GRAM K3iX Stainless Steel Indicator User Guide
- June 9, 2024
- GRAM
Table of Contents
GRAM K3iX Stainless Steel Indicator User Guide
PACKAGING
1 x 220 V/12 VDC 1A mains adapter.
1 x K3iX weight indicator
Accompanying documentation
LCD DISPLAY
SCALE SETTINGS MENU OPTIONS
For access the settings menu press the Esc / M key. ¿ validate the current
setting / moves to the next digit when editing a numeric value ¿¿ validate a
manually input value.
ESC Returns to the menu’s previous level without making any change.
ß à change to the next / previous option. ¯ changes between the different
values that can be assigned to a specific option.
= Factory setting
For access the settings menu press the Esc/M key. ¿ validate the current
setting / moves to the next digit when editing a numeric value. ¿¿ validate a
manually input value.
ESC Returns to the menu’s previous level without making any change.
ß à change to the next / previous option. ¯ changes between the different
values that can be assigned to a specific option.
= Factory settings
SCALE CALIBRATION
At the SCAlE menu you will find the settings needed to define and adjust the
measurement scale of the instrument: Measurement unit, maximal capacity, scale
interval (division), decimal point, as well as different options related to
the operation of the auto-zero device.
Access to these configuration options is reserved for technical personnel and
is protected by a keyword to avoid accidental changes that would cause the
instrument to malfunction.
It is possible to directly access the adjustment (calibration) function of the
instrument when the indicator is turned on.
To do this, turn on the indicator, and while the LCD test appears with all segments on, press the and same time (one short press, not sustained).
keys at the
Once you have entered the access code to the scale settings menu, with the scale empty, select the option CALIB.
-
The display will show that the acquisition of the initial zero value is in progress with the blinking message “CAL 0”.
-
Once the zero value has been adjusted, place the adjustment weight (a standard weight) on the load receptor.
-
Enter the weight value in the indicator, including the decimal positions. Use the cursor movement keys to move through the different positions on the display.
-
Once you enter the weight value, double click the ¿ key to validate and move to next step. The display will show the blinking message “-CAL-” while acquiring the adjustment value.
-
Lastly, it will show the message “GEO” for a few seconds, asking for the code of the geographical location where you did the adjustment.
The geographical location code is a value from 0 to 31, which you must choose from the attached table. Use the and ¯ keys to change the value and validate by clicking on the ¿ key. -
Lastly, the message “SAVE” will briefly appear, indicating that the adjustment has been saved in the non-volatile memory. The indicator returns to normal use mode, displaying the weight on the load receptor.
If the automatic correction of the weight according to the geographical
latitude and height (“G-COR option”) is set to ON, the next time you switch on
the indicator after an adjustment, once the display test and initial welcome
message is completed, the user will be asked to enter the value corresponding
to the geographical area where the scale will be used.
Once the value has been entered for the geographical area where the scale is
placed, it is recorded in the nonvolatile memory of the indicator, and the
user will not be asked for it again.
The geographical area where the scale is used can be modified later whenever
you wish by entering the menu with NEnU àSCALE à CAL à G-SET à GEO à G nn
(being nn {0-31}).
The automatic correction of the setting according to geographical area can be
disabled by entering the menu with NEnU àSCALE à CAL à G-SET à G-Cor à OFF
TABLE OF GEOGRAPHICAL ADJUSTMENT VALUES
CONNECTIONS
MORE INFORMATION
Download the full manual from the following link:
https://gram-group.com/wp-
content/uploads/2022/02/MU_K3X_V6_001_ENG.pdf
Gram Precision S.L. Travesía Industrial, 11 · 08907 Hospitalet de Llobregat ·
Barcelona (Spain)
Tel. +34 902 208 000 · +34 93 300 33 32
Fax +34 93 300 66 98
comercial@gram.es
www.gram-group.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>