Solar Lighting DIRECT SLDIHN1-BLK-WW Solar Powered Black Powder Coated Illuminated House Number Instruction Manual
- June 1, 2024
- Solar Lighting DIRECT
Table of Contents
Solar Lighting DIRECT SLDIHN1-BLK-WW Solar Powered Black Powder Coated
Illuminated House Number
Product Information
Specifications
- Built-in Photo Electric cell
- 8-10 hours Operation per day
- Flush Wall Mount base
- 3 x Numerical sets 0-9 of Vinyl Stickers
- 1 x Alphabet set of A-F Vinyl Stickers
- Glass Lens
- SS – Stainless Steel Finish – Cool or Warm White LED’s
- BLK – Black P.C. Finish – Warm White LED’s
Important Notes
- Please ensure you place the solar panel in a location where it can achieve a minimum of 6 DIRECT SUNLIGHT
- Be aware that on overcast/cloudy days, the solar panel will still charge. However, not as efficient as a sunny day, so the battery may not reach full capacity. Therefore, your light may turn off earlier than specified
- It’s best not to install these lights underneath a street light, porch light etc. because this may stop the automatic day-night sensor triggering and result in your lights not turning on
FAQ
- Q: How long does the battery last on a full charge?
- A: The battery can last up to [specify hours] on a full charge, depending on usage.
PACKAGE CONTENTS
- 1 x Light Fitting
- 1 x Pack of Mounting Screws
FEATURES
- Built-in Photo Electric cell
- 8-10 hours Operation per day
- Flush Wall Mount base
- 3 x Numerical sets 0-9 of Vinyl Stickers
- 1 x Alphabet set of A-F Vinyl Stickers
- Glass Lens
- SS – Stainless Steel Finish – Cool or Warm White LED’s
- BLK – Black P.C. Finish – Warm White LED’s
INSTALLATION METHOD
- Remove contents from packaging
- Locate the “ON/OFF” switch and turn the light on by setting the ( I, O ) switch on the side of your fitting to ( I ) (FIGURE 1)
- Locate desired wall mount installation (ensure the location will receive maximum direct sunlight throughout the day)
- Step 1. Stick adhesive house numbers/letters on the front glass surface
- Step 2. Drill 2 holes of 8mm diameter in the wall 154mm apart from one another (FIGURE 1)
- Step 3. Put 2 plastic anchors in the holes and 2 screws into these anchors leaving the head protruding 10mm from the wall
- Step 4. Mount fitting by hooking it onto the screws (making sure it is stable)
IMPORTANT NOTES
- Please ensure you place the solar panel in a location where it can achieve a minimum of 6HRS DIRECT SUNLIGHT
- Be aware that on overcast/cloudy days, the solar panel will still charge. However, not as efficient as on a sunny day, so the battery may not reach full capacity. Therefore, your light may turn off earlier than specified
- It’s best not to install these lights underneath a street light, porch light etc. because this may stop the automatic day-night sensor triggering and result in your lights not turning on.
TROUBLESHOOTING
CONTACT
- Customer Service Number: 1300 135 911
- www.solarlightingdirect.com.au.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>