GGM Gastro IFBZ8+8 Induction Deep Fryer Instruction Manual

GGM Gastro IFBZ8+8 Induction Deep Fryer

Product Information

Specifications

• Model NO.: IFBZ8+8
• Material: Stainless steel housing, glass plate, plastic housing
• Power: AC 110V, 60Hz
• Capacity: 8 liters x 2
• Temperature Range: 50°C – 200°C

Product Usage Instructions

Setup and Installation

1. Place the induction deep fryer on a flat, stable surface near a power outlet.
2. Ensure all components are clean and dry before use.
3. Connect the plug cord to the power outlet.

Filling Oil

1. Open the lid of the fryer.
2. Fill the tank with cooking oil up to the recommended level indicated on the inside glassplate.
3. Close the lid securely.

Operating the Fryer

1. Turn on the power using the control panel.
2. Set the desired temperature using the glassplate for control.
3. Place the fry basket with food into the oil carefully.
4. Monitor the cooking process through the lid.

Cleaning and Maintenance

1. Ensure the fryer is unplugged and completely cooled before cleaning.
2. Remove the fry basket and any other removable components.
3. Wash these components with warm soapy water and dry them thoroughly before reassembly.
4. Wipe down the exterior of the fryer with a damp cloth.

Frequently Asked Questions (FAQ)

• Q: How do I adjust the oil temperature?
  A: Use the glassplate for control to set the desired temperature range between 50°C – 200°C.

• Q: Can I use solid fats in the fryer?
  A: It is recommended to use liquid cooking oils in this induction deep fryer for optimal performance.

• Q: How do I know when the oil is ready for frying?
  A: The oil temperature sensor will indicate when the oil has reached the set temperature.

Specification

• Model: IFBZ8+8
• Voltage: 220-240V ~ 50/60Hz
• Power Rate: 3500W+3500W
• Frequency: 50/60Hz
• Temperature: 60-190 °C
• Timer: 0-120min
• Max volume: 8L+8LI

Importance

1. Do not plug with wet hands.
2. Do not plug into a socket where several other appliances are plugged in.
3. Do not use if the plug cord is damaged or the power plug does not fit the socket safely.
4. Do not modify the parts, or repair the unit by yourself.
5. Do not use the unit near flame or wet places.
6. Do not use where children can easily touch the unit, or allow children to use the unit by themselves.
7. Do not place on unstable surfaces.
8. Do not heat the pot empty or overheat the pot.
9. Use the unit with sufficient space around it. Keep the front side and either right or left side of the unit clear.
10. Do not use the unit on carpet or tablecloth (vinyl) or any other low-heat-resistant article.
11. Do not block air intake or exhaust vent.
12. Do not place the unite near to the objects that are affected by magnet, such as: radios, televisions, automatic banking cards and cassette tapes.
13. The power cord must be replaced by qualified technicians.
14. Caution: Hot surface.
15. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
16. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years.
17. The temperature of accessible surfaces may be high when the appliance is operating.
18. take care when operating the appliance, as rings, watches and similar objects worn by the user could get hot when in close proximity to the hob surface
19. appliance not to be cleaned with water jet;
20. any repairs shall be carried out only by persons trained or recommended by the manufacturer.
21. care be taken to ensure that the splashback and surrounding area free of metallic surfaces
22.  non-ionizing electromagnetic radiation
23. Appliance is not intended to be operated by means of an external timer or separate remote-control system.
    Warning: Children should be supervised to ensure that they do not play with the appliance.

Safety instruction

• Please use a dedicated Earth Leakage Circuit Breaker (ELCB)
• Keep electrical appliances out of reach from children. Do not let them use the appliances without supervision.
• Never operate Better induction deepfryer in high temperature environments such as near a gas stove or kerosene stove.
• Do not put any detergents or flammable materials around the equipment.
• If the supply cord is damaged, it must be replaced by its service agent or similarly qualified persons in order to avoid hazard.
• during and after cooking., the corresponding heating zone is still hot. Never touch the surface and switch on the tap to avoid hurting. Children should keep a safety distance during and after cooking.
• Never flush with water directly as to avoid dangers.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the deepfryer since they can get hot.
• Overheated oil: If the self-protection function of the induction deep fryer is invalid during cooking, maybe cause fire. If the fire is caused by oil, do not put off fire by pouring water unto it. Place a lid to cover the fire and switch off the electric current.

Product Structure

1. Lid
2. Fry basket
3. Fryer screen
4. Control panel
5. Tap
6. Bottom plate
7. Temperature sensor

Operation preparation
Insure the tap (5) is switch off Pour the oil inside of the container slowly, insure the oil height is higher than the MIN calibration tail, but lower than the MAX calibration tail Insure the plug is well connected, the Voltage is for 220-240V.

Operating instruction

1. Press to switch on or switch off the equipment, when the deep fryer is switched ON, the equipment enters into the standby mode.

2. Operation:

3. a. After the deep fryer has been switched ON, the “Fill oil indication Lamp” blinks and the buzzer alarms to alert the user to fill oil into the oil tank. Please make sure that the oil level is over the “MIN” mark and notover the “MAX” mark. After filling oil, please press then the unit can be started from 120° C.

4. User can use and button to adjust the Set Temperatures of the deep fryer. Set Temperature range is between 60°C-190°C .When the actual temperature of the oil has not reached the set temperature, “Heating Indication Lamp” is ON and “Keeping Warm Indication Lamp” is OFF. When the actual temperature of the oil reaches the set temperature, the “Heating Indication Lamp” will be OFF and the “Keeping warm Indication lamp” will be ON.
   Note: If the deep fryer has been operating continuously for hours without being used, it shuts down automatically.

5. Timer: The user can set the timer by pressing . When the deep fryer enters into the timer mode, the user can set the time by pressing the and buttons. Timer can be set between 0-120 minutes. When the timer is set, the time will be counted down and the remaining time will be shown.

Error codes display

Self-protection function

Cleaning and Maintenance

Exhaust plate cleaning If the exhaust plate is blocked, please release the screw, push the exhaust plate upward, and take it apart for cleaning to insure the equipment can exhaust air normally.

1. Disconnect plug and wait until the unit is cooled down completely. Clean after using every time.
2. Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
3. Wipe using a dishwashing agent and damp cloth.
4. Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
5. Never run water over the unit (Water gets inside may cause malfunction).

Warning tips

1. The lip should be without water when you cover the tank.
2. Don’t put the small items and papers on the bottom To avoid damage the fan or affect the cooling system.
3. Keep away the Burning items and liquid from the Electromagnetic deep fried.

EXPLODED DIAGRAM

1. Back of the Backbox
2. liquid expansion thermostat
3. Back Box
4. Tank
5. Oil temperature sensor
6. Fixed support for sensor
7. Stainless steel housing
8. Power connect wire
9. Thermostat connect wire
10. Handle
11. Lid
12. Filter screen
13. Fry basket
14. Inside glassplate
15. Heating coil
16. Spring
17. 11A Sensor
18. FAN
19. Control box
20. Control panel
21. Glasspalte for control
22. Tubing fixing sheet
23. Tap cover
24. Тар
25. Mainboard
26. Inside Plastic housing
27. Plug cord
28. Plug cord lock
29. plug cord fixing
30. Bottom plate
31. Feet

WIRING DIAGRAM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>