inventor EP-ST22 Vacuum Cleaner User Manual

: June 6, 2024
: inventor

Table of Contents

SAFETY INSTRUCTIONS
OPERATION
USING THE DEVICE
WALL MOUNT ASSEMBLY AND USAGE
CLEANING AND MAINTENANCE
TROUBLESHOOTING
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

inventor EP-ST22 Vacuum Cleaner User Manual

SAFETY INSTRUCTIONS

If the supply cord is damaged, it must be replaced by the manufacturer, an appointed service agent or qualified professionals in order to avoid possible hazard.
This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, only if they are under supervision or have been given instructions concerning the safe use of the appliance and have understood the hazards involved.
Cleaning and maintenance shall not be made by children without supervision.
Children should not play with the appliance.
The appliance is only to be used with the power supply unit provided with the appliance.
The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
If the batteries are damaged, they must be replaced by the manufacturer, an appointed service agent or qualified professionals in order to avoid any hazard.
The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
Please keep the vacuum cleaner in laid down position when storing. The vacuum cleaner can’t stand by itself, please put it to the base stand after use.
When you pause using the vacuum cleaner, please put it to the base stand or leave it in laid down position.
Before charging, read the instructions.
For indoor use only, do not expose to rain.
Disconnect the supply before making or breaking the connections to the battery.
Beware of the risk of being caught in hair and loose clothing.
The charger must not be used if the enclosure is damaged because this will cause hazard of electric shock.
Damaged batteries must be replaced with new batteries of the same type provided by the manufacturer.
The battery charger is designed for charging the rechargeable battery provided by manufacturer.
Do not use any other charger to recharge the battery provided by manufacturer and do not try recharge other types of battery with this charger.
Also do not try to charge non-rechargeable batteries with this charger.
Before charging, check whether the voltage specified on the marking label corresponds to the mains voltage.
During charging, the appliance must be placed at well-ventilated area.
Keep the charger away from all sources of heat.
Do not insert any item through the ventilation slots on the charger.
Do not expose the charger to rain, snow or any other environment of high humidity.
Do not immerse the appliance in water.
When separating the charger from the socket, pull the body of the plug rather than the supply cord; this will avoid hazard.
Stop using the appliance in cases of drop, impact with a heavy object, other means of damage etc. If it occurs, get the charger repaired by our service agent.
Do not disassemble the battery charger by yourself to avoid fire hazard or electric shock.
Please remove the plug from the socket before cleaning or maintaining the charger.
WARNING: Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.

OPERATION

Assembly and parts description

Product Overview

Parts

Tip:
When cleaning places difficult to reach, please assemble the accessories on tube.

Battery charging

Tip:
When operating the device for the first time the battery will not be fully charged. Please remember to charge up before first usage.

Operation instruction

Put the body on horizontal surface. Connect the adaptor to the charging port on the battery pack and plug in the adaptor to the socket. When the battery is charging, the power indicator will blink continuously. One minute after the battery is fully charged, the indicator will switch off.
The approximate charging time of this appliance is 4 to 6 hours. In Max mode the battery autonomy reaches the 15 minutes. In Low mode the battery autonomy reaches the 30 minutes.

USING THE DEVICE

Press down ”Power button” to start
Press down “Power button” again to stop
The battery should be recharged only when there is one power light indicator on the led screen and continuously blinks.

WALL MOUNT ASSEMBLY AND USAGE

Wall mount assembly

When not using the cleaner, please store the cleaner on mount.
Choose the mount assembly location based on the instructions shown on the table below. Place the mount against the wall and secure the position with a screw.

CLEANING AND MAINTENANCE

Replacing the Battery

Tips

People without professional knowledge or experience should not disassemble the battery.
Battery must be replaced and repaired by professional after-sales service personnel.

Dust tank disassembly and clean

Tip:
To maintain the high suction power of the vacuum cleaner, please clean the dust in it regularly.

When the dust has reached the max line indicator press the release button, open the bottom cover of the dust tank and remove the dirt and dust.

Dust tank disassembly and clean

Cleaning of the air filter

Push down the dust tank release button and remove the tank.
Take out the cyclone from dust tank.
Disassemble cyclone and clean it carefully, all parts are washable
After airing all parts completely, assemble them according to disassembly steps

Note:
To avoid the air flow being blocked, please clean the big particle waste such as paper, cloth and others.

Cleaning of the motorized brush

Note

The roller brush and wheels may be easily entangled with hair and dust. To avoid affecting their normal operation, maintain them clean.
When disassemble and main brush, please make sure it’s not working.

Instructions

Push button and take off the brush.
Open the gland of the brush, then take out the roller brush and clean it. After cleaning it completely, assemble them according to disassembly steps.

Tips:
Don’t wash the brush.
If the brush is tangled by hair, please clean it with a sharp object such as a pair of scissors or a knife.

TROUBLESHOOTING

Please pay attention to the below prior to contacting an authorized service agent:

Problem	Possible Solution
The stick vacuum is not cleaning well

Empty the dust tank
Remove excess dust from the filters
Wash the filters
Check for blockages

The stick vacuum has stopped or won’t work|

Charge the vacuum (check the mains socket works and the switch is turned on)
it might be blocked. Check solutions 1 to 4 above
Product self-protection activated. Switch off the vacuum and leave the motor to cool for an hour then try using again

The brush motor overheatand stop work|

The floor head is blocked, refer to the “Cleaning of the motorized brush” section of this manual.
The roller brush motor has become overheated due to heavy loading. This might be due to extended use on a long pile carpet or loose rug. Leave the vacuum to cool for an hour then use it again.

DISPOSAL

As a responsible retailer, we urge you to follow the correct disposal of the appliance and all its packaging materials, helping conserve natural resources and ensuring that it is recycled in such a manner that protects the environment.
The disposal of this device should be in accordance with local laws and
regulations.
This device must be disposed separately from other domestic waste, as it
contains electronic components.
Contact your local recycling facility to learn more about disposal and recycling.

There are several alternative solutions for disposal:

A) Your local municipality has established free collection systems for electronic waste.
B) Your local retailer upon purchase of a new product.
C) The manufacturer may accept the old appliance for disposal.
D) Old appliances sometimes contain valuable resources for scrap metal dealers.

All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same. The company may not be held responsible for any misprinted information. The design and the specifications of the product for reasons, such as product improvement, are subject to change without any prior notice.

Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further details. Any future updates to the manual will be uploaded to the service website, and it is advised to always check for the latest version.

Scan here to download the latest version of this manual. www.inventorappliances.com/manuals