GGM Gastro GWMTE120 Salad and Vegetable Dryer User Manual

GGM Gastro GWMTE120 Salad and Vegetable Dryer

Product Information

Specifications

• Product: Salad and Vegetable Dryer
• Model: Kasap Tip Dik Buzdolaplari
• Product Code: GWMTE120
• Dimensions (mm): 1300x660x987
• Weight (kg): 134
• Packaging Dimensions (mm): 1370x1370x1170

Product Usage Instructions

A. General Information

Before installing the appliance, read the operation and maintenance instructions carefully. Wrong installation and part changing may damage the product or cause injury. Unauthorized intervention invalidates the warranty.

B. Installation

• Place the product on a straight and sturdy ground.
• Ensure installation is done by a qualified service technician with proper licenses.
• Connect to Electric Power Supply by an authorized person.
• Ensure the voltage connected to the appliance matches the label.
• Connect the appliance to an earthed outlet following safety standards.

C. Safety Instructions

• This appliance must be used by trained personnel. In case of malfunction, turn off the appliance immediately and only allow authorized service personnel to repair it.

D. Operation

• Follow the operation instructions provided in the manual for efficient use of the Salad and Vegetable Dryer.

E. Cleaning & Maintenance

• Regularly clean and maintain the appliance as per the instructions to ensure optimal performance and longevity.

FAQ

Q: What should I do if the appliance malfunctions?

• A: Turn off the appliance immediately and contact authorized service personnel for repair. Do not attempt to fix it yourself.

Q: Can I move the appliance?

• A: The appliance should be moved using a forklift truck or on a pallet. Follow safety guidelines during transportation.

GENERAL INFORMATION

• Before installing the appliance, read operation and maintenance instructions carefully.Wrong installation and part changing may damage the product or may cause injury on people.
• These are not in our company’s responsibility to damage the appliance intentionally,negligence,detriments because of disobeying instructions and regulations,wrong connections.Unauthorized intervention to appliance invalidates the warranty.

1. This instruction manual should be kept in a safe place for future reference.
2. Installation should be made in accordance with ordinances and security rules of that country by a qualified service personnel.
3. This appliance has to be used by trained person.
4. Please turn off the appliance immediately in the event of malfunction or failure.The appliance should be repaired only by authorized service personnel.Please demand original spare part.

PRODUCT DESCRIPTION

The Professional Salad and Vegetable dryer ,that provides high efficiency has been designed to be used in industrial kitchen.

Product Code| Dimensions (mm)| Weight (kg)| Packaging Dimensions (mm)
---|---|---|---
GWMTE120| 1300x660x987| 134| 1370x1370x1170

TECHNICAL INFORMATION

TRANSPORTATION

• This appliance can not be moved by hand from area to area.It must be moved on pallet withforklift truck.

UNPACKING

• Please unpack the package according to the security codes and ordinances of currentcountry and get rid from the pack
• Parts which contacts with food are produced by stainlesssteel.
• All plastic parts are marked by material’s symbol.
• Please check that all the parts of appliance had come completely and if they are damaged ornot during the shipping.

INSTALLATION

• Please place the product to straight and sturdy ground,please take necessary steps againstpossibility of overturn.
• Technician who will serve for installation and service for the appliance must be professionalon this subject and must have installation and service licenses by the company.
• Connection to Electric Power Supply must be done by authorized person .
• Please be sure that the voltage connected to appliance must be equal with the voltage whichis on appliance’s label.
• This appliance must be connected to an earthed outlet in accordance with safety rules and standards.
• Appliance’s earthing must be connected to earthing line on panel which is nearest to electricinstallation.
• Connection to the main fuse and leak current fuse must be done in accordance with thecurrent regulations.

SAFETY INSTRUCTIONS

• Do not use the appliance in insufficient lighted place.
• Do not touch the moving attachments while the appliance operates.
• Do not install the appliance in the presence of flammable or explosive materials.
• Do not operate the appliance when the machine is empty.
• Do not load so less or more than appliance’s capacity.
• Do not attempt to use the appliance without suitable protective equipments.
• Because of any reason if there is a fire or flame flare where the appliance is used,turn off all gas valves and electric contactor switch quickly and use fireextinguisher .Never use water to extinguish the fire.
• The top lid must not be opened while the device is running.

OPERATION

Control Panel (Washing)

• A : Time Setting Button.
• B : Caldron Water Drainage Button
• C : Pump Start Button
• D : Start
• E : Water Spin Regulation Button

INSTRUCTIONS

• Make sure that drum is completely attached before you start the machine.
• Press Start button.
• Press Pump start button.
• Wait until the tank has water. Set the timer for between 0-5 minutes from the Time Setting button.
• Control the right spin cycle from the Water Spin Regulation button.
• Press Caldron Water Drainage button to reduce the amount of water inside the tank or to drain the water completely.

Control Panel (Dryer):

• A : Start
• B : Time Setting Button.
• C : Stop
• When the washing process is complete, place the basket to dryer. Accordingly to the machine capacity, place the items inside the tank well balanced and evenly to prevent shakiness.
• Set the timer for between 0-5 minutes from the Time Setting button.
• Press Start button.
• The device will stop automatically when the timer is off.
• When the process is done unplug the device.
• NOT: Press Stop button to get the items out before the set time.

CLEANING & MAINTENANCE

CLEANING AND MAINTENANCE AFTER EVERY USE

• After each drying, remove and clean the drum and wash filter.
• When doing maintance and cleaning ALWAYS be sure that the divice is pluged out or the circuit breaker is down.
• Cleaning the device it’s outher surface needs to be done with a wet cloth (no running water).
• Do not use acid and derivative materials.at cleaning.
• Never use running water cleaning the surface of the device. This can cause water getting in to the electrics and motor.

PERIODIC CLEANING AND MAINTENANCE

• Maintance should be done only by authorised personel.
• Do maintance in two weeks of periodes.
• The wastewater discharge height of the device should not be higher than the distance of the exit pipe of the machine. Otherwise, the device cannot discharge the wastewater.

TROUBLESHOOTING

THE APPLIANCE DOESN’T OPERATE| 1.     Check if the appliance is plugged in.

2.     Check the electrical connections and voltage.

---|---
THE APPLIANCE IS NOISY| 1.     Check that if there is material accumulated in the tank or not.

2.     If the motor is noisy,stop it and call authorized service.

---|---
THE APPLIANCE STOPPED| 1.     The appliance can stop due to low voltage.In this situation check the voltage.

2.     The appliance may stop when it is overloaded.In this situation allow the motor to cool by taking off some materials from tank.

---|---

• When the vegetables and salads are not being dryed the right way,
• When the safety sensors and functions are not working,
• NEVER use the device.
• If these problems are still going on,contact with our authorized service.

SPARE PART LIST-EXPLODING DRAWING

PRODUCT CODE: GWMTE120

NO| PRODUCT NAME| PRODUCT CODE
1| PANEL GROUP| M.ELK-PNO-SYK-001
2| CONTACTOR LC1K0910M| M.ELK-KNT-KNT-021
3| SPINKER SET| M.MUH-095
4| PROCESTAT FLOAT| M.ELK-MUH-001
5| DRAIN PIPE| YBR-ERS.SYK-KS-0006
6| DRAIN HOSE| M.MEK-TES-HRT-065
7| DRAIN HOSE| M.MEK-TES-HRT-061
8| DRAIN HOSE| M.MEK-TES-HRT-064
9| FELT 25628| M.CNT-KCE-034
10| ENGINE SLEEVE| YDK-ERS.PS-CN-0004
11| ENGINE SLEEVE SHAFT| YTL-ERS.PS-KS-0013
12| BEARING ( 6305 ZZ )| M.RLM-NRM-009
13| FELT 30427| M.CNT-KCE-033
14| SLEEVE PULLEY| YDK-ERS.PS-CN-0009
15| 1 1/2″ FITTING| M.MEK-TES-INX-008
16| VALVE| M.ELK-MTR-PMP-014
17| MASHON| YBR-ERS.SYK-KS-0012
18| ENGINE PULLEY| YTL-ERS.PS-KS-0025
19| ENGINE PLATE| YDK-ERS.PS-CN-0001
20| 11 PJ 559 STRAP| M.KYS-TKY-002
21| DRUM SUPPORT SHEET| YSC-ERS.SYK-PN-0018
22| ELECTRIC MOTOR| M.ELK-MTR-RSM-099
23| VALVE| M.ELK-SLN-PLS-005
24| TOP TABLE| M.MTS-ERS-SYK-001
25| FOOT| M.AKS-AYK-INX-001
26| CHASSIS| –
27| VALVE HOSE| M.MEK-TES-HRT-066
28| WATER PUMP| M.ELK-MTR-PMP-013
29| ENGINE HOSE| M.MEK-TES-HRT-062
30| LOWER FILTER| ARA-ERS.SYK-0004
31| CLAMP INTERMEDIATE SHAFT| YTL-ERS.SYK-KS-0008
32| POOL INNER FILTER SHEET| YSC-ERS.SYK-PN-0011
---|---|---
33| BASKET| ARA-ERS.SYK-0003
34| WASHING COVER| M.ENJ-ERS-PLS-SYK-001
35| PANEL SHEET| YSC-ERS.SYK-LZ-0020
36| GREEN BUTTON (PERMANENT)| M.ELK-SLT-BTL-009
37| TIME CLOCK| M.ELK-MEK-MTM-003
38| SMALL PANEL SHEET| YSC-ERS.SYK-LZ-0021
39| RED BUTTON (MOMENTARY)| M.ELK-SLT-BTL-010
40| BUTTON| M.ENJ-ERS-PLS-PS-018
41| GREEN LIGHTED BUTTON| M.ELK-SLT-BTL-011
42| DRYING COVER SHEET| YSC-ERS.SYK-LZ-0006
43| DRYING COVER| M.ENJ-ERS-PLS-SYK-002
44| DRUM| ARA-ERS.SYK-0002
45| DRUM PLASTIC| YTL-ERS.SYK-KS-0011

ELECTRIC CIRCUIT SCHEMA

References

• Materialscluster Styria

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>