Solar Lighting DIRECT SLDFL10W-DC Commercial Flood Lights Instruction Manual

Solar Lighting DIRECT SLDFL10W-DC Commercial Flood Lights

Specifications

• Model No.: SLDFL10W-DC, SLDFL30W-DC, SLDFL50W-DC
• Features:
  • Plug and Play Installation
  • Built-in Photo Electric Cell
  • RF Remote Control Operation
  • Brightness Adjustable
  • Time Adjustable
  • Day-Night Sensor
  • Wall Mounting Bracket
  • Dual Colour LED Technology (Warm White OR Cool White LEDs)
  • Tempered Safety Glass
  • 5m Connection Cable
  • Dimmable

Product Usage Instructions

Remote Operating Instructions

Automatic Mode (Day/Night)

To Activate Automatic Mode: Press 25% button, light will work from dusk to dawn.

Light Operating Instructions

1. After unpacking and installation, locate the LED CCT Selector Switch.
2. Select the LED Colour Temperature by flicking between positions I and II.
3. In Manual Mode, press ‘MODE’ button to control the light manually.
4. In Manual Mode, use ON/OFF buttons to turn the light on or off at any time.

FAQ

• Q: How do I switch between Warm White and Cool White LEDs?
  • A : Use the LED CCT Selector Switch to choose between Warm White and Cool White LEDs.
• Q: What happens if the light remains at 100% brightness?
  • A : The light will remain at full brightness until the battery discharges or there is daylight.
• Q: Can I connect the flood light to a solar panel for extended periods?
  • A : Do not connect the flood light to a solar panel for a prolonged period when the LED CCT Selector Switch is in the ‘OFF’ position, as this may cause battery failure and void the warranty.

PACKAGE CONTENTS

1. Light Fitting
2. Remote

FEATURES

1. “Plug and Play” Installation
2. Built in Photo Electric Cell
3. RF Remote Control Operation
4. Brightness Adjustable
5. Time Adjustable
6. Day-Night Sensor
7. Wall Mounting Bracket
8. Dual Colour LED Technology
   • (Warm White OR Cool White LEDs)
9. Tempered Safety Glass
10. 5m Connection Cable
11. Dimmable

LIGHT OPERATING INSTRUCTIONS

1. After unpacking your flood light and installation is complete, locate the LED CCT Selector Switch (FIGURE 1).
2. You can select the output LED Colour Temperature of your light by flicking between positions I and II of the black LED CCT Selector Switch (FIGURE 1). If this switch is in the centre position no light will be emitted

Important Note:

Connection to the solar panel for a prolonged period of time whilst the LED CCT Selector Switch is in the “O” position may cause battery failure and void warranty.

REMOTE OPERATING INSTRUCTIONS

A) Automatic Mode (Day/Night)

To Activate Automatic Mode:

• Press 25% button, light will work auto dusk to dawn
• Whilst in auto mode, if buttons 1-6 are pressed this will determine the time (hours) that the light will operate at full brightness before reducing to 50%
• Once the light is operating at 50% brightness, if another number (1-6) is pressed then the timer process will restart
• Note: If buttons 1-6 are not pressed, the light will remain at 100% brightness until the battery discharges or there is daylight
• ON/OFF Buttons are invalid
• Brightness is adjustable while in operation

B) Manual Mode

To Activate Manual Mode:

• Press the ‘MODE’ button, the light can now be controlled manually
• ON/OFF buttons can turn light on or off at any time, day/night
• In Manual Mode, if buttons 1-6 are pressed, this will determine the hours the light will operate at 100% brightness before switching off
• ON/OFF Buttons are valid
• Brightness is adjustable while in operation

CONTACTS

• Customer Support Number : 1300 135 911
• www.solarlightingdirect.com.au

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>