HOOKE ROAD BXG.9205 Discovery Sierra Front Bumper Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.9205 Discovery Sierra Front Bumper
Product Information
Specifications
- Model: BXG.9205
- Tools Required:
- a. Drive Socket Ratchet Wrench
- b. 4mm Hex Bit Socket
- c. 10mm, 13mm, 19mm Wrench
- d. 13mm, 19mm Shallow Socket
FAQ
- Q: Can I install this product alone?
- A: It is recommended to have 2-3 people for installation due to the size and weight of the bumper.
- Q: Do I need any additional tools for installation?
- A: The required tools are listed in the manual, ensure you have them before starting installation.
Contents
Tools
Tools required
- Drive Socket Ratchet Wrench;
- 4mm Hex Bit Socket;
- 10mm, 13mm, 19mm Wrench;
- 13mm, 19mm Shallow Socket;
Installation Time
- About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.9205), please scan the QR code.
Installation Instruction
- Step 1: Remove the factory front bumper, ready to install our product.
- Step 2: Stick the EVA into the main body. To assemble the wings & the main body. Use the Hex Bolts (M1230), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12). Repeat the same installation in the other side.
- Step 3: Assemble the license plate bracket (A1, A2, A3) with the (M620) Button Head Socket Cap Bolts Screw groups. And then install it into the bumper with the (M620) Button Head Socket Cap Bolts Screw groups. Tighten up those bolts.
- Step 4: To install the Decorative Plate. Use the (M6*20) Button Head Socket Cap Bolts Screw groups.
- Step 5: To assemble the bull bar & the main body. Use the (M8*20) Hex Bolts groups. Tighten up those bolts.
- Step 6: To install the winch power control box bracket. Use the (M8*20) Hex Bolts groups. This step isn’t 100% necessary. Depends if you have the winch power control box.
- Step 7: Lift up the bumper and install it into your vehicle with the (M1235) Hex Bolts, (D12) Split Lock Washer, (M1230*2) Flat Washer, (M12) Hex Nuts . Tighten up those bolts.
- Step 8: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4x4
With The Hashtag #hookeroad If You’d Like
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>