ggm gastro Vegetable slicer 230 volt User Manual
- June 3, 2024
- ggm gastro
Table of Contents
ggm gastro Vegetable slicer 230 volt
GENERAL INFORMATION
Before installing the appliance, read operation and maintenance instructions carefully.Wrong installation and part changing may damage the product or may cause injury on people.These are not in our company’s responsibility to damage the appliance intentionally,negligence,detriments because of disobeying instructions and regulations,wrong connections.Unauthorized intervention to appliance invalidates the warranty.
- This instruction manual should be kept in a safe place for future reference.
- Installation should be made in accordance with ordinances and security rules of that country by a qualified service personnel.
- This appliance has to be used by trained person.
- Please turn off the appliance immediately in the event of malfunction or failure.The appliance should be repaired only by authorized service personnel.Please demand original spare part.
PRODUCT DESCRIPTION
Professional Vegetable Cutter ,that provides high efficiency has been designed to be used in industrial kitchens.
Product Code| Dimensions (mm)| Weight (kg)| Packaging
Dimensions (mm)
---|---|---|---
GSE300| 435x300x650| 29| 520x340x720
GSE400| 295x495x723| 37| 300x500x750
TECHNICAL INFORMATION
Product Code| Capacity (kh/h)| Power (Kw)| Operating
Voltage (V)
| Cable (mm²)| Fuse (A)
---|---|---|---|---|---
GSE300| 300| 0,55| 220| 3×1,5| 10
GSE400| 400| 0,75 / 80| 380| |
TRANSPORTATION
This appliance can be moved by hand from area to area.Do not crash and drop
the appliance while transporting.
UNPACKING
- Please unpack the package according to the security codes and ordinances of current country and get rid from the pack.Parts which contacts with food are produced by stainless steel.All plastic parts are marked by material’s symbol.
- Please check that all the parts of appliance had come completely and if they are damaged or not during the shipping.
INSTALLATION
-
Please place the product to straight and sturdy ground,please take necessary steps against possibility of overturn.
-
Technician who will serve for installation and service for the appliance must be professional on this subject and must have installation and service licenses by the company.
-
Connection to Electric Power Supply must be done by authorized person.
-
Please be sure that the voltage connected to appliance must be equal with the voltage which is on appliance’s label.
This appliance must be connected to an earthed outlet in accordance with safety rules and standards. -
Appliance’s earthing must be connected to earthing line on panel which is nearest to electric installation.
-
Connection to the main fuse and leak current fuse must be done in accordance with the current regulations.
VEGETABLE CUTTER and WITH SILO
SAFETY INSTRUCTIONS
- Do not use the appliance in insufficient lighted place.
- Do not touch the moving attachments while the appliance operates.
- Do not install the appliance in the presence of flammable or explosive materials.
- Do not operate the appliance when the machine is empty.
- Do not load so less or more than appliance’s capacity.
- Do not attempt to use the appliance without suitable protective equipments.
- Because of any reason if there is a fire or flame flare where the appliance is used,turn off all gas valves and electric contactor switch quickly and use fireextinguisher .Never use water to extinguish the fire.
- All the damages because of not having earthing connection will not be onwarranty.
- While the appliance is operating,do not put your hand into cutting tank.Do not pushthe vegetables with your hand,use pestle.
OPERATION
Control Panel ;
GSE300 – GSE400
- A : Off / STOP BUTTON
- B : On / START BUTTON
Operating;
- Before operating the appliance,clean the cutting tank and blades with wet cloth and dry.
- After choosing the desired blade, place the blade on the shaft.
- Be sure that the lid is closed and the latch is locked before operating the appliance.
- Put the vegetables into the cutting tank.
- Press ON/START Button.
- In order to slicee long vegetables. ( carrot,cucumber )
- While the appliance is operating,take off the pestle with one of your hand andput the vegetable with the other one.
- Slice the long vegetables by pushing with pestle.
- After the operation completed,press OFF/STOP.
CLEANING & MAINTENANCE
CLEANING AND MAINTENANCE AFTER EVERY USE
- Clean outer surface of appliance and cutting equipments with hot water and thendry.
- Always turn off the appliance and disconnect from the power supply before cleaning.
- Do not use abrasive cleaning chemicals as these can leave harmful residues.
- Do not clean the appliance by spraying water directly,otherwise electric motor mayget damaged.
PERIODIC CLEANING AND MAINTENANCE
- Get the periodic maintenance of the appliance once in every 15 days.
- Maintenance should be done by qualified person.
- The Vegetable Cutter requires low maintenance (Motor and ball bearings arelubricated ).
- The abrasion and tension of movement belt must be checked at least once in a year.
- The capacitor may have voltage in it (remaining voltage).İt is suggested to dischargethe appliance with conductor insulation. (etc.screwdriver).
- Maintenance of appliance’s contactor should be done by compressed air accordingto frequency of use.
- Maintenance of slicer blade ;
- Grind the blade with aqueous grinding wheels without disrupting blade angle.
- Maintenance of thin cubic blade and thick cubic blade ;
- If the blades are damaged after an impact,fix it with little rasp.
- Maintenance of grater ;
- Grater blades can not be rasped.
- If there is serious abrasion on grater holes,change it.
TROUBLESHOOTING
THE APPLIANCE DOESN’T OPERATE
| 1. Check if the appliance is plugged in.
2. Check the electrical connections and voltage.
3. If the appliance’s pressing handle is opened,the appliance is not operated.
4. If the cover is open, the device will not work.
5. If the cover latch to open the device will
not work.
---|---
THE APPLIANCE IS NOISY
| 1. Check the cutting discs.
2. Check that if there is material accumulated in the tank.
3. If hard materials are cut in the appliance,blades may get damaged,check it.
4. If the motor is noisy,stop it and call
authorized service.
---|---
THE APPLIANCE STOPPED
| 1. The appliance can stop due to low voltage.In this situation check the voltage.
2. If the appliance is overloaded,turn off the appliance and allow to cool down by
taking off some materials from bowl.
---|---
- If Vegetable Cutting is not done at suitable quality
- If any function of security doesn’t work
- Do not use the appliance.
- If these problems are still going on,contact with our authorized service
SPARE PART LIST-EXPLODING DRAWING
PRODUCT CODE: GSE300
NO| PRODUCT NAME| P.CODE
1| BASE FRAME| Y.GSE300.001
2| FEET| Y.GSE300.002
3| SEGMAN (471-17)| Y.GSE300.003
4| CONTROL PANEL| Y.GSE300.004
5| MOTOR| Y.GSE300.005
6| PULLEY (MOTOR)| Y.GSE300.006
7| BELT (PJ584)| Y.GSE300.007
8| PULLEY (BEARING BLOCK)| Y.GSE300.008
9| SEGMAN (472-47)| Y.GSE300.009
10| BALL BEARING (6303 2RS)| Y.GSE300.010
11| BALL BEARING (6204 ZZ)| Y.GSE300.011
12| BEARING BLOCK| Y.GSE300.012
13| SEAL (20X28X6)| Y.GSE300.013
14| BEARING BLOCK SHAFT| Y.GSE300.014
15| BOTTOM BODY| Y.GSE300.015
16| TOP LID| Y.GSE300.016
17| HINGE RING| Y.GSE300.017
18| HINGE SHAFT| Y.GSE300.018
19| HINGE LOCK PIN| Y.GSE300.019
20| SENSÖR| Y.GSE300.020
21| HINGE| Y.GSE300.021
22| HINGE SCREW| Y.GSE300.022
23| PUSHING WEDGE| Y.GSE300.023
24| PRESSER| Y.GSE300.024
25| PRESSER HANDLE| Y.GSE300.025
26| PRESSER HANDLE| Y.GSE300.026
27| PRESSER SPRING| Y.GSE300.027
28| PRESSER SHAFT| Y.GSE300.028
29| EJECTOR| Y.GSE300.029
30| FRENCH FRIES BLADE| Y.GSE300.030
31| ADJUSTABLE DISC BLADE| Y.GSE300.031
32| CUBIC DISC BLADE| Y.GSE300.032
33| ADJUSTABLE DISC| GSE300-F.01
34| 5 MM GRATER| GSE300-F.03
35| 7 MM GRATER| GSE300-F.04
36| FRENCH FRIES LOWER DISC| GSE300-F.07
37| FRENCH FRIES TOP BLADE| GSE300-F.06
38| 10X10 CUBIC BOTTOM DISC| GSE300-F.08
39| 10X10 CUBIC TOP BLADE| GSE300-F.11
40| 20X20 CUBIC BOTTOM DISC| GSE300-F.09
41| 20X20 CUBIC TOP BLADE| GSE300-F.12
42| MAGNET| Y.GSE300.033
SPARE PART LIST-EXPLODING DRAWING
PRODUCT CODE : GSE400
NO| PRODUCT NAME| P.CODE
1| PLASTIC HINGE BUSH| Y.GSE400.001
2| LOCK PLASTIC| Y.GSE400.002
3| ALUMINUM COVER B. HOPPER O. FEED| Y.GSE400.003
4| MAGNETIC SENSOR| Y.GSE400.004
5| TIMING (HUTCHINSON) BELT| Y.GSE400.005
6| 20X28X6-SUPTEX FELT| Y.GSE400.006
7| HIVE| Y.GSE400.007
8| ROLLER| Y.GSE400.008
9| RING| Y.GSE400.009
10| ENGINE PULLEY| Y.GSE400.010
11| ALUMINUM PULLEY| Y.GSE400.011
12| ELECTRIC MOTOR| Y.GSE400.012
13| CHASSIS| Y.GSE400.013
14| COVER BOTTOM GAUGE RUBBER| Y.GSE400.014
15| PANEL LABEL| Y.GSE400.015
16| LIGHTED METAL BUTTON| Y.GSE400.016
17| LAUNCHER| Y.GSE400.017
18| ADJUSTABLE DISC PLASTIC BODY| Y.GSE400.018
19| FINE GRATER SHEET| Y.GSE400.019
20| THICK GRATER SHEET| Y.GSE400.020
21| FINGER POTATO PLASTIC| Y.GSE400.021
22| FINGER POTATO TOP KNIFE ALUMINUM| Y.GSE400.022
23| FINGER POTATO PLASTIC| Y.GSE400.023
24| 10X10 CUBIC TOP KNIFE PLASTIC| Y.GSE400.024
25| LOCK PIN| Y.GSE400.025
26| HINGE SHAFT| Y.GSE400.026
27| COVER LOCK SCREW| Y.GSE400.027
ELECTRIC CIRCUIT SCHEMA
I | TERMİNAL |
---|---|
M | MOTOR |
S1 | MAGNETIC LID SENSOR |
S2 | MAGNETIC HANDLE SENSOR |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>