ggm gastro SSPBRM2 Commercial Type Electrical Chocolate Sauce Machine User Manual
- June 3, 2024
- ggm gastro
Table of Contents
ggm gastro SSPBRM2 Commercial Type Electrical Chocolate Sauce Machine User Manual
PRESENTATION
Dear user;
Our best thanks to you about you to choose our product and trust in us. Our
products are used in lots of domestic cities like your choice. Our product is
manufactured according to the standard rules. We kindly remind that you to
read the user manual carefully for having the best performance against your
expectations from the product and using for long time and be sure the other
users read it, too. Please care about the rules written below before calling
the service.
WARNINGS
Please read this manual carefully and be sure the other users read it, before the product is installed and operated for first. The product will be out of warranty if you operate the device without reading the user manual. The user manual should be written carefully to install, use and the maintenance of the product that you have bought. The electrical circuit that you will plug in your product, should be suitable for the legislations. The faults are in your responsibility which are occurred by your electrical circuit. Please call the authorized service to have more information about the subjects that you have doubts or misunderstand. We wish you to have the best performance from the product. You will be charged when you want service next to you about this product.
SAFETY DETAILS
- The device works with 220-230 Volt ~ 50-60 Hz electricity.
- If the electrical cable is damaged please contact with the service.
- The device should be switched off before plugged into the electricity.
- The all flammable solid and liquid materials (cloth, alcohol kinds, petrochemical materials, wooden materials, plastic materials and curtain) should be removed from the area that the device is operated.
- Do not clean the product under flowed and pressured water.
- The device can be used together with our other products in the same product serie. There has to be at least 30 cm between the each product.
- The device should be located and operated in a suitable for legislation and well aired place. Please check the instructions before locating and operating the device.
- The device is produced to use for industrial purposes and should be used by the well educated person.
- The device should be plugged into the grounded socket out. Be sure that you have grounded line in your electricity circuit.
- All user should read the user manual.
- Keep away from the children.
- Do not use the device out its main purpose.
- Do not close the air flow holes of the device.
- The device should be located on a non-flammable surface.
- Do not operate it next to the hot machines.
- It has to be operated in a well aired place.
- Do not operate it under the sunlight directly.
- The lime on the resistance should be cleaned. Otherwise the device gets cracked and becomes out of warranty. Only use vinegar or lemon salt to clean the lime.
- Do not insert any conductive or insulation material inside of the device.
- Please use heat resistant glove against its hot surfaces.
USING THE DEVICE
5.1. FIRST USE:
-
Unpack the device from its box and check if it is damaged or not.
Do not operate it if it is damaged.. -
Take out the protection bands if there is.
-
Clean well and carefully the parts of the device which touch directly to the food.
-
Clean the device with dish detergent and dry it. do not let the water touches to the electrical parts.
-
Do not clean the device in a dish washer
5.2. USAGE:
- Plug in the device to the electricity socket out. Be sure the thermostat is switched off.
- Set the thermostat as 90°C.
- After every use the food tanks should be cleaned with the boiling water.
- Please switch off the thermostat after the service ends.
- Please plug out the device from the electricity socket out when it is out of use.
- The device should be located on a flat surface.
5.3. CLEANING:
- Plug out the device from the electricity socket before cleaning.
- The food tank should be cleaned very well after every use.
- Do not flow water to the elecrical parts. Clean the main body with a wet cloth.
- Do not clean the main body under flow water.
- Clean the lime on the resistance using via vinegar or lemon salt. If you use any chemical cleaner the device will be damaged and out of warranty.
If the lime is not be cleaned the device will be out of warranty.
5.4. CARRYING AND MOVING
- Plug out the device from the electricity socket before carrying.
- It can be carried by human power.
- Do not bump or drop the device while you carry it.
5.5. MONTAGE:
- The under set desk should be parralel with the ground and have adjustable legs when the device is use on it.
- The electricity circuit should be checked by authorized person and has to be connected to the circuit breaker that located at least 170 cm height.
- The electricity circuit should have a leakage current breaker as 30 mA.
- The device should be used with grounded electricity circuit.
5.6. EFFICIENCY USE
- Switch off the device when it is out of use.
- Allways keep the device clean.
- Please obey the directives written in the user manual.
- At 24 °C, you can have the best performance from the device.
- The device can work between -5 and +40 °C.
CLEANING AND MAINTENANCE
6.1. CLEANING:
- Clean the out surface with a sponge via using dish detergent and dry it out after every end of service beginning the first use.
- Do not use nitric acid or any kind of CHEMICAL MATERIALS to clean the device.
- Clean the lime on the resistance using via vinegar or lemon salt. If you use any chemical cleaner the device will be damaged and out of warranty.
Allways clean the lime.
6.2. MAINTENANCE:
- Before any maintenance plug out the device from the electricity socket.
- Worn off parts should be replaced with the original exparts.
- The periodical maintenance should be done by the user.
- We recommend to maintenance for about per every 2 months according to the using frequency.
- It will be charged to user for maintenance even the device is warranty.
6.3. LIFE OF THE DEVICE
The life of the device is about 10 years if it is used according to the recommendations in the user manual.
6.4. FAULTS AND FAULT SOLUTIONS
1- The device is connected to the electricity socket out but it is not working!
- Check the main circuit breaker,
- Check the electric cable of the device,
- Check the thermostat,
- If the problem still continuous please call the authorized service.
Do not struggle to fix it by your self.
6.5. SERVICE AND EXPART POINT
You can find all communication information about our services in the link below.
TECHNICAL PROPERTIES AND THE LABELS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>