ZINC ZC07759 Heavy Duty Protection Pad Set User Manual
- June 4, 2024
- zinc
Table of Contents
HEAVY DUTY
PROTECTION PAD SET
READ THIS MANUAL
CAREFULLY AND FOLLOW THE
INSTRUCTIONS COMPLETELY
Complies with EN 14120:2003+A1:2007
Users with a body mass of more than 25kg to 50kg
FITTING YOUR PROTECTION PADS
ELBOW PADS… KNEE PADS
- First, open the Hook and Loop fasteners.
- The protectors are marked ‘Left Knee’, ‘ Right Knee ’, ‘Left Elbow’, and ‘Right Elbow’.
- Pull the correct protectors with sewn stockings, over the legs and arms.
- Ensure the plastic cap is centrally placed over the knee or elbow.
- Fix the protectors in place using the elastic closure straps, pulling them around the limbs and pressing the hook and loop closure in place.
- Ensure the elastic straps hold the pads firmly in place but not so tight that the blood circulation is affected. To remove the protectors – reverse the process,
WRIST GUARDS
- First, open the Hook and Loop fasteners.
- The guards for the wrist are marked ‘Left Wrist’ and ‘Right Wrist’.
- Pass your thumbs through the opening of the guard, with the palm resting on its padded inside.
- Now hold in place with the 3 straps, pulling them around your hand and fixing with the hook and l o o p fastenings.
- The curved protective rail is now located in the middle of the palm.
- They must be firmly attached but not so tight that the blood circulation is affected. To remove the guards – reverse the process.
CLEANING YOUR PROTECTION PADS
Surface wipe clean only. Do not use bleach. Do not machine wash.
Dry at room temperature, away from heat sources.
Material: 15% Elastic / 25% Polye ster / 22% EVA foam /1 5 % Polypropylene
Shell Style / 2 3 % Lining.
SAFETY INFORMATION
INSPECTION:
Carefully inspect the protection pads before each use. If they no longer feel
secure or are showing signs of wear or damage, please discard them – as their
performance may be reduced.
WARNING:
The protectors are not intended to provide protection in the event of a
serious fall when traveling at speeds in excess of 12kph or 7.46mph. These
protectors help protect against superficial grazing and minor impact. Do not
store in direct sunlight. Adult supervision is recommended during fitting.
Please be aware that changes in environmental conditions such as temperature
can significantly reduce the performance of the protective pads. Please use
the product in the manner it was intended. Any contamination, alteration to
the protector, or misuse would dangerously reduce the performance of the
protective pads. Please fit the protective pads so the adjustable straps
provide a comfortable but secure fit. Please note that no protection can offer
full protection against injury. The expected service life of the protectors is
2 years! After this period, the protectors must be replaced because they might
no longer perform adequately.
Performance levels
Level 1: Protectors intended to be suitable for normal roller sports.
Level 2: Protectors intended to be suitable for use in acrobatic roller
sports.
3 ranges of body mass are as follows:
Range A: Users with up to 25 kg body mass;
Range B: Users with a body mass of more than 25 kg to 50 kg;
Range C: Users with body mass above 50 kg.
Item: 30068.
ZC07759 / 07760 / 07761, Level 1, Size L, Range B Manufacture year: 2021
CUSTOMER HELPLINE
Hy-Pro advises you to contact us directly and not to return this item to the place of purchase. Hy-Pro has taken great care to ensure this item has reached you in good condition, should you have a query please ring our helpline at +44 (0) 800 731 0006 where your call will be dealt with promptly. Alternatively, please email customerservices@zinchq.com. REMOVE ALL THE PACKAGING BEFORE GIVING IT TO A CHILD.
- PLEASE RETAIN THE PACKAGING AND MANUAL FOR FUTURE REFERENCE
- COLOUR & CONTENTS MAY VARY FROM THOSE SHOWN ON THE PACKAGING
Protection pads are designed to protect against impact caused by the collision of part of the body with an obstacle while doing roller sports. It has passed EN 14120:2003+A1:2007 to show conformity to the EHSR of EU 2016/425. EU Type examination conducted by: TUV SOD Product Service Gmbh, RidlerstraBe 65, 80339 Munchen, Germany. Notified Body No: 0123. www.hy-pro.co.uk wwvv.zincsports.com
Hy-Pro House, Centers Park, Arenson Way,
Dunstable, Bedfordshire LU5 5BN. UK
Hy-Pro Europe: Cube Building, Monahan Road, Cork,
T12H1XY – Republic of Ireland.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>