MANOPOLA M001 Cheetah Mag User Manual
- October 30, 2023
- MANOPOLA
Table of Contents
M001 Cheetah Mag
User Manual User’s Manual Cheetah Mag
Product specifications
Product Name: Cheetah Mag
Model No.: M001
USB-C Input: 5V 3A, 9V 3A, 12V 2.92A, 15V: 2.33A, 20V 1.75A(35W MAX)
Output: Wireless Charging: 5W/ 7.5W/ 10W/ 15W Size: 103x61x23.5mm
Weight: 210g
Safety Precautions
- Do not put the product near the magnetic card with magnetic stripe or chip (ID card, bank card, etc.) to avoid the invalidation of the magnetic card.
- Please keep the implanted medical device(pacemaker, implantable cochlea, etc.) at least 20cm directly away from the product to avoid potential interference with the medical device.
- Always keep this device dry and do not clean it with chemical agents.
- Do not crash, avoid dropping, disassemble, impale or put this device into humid conditions.
- Avoid extreme temperatures
- Do not use it to charge devices with incompatible current and voltage, which cause fire or other problems.
- The heating caused by wireless charging is a normal phenomenon(the ambient temperature will also affect the heating).
Product Diagram
Charging M001
FAQ
When it’s not charging for this device:
- Please check the cable, charger or adapter used are working.
- If not, please choose compatible components to charge it.
When it’s not charging for the phone:
- Please make sure the power is on and the is power left in this device.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>