GERMANY DETECTOR Faraon P3000 Metal Detector Gyratory Antenna User Manual
- June 3, 2024
- GERMANY DETECTOR
Table of Contents
GERMANY DETECTOR Faraon P3000 Metal Detector Gyratory Antenna
The FARAON P3000 is a high technology pulse induction metal detector (pi) with
200mhz frequency (pulse width 170) which includes a rotating antenna to detect
digital dowsing and electromagnetic fields, this equipment is ideal for
searches for hidden treasures which gives a power 20 meters deep and 1000
meters away in rotating antenna mode.
This equipment has APK mode. Realtime graphic radar ANDROID cell phone
application with two (2) functions, detects dowsing and electromagnetic
fields, can be turned on at the same time or operated separately.
THIS EQUIPMENT INCLUDES
- 01 Pulse Metal Detector Box (pi).
- 01 Charger 12v.
- 01 Digital Radiesthesia Rotating Antenna.
- 01 Metal Antenna.
- 02 Frequency Antenna.
- 01 Connection Cable.
- 01 Rotating Handle.
- 01 Coil
- APK Android Application.
DETECTOR BOX
MAIN SCREEN
DIGITAL DOWSING
Connect the 2P cable to the antenna handle and to the 2P connection of the
frequency box.
Turn on the antenna and activate the RADIESTHESIA and ELECTROMAGNETISM mode,
so the antenna will be ready for connection to the frequency box.
To access the frequency menu of the dowsing mode, press the ENTER key and you
will find all the frequencies digitally already set in the device.
Once we have established with the UP/DOWN buttons which type of metal or stone
we are going to search by means of the art of dowsing, we press the ENTER
button and now we enter the digital frequencies of that selection.
Once we have established with the UP/DOWN buttons which frequency we are going
to search by dowsing, we press the ENTER button and now the box will be
searching for that object.
METAL DETECTOR
For the METAL DETECTOR function, in the FARAON P3000 equipment, we connect the coil or box in the respective connection of the frequency box and turn on the equipment.
3 KNOBS MODEL
4 KNOBS MODEL
Once the equipment is turned on we can adjust the stability of the induction pulses by setting the knob called “FREQUENCY”, this knob adjusts the stability in the different types of soil for the GERMANY DETECTOR equipment the most ideal is to set the value between 5 and 6.
3 KNOBS MODEL
4 KNOBS MODEL
Then we adjust the “DISHES” knob, adjust it until the equipment generates a detection noise and slowly turn the knob back until it is silent again.
3 KNOBS MODEL
4 KNOBS MODEL
Finally we adjust the “SENSITIVITY” knob until we find a hammer sound, and
when we achieve this sound the “DETECTION LEDS” will turn on and off, the
equipment is ready to detect metals.
In the 4 KNOB MODEL we first adjust the knob “TRESH” and then “SENSITIVITY” to
your liking.
3 KNOBS MODEL
4 KNOBS MODEL
The graph on the screen will start to generate certain variations as we are
now in the metal detector mode.
ASSEMBLE LARGE COIL
We recommend that the large coil be handled by two people, and that the coil
be separated from the ground by 5 to 8 cm so that it is not disturbed by all
the minerals in it.
While searching for an object, one of the operators takes the equipment out of
reach of the coil.
This type of coil is ideal for large objects, for findings of much larger volume such as a safe, a cove or a large metal, the range will always depend on the size of the object found reaching a depth between 5 and 8 meters.
Customer Support
CONTACT US AT
www.germanydetector.co
+57 316 550 51 55
Cali – Colombia
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>