AMP 75416-01A Truck Step Instruction Manual
- June 13, 2024
- AMP
Table of Contents
AMP 75416-01A Truck Step
Product Information
This product is the AMP PART 75416-01A, designed for use with GM Silverado/Sierra 1500 trucks (Mid/Long bed Only) manufactured between 2019 and 2023. It is a step assembly that can be deployed and retracted to assist with entering and exiting the vehicle. The product includes lateral mounting brackets, a linkage assembly, a steel support bracket, frame mounts, bolts, captive washer nuts, a drill template, rivet nuts, PT screws, and a step pad. For any technical support or assistance, you can contact AMP RESEARCH TECH SUPPORT at 1-888-983-2204 (Press 2) from Monday to Friday, between 7:00 AM and 5:00 PM PST. You can also visit their website at www.amp-research.com for more information and updates.
Product Usage Instructions
- Using a 15mm Socket, assemble the lateral mounting brackets onto the linkage assembly. Place the steel support bracket between the linkage and lateral mount. Do not tighten the bolts yet. Refer to page 1 for bracket orientation based on the side of the vehicle.
- Using a 13mm socket, assemble the frame mount onto the later almount using bolts (#10) and captive washer nuts (#13). Torque the bolts to 16ft-lbs.
- Remove the factory bolt on the forwardmost bed channel. Attach the supplied drill template (#14) and bolt (#10) to the bed channel. Ensure that the template edge is parallel to the bed channel edge. Center punch the hole, remove the template, pre-drill using a 1/8 drill bit, and then drill to 17/32. Install the rivet nut with the provided steps included in the rivet nut package.
- Hand-start bolts (#10) into the factory hole and into the rivet nut.
- Slide the assembly into position and snug the bolts so that the frame mount of the assembly is snug to the bed channel. Adjust the linkage assembly so that it is parallel to the bed panel. Slide the steel bracket up to the frame and mark the hole location to be drilled. Remove the linkage assembly, pre-drill using an 1/8 drill bit, and then drill to 17/32. Install the rivet nut with the provided steps included in the rivet nut package.
- Install the assembly into position. Tighten the frame mount up to the bed channel. Slide the bracket up to the frame and assemble bolt (#12) into position. Hand-tighten only.
- Center the step pad on the lower mount and secure it using the provided PT screws. Tighten the screws to 5ft-lbs using a T25 Torx bit. Verify step pad alignment to the body line of the vehicle. Once the step pad is aligned, torque all bracket hardware to 16ft-lbs.
- To deploy the step, press down using your foot on the outside edge of the step pad.
- To retract, gently kick up on the underside of the step pad.
For product registration and to access other AMP Research products for your
vehicle, please visit their website at www.amp-
research.com/productregistration or scan the provided QR Code.
Registering your product will provide benefits such as faster service and
product updates.
Components must be configured for Passenger or Drivers-Side as shown.
Driver-Side Orientation
Passenger-Side Orientation
Remove factory bolt on forward most bed channel. Using supplied drill template (#14) and bolt (#10) attach template to bed channel. Make sure template edge is parallel to bed channel edge. Center punch hole, remove template, Pre drill using 1/8” drill bit. Then drill to 17/32”. Install rivet nut with provided steps included in rivet nut package.
Hand start bolts (#10) into factory hole and into rivet nut.
Verify step pad alignment to body line of vehicle.
To deploy the step, press down using your foot on the outside edge of the step pad.
To retract, gently kick up on the underside of the step pad.
Thank you for your recent AMP Research Purchase.
REGISTER YOUR PRODUCT TODAY FOR FASTER SERVICE & PRODUCT UPDATES
Please visit:
www.amp-research.com/productregistration or scan the QR Code
Product Registration Benefits:
- Ensure we have your purchase receipt and product info in our system which is required for warranty
- Faster and easier access to customer service and tech support in the unlikely event you need warranty or product support
- Registration helps us keep you up to date on product information and offers
To view other Amp Research products that may be offered for your vehicle. Please visit: www.amp-research.com
BEDSTEP2™ OPERATION The AMP Research BedStep2™ is foot operated and
deploys and retracts with a nudge of your foot. To deploy, press down using
your foot, on the outside edge of the step pad.
Maximum load capacityof the deployed step pad is 300 lbs.
Always use appropriate hand holds when stepping up to or down from your
truck’s cargo bed.
To retract, gently kick up on the underside of the step pad.
MAINTENANCE TIPS – The stepping surface and linkage should be
periodically washed with mild soap and water using a soft brush or sponge to
dislodge any mud, dirt or accumulated road grime. In severe driving
conditions, pressure washing the linkage is strongly recommended.
Do not apply silicone spray, waxes or protectants like Armor All” to the
stepping surfaces.
CAUTION! BEDSTEP2™ SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN
DRIVING.
AMP RE SE ARCH LIMITED WARRANTY
AMP RESEARCH warrants this product to be free from defects in material and
workmanship for THREE (3) YEARS FROM DATE OF PURCHASE, provided there has been
normal use and proper maintenance. This warranty applies to the original
purchaser only. All remedies under this warranty are limited to the repair
replacement of the product itself, or the repair or replacement of any
component part thereof, found by the factory to be defective within the time
period specified. The decision to repair or replace is wholly within the
discretion of the manufacturer. This warranty specifically excludes labor. If
you have a warranty claim, first you must call our factory at the number below
for instructions. You must retain proof of purchase and submit a copy with any
items returned for warranty work. Upon completion of warranty work, if any, we
will return the repaired or replaced item or items to you freight prepaid.
Damage to our products caused by accidents, fire, vandalism, negligence,
misinstallation, misuse, Acts of God, or by defective parts not manufactured
by us, is not covered under this warranty.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE
AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or
the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state
to state.
FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER
SERVICE 1-888-983-2204
WARNING
Be sure to read and precisely follow the provided instructions when installing
this product. Failure to do so could place the vehicle occupants in a
potentially dangerous situation. After installing or reinstalling, re-check to
insure that the product is properly installed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>