official website to download for installation: https://www.crealitycloud.com/software-firmware/software?type=7

USB flash disk Printing

Tips

1. Keep the dip switch locked before printing.
2. For details on using the software, please refer to the slicing software user manual on the USB flash disk.
3. Saved files must be placed in the root directory (not a subdirectory) of the USB flash disk.
4. It is recommended to use Latin alphabet, numbers, and common characters for the file names.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware UI published on the official website.

Functional Specification

Filament Retreat

• Method 1 : Manual retract

1. Input the nozzle temperature on the screen and wait for it to heat up to the target temperature;
2. Unlock the dip switch; B. Hold the Teflon tube connector above the extruder; C. Pull out the Teflon tube;
3. Remove the old filaments by pulling them out from the back of the machine to replace with new ones.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware UI published on the official website.

Method 2: Auto retract

1. Remove the old filaments by pulling them out from the back of the machine to replace them with new ones.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware UI published on the official website.

Auto extrude

1. A.Unlock the DIP switch; B.Insert the filament into the deepest part of the Teflon tube until it cannot be moved; C.Lock the DIP switch.
2. Click on “Extrude”;
3. Waiting for the extruding process to complete.

The current interface is for reference only. Due to the continuous upgrading of functions, it shall be subject to the latest software/firmware UI published on the official website.

Equipment Maintenance

Platform plate removal and maintenance

1. When printing is finished, wait for the platform plate to cool before removing the printing platform with the model attached;
   • Slightly bend the platform with both hands to separate the model from the platform.
2. If there are residual filaments on the platform plate, scrape them off lightly with a blade and print again.
3. If the first layer of the model is not properly glued, it is recommended to apply solid adhesive evenly on the surface of the platform plate before preheating for printing.

Tips

1. Don’t bend too much for daily use to prevent deformation and unusability;
2. The printing platform is a perishable part, and it is recommended to replace it regularly to ensure that the first layer of the model sticks properly.

Optical axis maintenance
It is recommended to purchase lubricating grease for regular maintenance of the optical axis area.

Equipment Parameters

Equipment Parameters

Model| Ender-3 V3
Modeling Technology| FDM
Modeling Dimensions| 220220250mm
Leveling Method| Auto-leveling
Number of Nozzles| 1pcs
Extruder Diameter| 0.4mm
Slice Thickness| 0.1-0.35mm
Precision| ±0.2mm
Nozzle Temperature| ≤300℃
Hotbed Temperature| ≤110℃
Filaments| PLA/TPU/PETG/ABS/PLA-CF/PETG-CF/CR-carbon
Rated Power| 350W
Input voltage| 100-120V~, 200-240V~, 50/60Hz
Filament Detection| YES
Power Loss Recovery| YES
Printing Method| USB flash disk Printing / LAN printing / Cloud printing
Print file format| Gcode
Slicing Software| Creality Print
Operating Systems| Windows/MAC OS
Language| 中文/ English/ Español/ Deutsche/ Français/ Pусский/ Português/ Italiano/ Türk/ 日本語/ 한국어

Circuit Wiring

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna. Due to the differences between different machine models, the actual objects and the images can differ. Please refer to the actual machine. The final explanation rights shall be reserved by Shenzhen Creality 3D Technology Co., Ltd.

SHENZHEN CREALITY 3D TECHNOLOGY CO.,LTD.

• 18th Floor, JinXiuHongDu Building, Meilong Road, Xinniu Community,
• Minzhi Street, Longhua District, Shenzhen City, China.
• Official Website: www.creality.com
• Tel: +86 755-8523 4565
• E-mail: cs@creality.com

References

• Creality - Global Leader in Consumer-Level 3D Printer Ecosystems and Creator
• Creality - Global Leader in Consumer-Level 3D Printer Ecosystems and Creator
• [Official] Creality Product Center - Compare different 3D printers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>