Solar Lighting DIRECT SLDPLSFM10W Portable Lighting System with 3 LED Bulb Lights Radio Bluetooth Instruction Manual

Solar Lighting DIRECT SLDPLSFM10W Portable Lighting System with 3 LED

Bulb Lights Radio Bluetooth

Product Information

Specifications:

• 1 PLS Fitting with Radio, BT & Torch x2
• 1 Mains Charger
• 3 LED Bulb Lights with Switch
• 1 USB Device Charger
• 1 Remote Solar Panel

Product Usage Instructions

Installation Method:
Refer to the provided user manual for detailed installation instructions.

Charging:

• Via Solar Panel: Connect the solar panel plug to the ‘Solar Panel Charging Input’ port. The ‘Charging Indicator’ will flash when charging.
• Via AC Electricity: Connect the adaptor to the ‘Mains Input for charging’. The ‘Charging Indicator’ will flash when charging.

Charge Indicator Lights:
When fully charged, the ‘Power Indicators’ L (Low), M (Medium), & H (High) will be lit. Recharge when it drops to Low (L).

LED Bulb Lights:
Plug each cable into the ‘6V Bulb Loading’ ports. Activate lights by switching the ‘Master ON/OFF Switch’ ON and use individual switches on LED Bulb light cables to control them.

Mobile Charging:
Connect the device charging cable to the USB slot in the ‘5V Mobile Charging Output’ and activate charging by switching the ‘Master ON/OFF Switch’ ON.

Radio:

• Press ‘M’ button for radio mode.
• Long press to save channel.
• Short press for previous/next channels.
• VOL- for volume down, VOL+ for volume up.

Bluetooth:

• Press and hold ‘M’ button for Bluetooth connection.
• You should hear 2 beeps upon successful connection.

FAQs:

• Q: How do I know when the product is fully charged?
  A: The ‘Power Indicators’ L (Low), M (Medium), & H (High) will all be lit when fully charged.

• Q: How do I activate the LED Bulb Lights?
  A: Plug each cable into the ‘6V Bulb Loading’ ports and switch the ‘Master ON/OFF Switch’ ON.

Packaging Contents

• 1 PLS Fitting with Radio, BT & Torch x2
• 1 Mains Charger
• 3 LED Bulb Lights with Switch
• 1 USB Device Charger
• 1 Remote Solar Panel

Installation Method

• Charging: Please refer to Figure 1

  • VIA SOLAR PANEL – To charge your lighting system via the Solar Panel, simply connect the plug on your solar panel to the ‘Solar Panel Charging Input’ Port. When it starts to charge, the ‘Charging Indicator’ will flash.
  • VIA AC ELECTRICITY – To charge your lighting system via Mains Electricity, simply connect your Adaptor into the ‘Mains Input for charging’. When it starts to charge, the ‘Charging Indicator’ will flash.

• Charge Indicator Lights:
  When fully charged your ‘Power Indicators’ L (Low), M (Medium) & H (High) will all be lit. As you use your Lighting System the battery percentage will gradually drop, meaning an indicator light will drop off to M (Medium) & L (Low). When the charge drops to L (Low) please charge your system back up to H (High).

• LED Bulb Lights: Please refer to Figure 1
  Plug each cable into the ‘6V Bulb Loading’ ports. To activate lights simply switch the ‘Master “ON/OFF” Switch’ “ON” and use the individual switch on each LED Bulb light cable to turn your lights On/Off.

• Mobile Charging: Please refer to Figure 1
  Connect the device charging cable via the USB slot into the ‘5V Mobile Charging Output’ & activate charging by switching the ‘Master “ON/OFF” Switch’ “ON”.

• Radio:

• Bluetooth:
   Press and hold the ‘M’ (Mode) button for Bluetooth connection. Once connected successfully you should hear 2 ‘beep’ sounds from the fitting. You are now connected to Bluetooth.

W: solarlightingdirect.com.au
Ph: 1300 135 911

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>