MIKROE MCU CARD 7 for PIC PIC18F86J50 Multi Adapter User Guide
- June 16, 2024
- MikroE
Table of Contents
MIKROE MCU CARD 7 for PIC PIC18F86J50 Multi Adapter
Product Information
Specifications
Type| Architecture| MCU Memory (KB)| Silicon Vendor| Pin count| RAM (Bytes)|
Supply Voltage
---|---|---|---|---|---|---
MCU CARD 7 for PIC PIC18F86J50| 8th Generation PIC (8-bit)| 64| Microchip| 80|
4096| 3.3V
Product Usage Instructions
Step 1: MCU Card Installation
To use the MCU CARD 7 for PIC PIC18F86J50, follow these steps:
- Ensure that your target device or development board is powered off.
- Locate the appropriate slot or connector on your target device or development board for inserting the MCU CARD.
- Gently align the MCU CARD’s pins with the slot or connector and insert it firmly.
- Double-check that the MCU CARD is securely connected and properly seated.
Step 2: Power Supply Connection
The MCU CARD requires a power supply to operate. Follow these steps to connect the power supply:
- Identify the power supply pins on your target device or development board.
- Connect the appropriate power cables or wires to the corresponding pins on the MCU CARD.
- Ensure that the power supply voltage matches the specified supply voltage of 3.3V.
- Verify the polarity of the power connections, ensuring correct alignment.
Step 3: Programming and Communication
To program and communicate with the MCU CARD, follow these steps:
- Refer to the PIC18F86J50 Datasheet for detailed information on programming and communication protocols.
- Connect your programming device or computer to the appropriate communication interface on your target device or development board.
- Follow the instructions provided by your programming software or IDE to establish communication with the MCU CARD.
- Use the programming software or IDE to load your desired firmware or code onto the MCU CARD.
FAQ
Q: Where can I find additional resources for the MCU CARD 7 for PIC
PIC18F86J50?
A: Additional resources, including the MCU Card Flyer, PIC18F86J50
Datasheet, and SiBRAIN for PIC18F86J50 schematic, can be downloaded from
Arrow.com. Visit the product page for the MCU CARD on Arrow.com and navigate
to the “Downloads” section.
Q: What is the supply voltage requirement for the MCU CARD?
A: The MCU CARD requires a supply voltage of 3.3V. Ensure that your power
supply provides this voltage to avoid any compatibility issues.
INTRODUCTION
PID: MIKROE-4040
MCU Card is a standardized add-on board, which allows very simple installation
and replacement of the microcontroller unit (MCU) on a development board
equipped with the MCU Card socket. By introducing the new MCU Card standard,
we have ensured the absolute compatibility between the development board and
any of the supported MCUs, regardless of their pin number and compatibility.
MCU Cards are equipped with two 168-pin mezzanine connectors, allowing them to
support even MCUs with extremely high pin count. Their clever design allows
very simple usage, following the well-established plug & play concept of the
Click board™ line of product.
Specifications
- Type 8th Generation
- Architecture PIC (8-bit)
- MCU Memory (KB) 64
- Silicon Vendor Microchip
- Pin count 80
- RAM (Bytes) 4096
- Supply Voltage 3.3V
Downloads
- MCU Card Flyer
- PIC18F86J50 Datasheet
- SiBRAIN for PIC18F86J50 schematic
Mikroe produces entire development toolchains for all major microcontroller architectures. Committed to excellency, we are dedicated to helping engineers bring the project development up to speed and achieve outstanding results.
- ISO 27001: 2013 certification of informational security management system.
- ISO 14001: 2015 certification of environmental management system.
- OHSAS 18001: 2008 certification of occupational health and safety management system.
- ISO 9001: 2015 certification of quality management system (AMS).
- Downloaded from Arrow.com.
MIKROELEKTRONIKA D.O.O, Barajnicki drum 23, 11000 Belgrade, Serbia VAT: SR105917343 Registration No. 20490918 Phone: + 381 11 78 57 600 Fax: + 381 11 63 09 644 E-mail: office@mikroe.com www.mikroe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>