Marfil Coffee Grinder

Product Information

Specifications

• Brand: Michigan-inox
• Model: Tranquilo-2
• Material: Brasil-Inox, Marfil Marfil-Inox
• Feature: Movie-Silencer

Product Usage Instructions

Operating and Rest Times

Maximum time: 30 minutes (working). Minimum Time in repose: 10
minutes (stop).

Cleaning Instructions

For Parts in Contact with Food:

• Clean with the grinder unplugged using the On/Off switch.

• For hopper cleaning, remove the hopper, wash it with a diluted
  dishwasher liquid solution, and ensure it is dry before
  re-attaching.

• Clean blades with a dry brush after removing the hopper.

• Empty and clean the dispenser using a dry brush.

• Clean the outer body with a soft cloth dampened in water.

Protections Against Moving Parts

How to Properly Use:

Ensure the safety guard in the hopper prevents contact with the
grinding blades.

Fitting Protections:

Before use, ensure the hopper is well-attached and fixed.

Special Precautions During Installation

Place the grinder on a flat, stable surface with appropriate
clearances. Electrical installation must be done by qualified
personnel following safety guidelines.

FAQ

Q: Can children use this coffee grinder?

A: This appliance can be used by children aged 8 years and older
under appropriate supervision.

Q: How often should I clean the coffee grinder?

A: Clean the parts in contact with food after each use for
optimal performance and hygiene.

Q: What should I do if the power cord is damaged?

A: If the power cord is damaged, it must be replaced by a
professional to ensure safety.

Michigan-inox Tranquilo-2

Brasil-Inox

Marfil Marfil-Inox

Tranquilo

Movie-Silencer

Brasil

User’s Manual

00 ATTENTION – Read before start-up

This appliance can be used by children aged 8 years and older and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given appropriate supervision or training in the use of the appliance in a safe way and understand the dangers involved. Children should not play with the appliance. Children without supervision should not do the cleaning and maintenance to be carried out by the user.

–

Operating and rest times:

Maximum time: 30 minutes (working).

Minimum Time in repose: 10 minutes (stop)

–

Cleaning instructions for parts in contact with food:

All cleaning must be done with the grinder unplug using On/

OFF switch (11).

For the hopper’s cleaning, you should remove the Hopper of

coffee beans (2), wash it using a highly diluted solution of dis-

hwasher liquid in water (by hand). Make sure the hopper is com-

pletely dry before re-attaching it.

Fort he blades’ cleaning, remove the coffee beans Hopper (2),

remove the platen by pressing the adjustment pawl (6). Cleaning

using a dry brush. Replace all the parts.

Fort he dispenser’s cleaning, empty the dispenser (8), remove

the dispenser lid (7). Cleaning the dispenser with a dry brush.

Replace the parts.

For the outer body of the coffee grinder cleaning, use a soft cloth

dampened in water.

00 ATTENTION – Read before start-up

–

How to properly use protections against moving parts:

There is a safety guard located in the lower portion of the coffee

bean Hopper (2) to prevent contact with the grinding blades. This

device lets the coffee beans drop but avoids the insertion of the fingers.

–

How to properly fitting the protections against moving parts

and hazards that may exist if these parts are disassembled:

Before turning the coffee grinder, make sure the Hopper (2) is wellattached and fixed.

–

Special precautions during installation:

Place the grinder on a flat and stable surface, in an appropria-

te distance from a ground mains outlet (approx. 110cm.), distan-

ced from running water and heat sources. Minimum clearances:

Width: 20cm. on both sides. Depth: 20cm in front of and behind

the grinder. Height: 30cm. on the top of the grinder. The electrical installation must be done by qualified personnel and

following safety indications: Make sure the electrical data on the coffee grinder’s specifica-

tion plate (see section 37 of this manual), connect the grinder to

a grounded mains outlet meeting the country’s regulation, protect

the power source with a suitable magneto-thermal switch, having

a suitable differential relay, make sure the mains wiring is suited

to the device’s power consumption, do not use cable extensions,

adaptors or multiple-switch boards. If the power cord is damaged,

it must be replaced.

00 ATTENTION – Read before start-up

Do not operate the coffee grinder while barefoot or with wet or damp
hands or feet, avoid wetting the outer surface of the coffee grinder,
avoid the penetration of solid objects in the interior of the grinder.
Never turn on the grinder with any moving parts not correctly in
place. Put the Hopper cover (1) in place (on the top of the Hopper (2)) after filling it. Never run the coffee grinder without the Hopper (2) properly fixed. Never run the grinder without the dispenser
lid (7) correctly in place. Take into account the maximum operation time detailed on the specification plate. While filling the Hopper (2)
make sure no objects accidentally fall into it. Always follow the ins-
tructions in this manual. Make sure the machine is not operated by
anyone who has not read this manual.

–

The appliance should not be cleaned under running water.

–

If the power cord is damaged, the manufacturer must replace

it, by its aftersales service or by similar qualified personnel.

–

Any precautions that must be taken during the maintenance

to be performed by the user:

Do not operate the coffee grinder while barefoot or with wet or damp

hands or feet, avoid wetting the outer surface of the coffee grinder,

avoid the penetration of solid objects in the interior of the grinder.

Never turn on the grinder with any moving parts not correctly in

place. Put the Hopper cover (1) in place (on the top of the Hopper (2)) after filling it. Never run the coffee grinder without the Hopper (2) properly fixed. Never run the grinder without the dispenser lid (7)

correctly in place. Take into account the maximum operation time detailed on the specification plate. While filling the Hopper (2) make

sure no objects accidently fall into it. Always follow the instructions

in this manual. Make sure the machine is not operated by anyone

who has not read this manual.

37 Specifications Plate
You will find the specifications plate sticked on the coffee grinder which we enclose to it THIS USER’S MANUAL.
The content is:

Modelo:………………

Modelo:………………

230V / 50Hz / …… / ……W 220V / 60Hz / …… / ……W 110V / 60Hz / …… / ……W

230V / 50Hz / …… / ……W 220V / 60Hz / …… / ……W 110V / 60Hz / …… / ……W

……..A /……….Rpm

……..A / ……….Rpm

T.Máximo:30 Minutos.(Marcha) T:Descanso:10 Minutos.(Paro)

T.Máximo:30 Minutos.(Marcha) T.Descanso:10 minutos.(Paro)

IP – 21

IP – 21

CE 89 / 392 / CEE

Fecha fabricación: 2017

2018

2019

2020

2021

34 36 Safety Device Preventing Contact with Grinding Blades

Residual Risks

There is a safety guard located in the lower portion of the coffee bean hopper (2) to prevent contact with the grinding blades.
This device lets the coffee beans drop into the grinder housing, but prevents fingers from getting caught due to the small size of the hole.

IT IS VERY IMPORTANT FOR YOUR SAFETY
to make sure before turning the coffee grin-
der on that the hopper (2) is well-attached and fixed by the 2 fixing points. If not, when
the coffee grinder is turned on, the grinding
blades start to spin and can be easily touched with the fingers.

3

35 Motor Thermal Protector
A thermal protector prevents overheating of the electric motor coils, cutting off power when the temperature rises above the maximum admissible level due to a malfunction like continued blockage of the motor.

Therefore, UNDER NO CIRCUMSTANCES SHOULD THE COFFEE GRINDER BE TURNED ON WITHOUT THE HOPPER (2) IN PLACE AND SECURED TO THE ADJUSTMENT PLATEN (4) BY MEANS OF THE LOCKSCREWS (3).
3

00ATTENTION – Read before start-up

Regular maintenance checks: if you observe any abnormal operation, turn off and unplug the coffee grinder immediately from the mains outlet and contact Cunill’s Technical Service. Any possible repairs must be made by Cunill’s Technical Service or by authorized dealer personnel. Do not try to modify the coffee grinder in any way. Use only Original Spare Parts, provided by the manufacturer in all repair work. All maintenance work should be done with the coffee grinder off and unplugged from the mains.

–

Any safety instruction that is considered appropriate,

apart from the previous ones required by the standard:

Cleaning precautions. Safety guidelines: before cleaning

any part of the coffee grinder make sure you turn it off using

the ON/OFF switch (11) and unplug it from the mains outlet.

Never clean the grinder submerging in water. Do not use

abrasive cleaners or chemical solvents.

Before using the coffee grinder, follow the instructions to

load coffee beans: make sure the coffee bean Hopper (2) is

correctly placed and attached. Close the trap (5) preventing

the beans from entering to the blades. Lift the Hopper lid (1), fill the Hopper (2) and closet he lid. Slide the trap (5) to its

outer position letting the beans drop into the grinder.

Table of contents
Manufacturer and Product Identification: Page 1-2 For your safety: Page 3
Description and Technical Specifications: Page 3-4-5-6-8 Identification of External Components: Page 7-9 Machine Air Noise: Page 10 Unpacking: Page 10 Electrical wiring: Page 12 Before using the Coffee Grinder: Page 12 Grinding Coffee Beans: Page 13 Obtaining a Measure of Ground Coffee: Page 13
Operating of the models MICHIGAN/HAWAI: Page 14 Obtaining a Measure of Ground Coffee: Page 15 Adjusting Coffee Grinding Level: Page15 Adjusting Ground Coffee Amount: Page 16 Maximum Operating Time: Page 16 Cleaning: Page 17 Maintenance: Page 18 Troubleshooting: Page 19 Long-Term Storage: Page 19 Usage Precautions:Page 19 Safety: Page 20 Residual Risks:Page. 21 Specifications Plate: Page 22
! EC Conformity Declaration: Page 23 When a number appears in the text in brackets (e.g. (9)), it refers to a part of the grin der which is detailed in section 08 (Identification of external components.

33 User-Adopted Safety Measures
Although coffee grinders are equipped with all the safety devices and mesures necessary for completely safe use, in order to prevent possible harm it is very important that the user follow the safety measures indecated below:
a) Never handle or operate the coffee grinder while barefoot.
b) Never handle or operate the coffee grinder with wet or damp hands or feet.
c) Avoid wetting the outer surface of the coffee grinder. If it does get wet furing operation, or even when not operating, unplug it immediately and dry it thoroughly.
d) Avoid the penetration of solid objects in the interior of the coffee grinder. If any solid or liquid accidentally falls into the machine during operation or when stopped, unplug the coffee grinder immediately and have it checked by Technical Service.
e) In general, never turn on the coffee grinder with any moving parts not correctly in place.
f) Always put the hopper lid (1) in place (on top of the hopper (2)) after filling the hopper with coffee beans and before turning on the coffee grinder.

g) Never run the coffee grinder without the hopper (2) correctly in place and attached by lockscrews (3).
h) Never run the coffee grinder without the dispenser lid (7) correctly in place.
i) In general, coffee grinders should not be run continuously for longer than 30 minutes at a time (check the specifications plate attached to your coffee grinder).
j) While filling the hopper (2), make sure no objects (necktie, scarf, hair, jewellery…) accidentally fall into the hopper or the adjustment platen (4).
k) Always follow the instructions in this manual for all processes involving operation, cleaning and maintenance.
m) Like with any other machine, make sure the machine is not operated by anyone who has not read this manual carefully and thoroughly, or who is not prepared to make appropiate use of the device, such as children.

29 Troubleshooting: Coffee Grinder dosen’t Start

31 Long-Term Storage

Consult the manufacturer’s Technical Service if the problem persists after making the following checks:
a) Make sure the mains power is live (i.e., check for possible mains power failure)
b) Make sure the electrical data on the specifications plate (see section 37 of this manual) match the mains power source.
c) TURN OFF THE COFFEE GRINDER, unplug it and check the power cord, plug and On/Off switch (11).

If the coffee grinder will not be used for a prolonged period of time, unplug it from the main outlet.
If you decide to put the coffee grinder entirely out of commission, CHECK WITH YOUR COUNTRY’S AUTHORITIES ABOUT POSSIBLE RECYCLING of the machine.
Please be environment-friendly – do not dispose of the coffee grinder any which way.

32 Usage Precautions

30 Troubleshooting: Grinding blades don’t turn
This problem is usually due to the presence of foreign objects in the coffee beans to be ground.
Consult the manufacturer’s Technical service if the problem persist after making the following checks:
a) Turn off the coffee grinder immediately using the on/Off switch (11) and unplug the machine from the mains outlet.
b) If you notice that the coffee grinder has overheated due to clockage of the grinding blades, wait until it has cooled off completely.
c) Follow the grinder cleaning instructions (section 22) to remove the foreign object.

These coffee grinders are designed to be used only for grinding roasted coffee beans and dispensing the ground coffee obtained from the grinding process. For safety reasons, it should never be used for any other purposes.
Particularly, DON’T use the coffee grinder to grind and/or dispense foodstuffs (such as creals, vegetables, fruit, nuts, sugar, etc.) or non-food products other than roasted coffee beans.
The manufacturer may not be held liable for injuries or other bodily harm to persons or animals or material damages in case of imporper use of the coffee grinder.

03Identification of the Models

31

The usage and maintenance instructions detailed in this manual are applicable to all brand-name coffee grinders which make up our present product range, with the following commercial names:
“CLASSIC”
(nº3)TRANQUILO,(nº3)TRANQUILO-2 ( n º 3 ) B R A S I L , ( n º 3 ) TA U R O , ( n º 5 ) S PA C E , (nº5)MARFIL(nº12)MICHIGAN.
“SILENCER”
(nº9)KENIA,(nº11)JAMAICA,(nº12)MOVIE (nº12)LUXO,(nº12)LUXOMATIC,(nº12) HAWAI
“ELECTRONICS”
(nº3)TRON-TRANQUILO,(nº9) TRONKENIA(nº11)TRON-JAMAICA,(nº12) LUXOMATIC.
In their respective versions “w/handle” and “automatic”.
Our ESPECIAL BAR product, which is also part of our production, is simply a motorless ground coffee dispenser. Therefore, its usage and maintenance specifications are the same as for our other manufactured products, expect for those reffering to the motor.
Our products MICHIGAN, HAWAI depends on specific operating features that are different from the others. These are also described in this manual.
Our series of products called TOP-LINE, EXCLUSIVE, modify ONLY THE OUTER FINISH of the grinders. Usage, service and maintenance instructions ARE THE SAME FOR ALL MODELS.

In this manual you will find all the information necessary for installing, using, maintaining and cleaning your coffee grinder. Follow all of these instructions carefully to ensure a long, trouble free life for your coffee grinder.
If any problem arises or you have doubts as to the contents of this manual, please do not hesitate to consult our Technical Service, which from this moment on is at your entire service.

For you Safety and Good
05 Operation

06 General Description

Coffee grinders are designed to provide safe, durable and reliable operation if used correctly. Therefore, it is VERY IMPORTANT to read this instruction manual carefully before using the coffee grinder for the first time. Follow each and every item in the order in which they appear, and pay even more attention to warnings regarding installation, use, maintenance and cleaning especially those sections marked with the symbol:
as they refer to opertions which may be HAZARDOUS TO THE USER if not perfomed correctly.
If you fail to follow the instructions, incorrect use may cause bodily harm or material damage.
The manufacturer may not be held liable for any transformation, regulation, alteration and/or modification to caffee grinders not made by qualified personnel. These may lead to material damages or bodily harm.
Although the manual which you are reading right now is written in your contry’s language, we also have this manual in all official EC languages. If you wish to obtain one of these, or a translation into any other languages, please contact our Commercial Department, which will gladly provide it to you. (You will find our address and telephone number in this manual).
Store this manual in a safe place for future reference.

All of the machines presented in this manual are coffee grinders powered by electric motor and destined for commercial use.
07 Technical Specifications
(nº3)TRANQUILO-TRANQUILO-2 – TRON Models
H: 380mm L: 280mm W: 140mm Wei: 8Kg Number of Motors: 1 Voltage: 230v -110v -Frequency: 50Hz-60Hz Phases: 1(single) – Amperage:1,15A – 2,53A Power: 0,10/270 Condenser: 10nf-450v – 40nf-400v Speed: 1300-1650-Protection Degree: IP21. Maximum continuous Service Time:30 min. Motor Equiped with Thermal Protector Tempered Steel Grinding Wheels, 60mm. Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity: 1/2Kg. Dispenser Capacity: Direct fall to holder. Disp. Adjustment: M/Placa electrónica.(Tra). Disp. Adjustment: 5Gr – 12Gr.(Tranquilo-2) Minimum Time in Repose: 10 min.

25Maintenance Precautions

26 Grinder Maintenance

Regular maintenance checks are required to ensure optimum and reliable operation of the coffee grinder. It is VERY IMPORTANT FOR YOUR SAFETY to follow the guidelines below:
a) If you observe any abnormal operation, turn off the coffee grinder, unplug it immediately from the mains outlet, and contact Technical Service.
NEVER ATTEMPT TO FIX THE COFFEE GRINDER YOURSELF.

It is important to check the condition of the grinding blades regularly. Wear of these pieces leads to lower ground coffee quality, more electrical consumption and hotter running of the electric motor. To avoid these affects, the grinding blades should be replaced when the coffee grinder has been used to grind the amount of coffee beans (in Kilos) specified in the technical data for each model (section 8).
Replacement of the grinding blades should be perfomed by Technical Service or by authorized dealer personnel.

27 Electrical Maintenance

b) Any possible repairs must be made by

Technical Service or by authorized dealer

personnel.

Check the state of the power cord,

c) Do not try to modify the coffee grinder in any way.

plug and On/Off switch (11) regularly. Should you observe any damage or wear, DO NOT TURN ON

d) Use only ORIGINAL SPARE PARTS provided by the manufacturer in all repairwork. (For greater convenience, there is even a “First-Aid Kit” for urgent repairs or

THE COFFEE GRINDER. Keep it unplugged and immediately contact CUNILL’s Technical Service.

quick replacement of parts subjected to greatest wear).

DO NOT TRY TO REPAIR IT YOURSELF.

SPARE PARTS

28 General Maintenance

e) All maintenance work should be done with the coffee grinder off and unplugged

Make regular checks of the coffee grinder’s different parts: coffee bean hopper (2), ground coffee dispenser (8), exterior of machine, etc. Should you observe any damage or wear, DO NOT TURN ON THE COFFEE GRINDER. Keep it unplugged and immediately contact CUNILL’s Technical Service.

22 Cleaning the Grinding Blades

23 23Cleaning the Dispenser

Frequency: Every 25 days.

Frequency: Every 25 days.

Use a round brush with semi-rigid bristles.

Use the same brush for cleaning the

The brush should be long enough to reach

grin-ding blades.

all parts. Try to use a brush exclusively for

cleaning the coffee grinder and store it in a

a) Unplug the grinder using the ON/

clean, dry space.

OFF switch (11).

b) Move the dispenser handle (15) back

and forth as many times as needed to

a) Unplug the grinder using

empty the dispenser (8).

the ON/OFF switch (11).

c) Remove the

b) Loosen the lockscrews

dispenser lid (7).

(3) and remove the hopper

(2).

d) Use the brush,

completely dry

c) Press the adjustment

and without

trigger (6) and keep

using any type

it pressed to free the

of liquid, to

adjustment platen (4)

clean the inner

and turn the platen

surface of the

TOWARDS THE LEFT, in

dispenser (8).

the direction of the “G”

Move the

arrow, until you remove

dispen-ser

the platen.

handle (15)

back and forth

d) Clean the grinding

to clean

teeth and all other

thoroughly.

elements in the housing

using the brush,

e) Replace the dispenser lid (7).

completely dry and

without using any type

24 of liquid.
e)Replace the adjustment

Cleaning the outer Body of the Coffe Grinder

platen (4)

and turn it TOWARDS THE

If the outside of the coffee grinder becomes

RIGHT, in the direction of the “F” arrow, un-

dirty, clean it with a soft cloth dampened

til reaching the grinding position you want.

in water. Remember to turn off the grinder

(See section 17 for coffee grinding thickness

using the On/Off switch (11) and unplug it

adjustment).

before cleaning.

Cleaning of the interior of the interior of the coffee grinder should be perfomed ONLY BY CUNILL TECHNICAL SERVICE STAFF.

07 Technical Specifications

07 Technical Specifications

(nº3)BRASIL – BRASIL-Inox Models
H: 450mm L: 355mm W: 210mm Wei: 8Kg Number of motors: 1 Voltage: 230v-110v- Frequency: 50Hz-60Hz Phases:1(single) – Amperage: 1,40A – 3,2A Power:0,12/275 Condenser : 9nf-450v – 35nf-400v Speed:1300-1650 Protection degree:IP21 Maximum Continuous Service Time:30min. Motor Equipped with Thermal Protector Tempered Steel Grinding Wheels, 60mm Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity:1Kg. Dispenser Capacity:300 Gr. Dispenser adjustment:5Gr – 12Gr. Minimum Time in Repose: 10 min.
(nº3)TAURO Model
H: 560mm L: 290mm W: 180mm Wei: 8Kg Number of motors: 1 Voltage: 230v-110v- Frequency: 50Hz-60Hz Phases: 1(single) – Amperage:1,40A-3,2A Power: 0,12/275 Condenser: 9nf-450v – 35nf-400v Speed:1300-1650 Protection degree:IP21 Maximum Continuous Service Time:30min. Motor Equipped with Thermal Protector Tempered Steel Grinding Wheels, 60mm Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity:1Kg. Dispenser Capacity:600 Gr. Dispenser adjustment: 5Gr – 12Gr. Minimum Time in Repose: 10 min.

(nº5)MARFIL – MARFIL-Inox Models
H: 610mm L: 355mm W: 210mm Wei: 9Kg Number of motors:1 Voltage: 230v-110v- Frequency: 50Hz-60Hz Phases: 1(single) – Amperage:1,80A 3,7A Power: 0,18/352 Condenser: 10nf-450v – 40nf-400v Speed:1300-1650 Protection degree:IP21 Maximum Continuous Service Time:30min. Motor Equipped with Thermal Protector Tempered Steel Grinding Wheels, 60mm Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity: 2 Kg. Dispenser Capacity: 600 Gr. Dispenser adjustment:5Gr – 12Gr. Optional: Automatic On/Off function. Minimum Time in Repose: 10 min.
(nº5)SPACE Model
H: 610mm L: 310mm W: 180mmWei: 9Kg Number of motors: 1 Voltage: 230v-110v- Frequency: 50Hz-60Hz Phases: 1(single) – Amperage:1,80A 3,7A Power: 0,18/352 Condenser: 10nf-450v – 40nf-400v Speed:1300-1650 Protection degree:IP21 Maximum Continuous Service Time:30min. Motor Equipped with Thermal Protector Tempered Steel Grinding Wheels, 60mm Duration of Grinding Wheels:500kg Cof.B.

07 Technical Specifications

07 Technical Specifications TRON- ” Electronic” –

(nº9)KENIA – KENIA.TRON Models
H:210mm L:355mm W:210mm Wei: 11Kg Number of motors: 1 Voltage: 230v-110v- Frequency: 50Hz-60Hz Phases: 1(single)-Amperage: 1,75A – 3,9A Power: 356W Condenser: 10nf-450v -40nf-400nf Speed:1300-1650 Protection degree: IP21. Maximum Continuous Service Time:30min. Motor equipped with Thermal Protector Tempered Steel Grinding Wheels 60mm Duration of Grinding Wheels:500kg Cof. B. Dispenser Capacity: 300 Gr. Dispenser adjustment: 5Gr – 12Gr. Automatic On/Off function Minimum Time in Repose: 10 min.

(nº11)JAMAICA – JAMAICA.TRON Models
H:210mm L:355mm W:210mm Wei: 12Kg Nº motores: 1 Voltaje: 230v-110v-Frecuencia: 50Hz-60Hz Phases: 1(single)-Amperage: 1,55A – 3,9A Power: 356W Condenser: 10nf-450v -40nf-400nf Speed:1300-1650 Protection degree: IP21. Maximum Continuous Service Time:30min. Motor equipped with Thermal Protector Tempered Steel Grinding Wheels: 60mm Duration of Grinding Wheels:500kg Cof. B. Dispenser Capacity: 600 Gr. Dispenser adjustment: 5Gr – 12Gr. Automatic On/Off function Minimum Time in Repose: 10 min.

18 20 Adjusting Ground Coffee Amount Dispensed by the Coffee Grinder

Cleaning Precautions

You can adjust the ground coffee dispenser (8) to obtain a SMALL MEASURE (minimum 5g.) up to a LARGE MEASURE (maximum 12 g.) as follows:

To obtain a SMALLER

Measure:

a) Stop the grinder using

the ON/OFF switch (11).

b) Remove the ground

coffee dispenser lid (7).

c)

Turn the ground

coffee screw (9) TO THE

RIGHT.

It is very important to regularly clean the coffee grinder’s different parts. To avoid any incidents, you should clean the machine with the indicated frequency following these SAFETY GUIDELINES:
a) Before cleaning any part of the coffee grinder (even the outer shell) make sure you turn it off using the on/off switch (11) and unplug the coffee grinder from the mains outlet. b) Never clean the coffee grinder using running water or submerging it in water. c) Never use abrasive cleaners or chemical solvents.

d) Replace the ground coffee dispenser lid

(7).

21 To obtain a LARGER Measure:
a) Stop the coffee grinder using the ON/

Cleaning the Hopper

OFF switch (11).

b) Remove the ground coffee screw (9) TO

THE LEFT.

Frequency: Every 25 days.

d) Replace the ground coffee dispenser lid

a) Unplug the

(7).

grinder using

ON/OFF switch

(11).

b) Loosen the

lockscrews (3)

which fasten

the hopper to

19Maximum Operating Time

the adjusment platen (4) and

remove the

The coffee grinder SHOULD NOT

hopper (2).

BE OPERATED CONTINUOSLY

c) Clean the

FOR MORE THAN 30 MINUTES.

hopper using a

If you observe any abnormal

highly diluted

operation, turn off the co-

solution of dishwasher liquid in water.

ffee

Always wash the hopper by hand, never

grinder, unplug it im-

place in the dishwasher.

mediately from the ma-

d) Make sure the hopper is completely dry

ins outlet, and contact

before re-attaching it and locking the screws

Technical Service your

(3).

dealer.

16 17 Operating the(nº12) Michigan and the (nº12) Hawai-2 Models

Adjusting Coffee Grinding Level

The models Michigan and Hawai-2 are the

only ones of our product range which does

not dispense ground coffee in measures, but

rather in “bulk”, therefore, its specific featu-

res only affect coffee dispensing.

a) In the model

Hawai-2

is possible to

regulate the

type of ground

6

coffee through

the selectionlever

of adjustment

(6)

7

putting on the

type of ground

coffee desired,

through the

frontal upper

arrow (coarse,

medium, fine, espresso and

9

8

Turkish).

b) Place the bag where you want to store the ground coffee under the holding- lever (7), the bag will be supported by the vibratory (8) plate through the one is possible a perfect settling of the ground coffee in the bag.

C) Turn on and off the grinder using the On/ Off switch (9).

This model has 1 main grinding “Silencer -63dB” motor and 2 fan motors to always get a regular grinding without overheating the ground coffee.

You can adjust the degree of grinding (finer/ coarser ground coffee) by adjusting the grinder by means of the grinder adjustment platen (4) as follows: To obtain a FINER ground coffee: a) This operation is done with the grinder working. b) Keep the adjustment trigger pressed to free the adjustment platen (4) and turn the platen TO THE RIGHT as indicated by the “F” arrow on the platen.
ATENTION: If the adjustment platen (4) is completely removed from its emplacement, the grinding blades are fully exposed, with the consequent hazard if the coffee grinder is turned on. Never operate the coffee grinder without all its moving parts correctly in place.

07 Technical Specifications

07Technical Specifications (nº12) LUXOMATIC – ” Electronic ” –

(nº12)MICHIGAN Model
H:700mm L:355mm W:210mm Wei: 18Kg Number of motors: 1 Voltage:230v-110v- Frequency:50Hz-60Hz Phases: 1(single)-Amperage: 3,1A – 6,82A Power: 0,50/680 Condenser: 20nf-450v -80nf-400v Speed:1300-1650 – Protection degree: IP21. Maximum Continuous Service Time:30min. Motor equipped with Thermal Protector Tempered Steel Grinding Wheels, 65mm. Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity: 2 Kg. Dispenser Capacity: Bags Dispenser adjustment: NO. Special Bags filling. Minimum Time in Repose: 10 min.

(nº12)LUXO – LUXOMATIC Models
H:560mm L:290mm W:180mm Wei: 18Kg Number of motors: 1 Voltage:230v-110v- Frequency:50Hz-60Hz Phases: 1(single)-Amperage: 2,1A – 4,7A Power: 500W Condenser: 16nf-450v – 55nf-400v Speed: 1300-1650-Protection degree: IP21. Maximum Continuous Service Time:30min. Motor equipped with Thermal Protector Tempered Steel Grinding Wheels, 65mm. Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity: 1Kg. Dispenser Capacity: 600 Gr. Dispenser adjustment: 5Gr – 12Gr. Automatic On/Off function Minimum Time in Repose: 10 min.

07 Technical Specifications
(nº12)HAWAI – 2 -“Cooled” Model
H:600mm L:250mm W:210mm Wei: 20Kg Number of motors: 1+ 2motor-fans Voltage: 230v-110v-Frequency: 50Hz-60Hz Phases: 1(mono)-Amperage: 5,75A -12,65A Power: 0,75/980 Condenser: 90MF-230V – 400nf-125v Speed: 1300-1650. Protection degree: IP21 Maximum Continuous Service Time:30min. Motor equipped with Thermal Protector Tempered Steel Grinding Wheels, 65mm Duration of Grinding Wheels:500kg Cof.B. Hopper Capacity: 1/2 Kg. Dispenser Capacity: BAGS Dispenser adjustment: NO Special Bags filling. Minimum Time in Repose: 10 min.
(nº12)MOVIE – “Silencer” Model
Al:660mm L:460mm W:265mm Wei: 18Kg Number of motors: 1 (op) + 1motor-fan Voltage: 230v-110v-Frequency: 50Hz-60Hz Phases: 1(mono)-Amperage: 2,1A – 4,62A Power:0,30/360 Condenser: 14nf-450v -55nf-400v Speed:1300-1650. Protection degree: IP21 Maximum Continuous Service Time:30min. Motor equipped with Thermal Protector Tempered Steel Grinding Wheels, 65mm Duration of Grinding Wheels:500kg Cof.B.Capacidad tolva: 2 Kg. Hopper Capacity: 600 Gr. Dispenser adjustment: 5Gr – 12Gr. On-Off: Automatic(Movie) On-Off:Automatic every 8 coffees-Bi.motor Minimum Time in Repose: 10 min.

14 Grinding coffee beans

15Obtaining a Measure of Ground Coffee

Turn on the coffee grinder using the On/Off switch (11). The beans will pass through the grinder and the ground coffee will fit the ground coffee dispenser.
When the ground coffee dispenser (8) is full, stop the coffee grinder using the On/Off switch (11).

a) Place the coffee-holder of the coffee machine against the Seal-saver (12), located right below the dispenser’s ground coffee outlet (8).

ONLY FOR MODELS WITH AUTOMATIC STOP: After starting the coffee grinder using the On/Off switch (11), the machine stops automatically when the ground coffee dispenser (8) drops to a certain level, the coffee grinder starts up automatically, refills the dispenser (8) and shuts down automatically once the dispenser is full.

b) Pull the dispenser handle (14) towards you to obtain a single measure. Release the handle for it to return to its position.
c) Place the coffee-holder of the coffee machine under the ground coffee press (10) and press upwards to pack the ground coffee.
If you want to obtain the same dose of ground coffee every time, try to keep the
dispenser (8) of ground coffee almost full. (Re member that this operation is automatic in models with the automatic stop feature)

12 Electrical Wiring

13 Before Using the Coffee Grinder

The electrical installation of your coffee grinder should be left to qualified personnel, always adhering to the following safety indications:
a) Make sure the electrical data on the coffee grinder’s Specifications Plate (see section 37 of this manual) match your mains power.
b) The coffee grinder must be connected to a grounded mains outlet meeting your country’s regulations.
Non-fulfilment of this requirement may constitute a serious hazard to your health. The manufacturer may not be held liable for any injuries or harm caused by a non-grounded mains power outlet.
c) The power source must be protected by means of a magneto-thermal switch suited to the power required by the coffee grinder, as indicated on the grinder’s Specifications Plate (see section 37 of this manual).
d) There should be a differential relay suited to the characteristics of the mains wiring.
e) Make sure the mains wiring is suited to the device’s power consumption.
f )Do not use cable extensions, adaptors or multiple-switch boards or plugs to connect the coffee grinder to the mains outlet.
g) If the power cord is damaged, it must be replaced by the manufacturer or its after-sales service or by qualified personnel in order to avoid a hazard.

Before using the coffee grinder for the first time, follow the instructions below to load coffee beans:

a) Make sure the coffee bean hopper (2) is correctly placed and attached by the lockscrew (3) to the grinder adjustment platen (4).

b) Close the

trap

(5) preventing

the beans

b)

from entering

the grinder

chamber.

c) Lift the hopper lid (1), fill the hopper with coffee beans (2) and close the lid.
d) Slide the trap (5) to its outer position letting the beans drop into the grinder chamber.
d)

The manufacturer may not be held liable for injuries or harm to persons and/or animals, or material damages resulting from the incorrect installation of the coffee grinder or failure to comply with any of the above indications.

08 Components Identification (Classic)
1
2
3
4
5
6
7
8
9
10
11
12
13
14 1.-Coffee bean hopper lid. 2.-Coffee bean hopper 3.4.-Grinder Adjustment platen 5.-Trap of (open/close) bean hopper. 6.7.-Ground coffee dispenser lid. 8.-Ground coffee dispenser. 9.-Ground coffee adjustment screw. 10.-Ground coffee press. 11.-On / Off switch. 12.-Direct intake (seal-saver). 13.-Coffee collection Tray. 14.-

08Components Identification (Special)
1.-Hopper lid. 2.-Hopper. 3.4.-Split pin (opening/closing) of the hopper. 5.-Adjustment pawl. 6.-Selection-lever of adjustment. 7.-Holding lever for the bags 8.-Vibrating Stainless Steel plate. 9.-On / Off switch. 10.-Air exits.
1
2
3
4
5
6
7
8
9
10

09 Machine Air Noise

10 Unpacking

The air noise value of coffee grinders was estimated based on measuring noise levels in identical machines during the grinding process. The continuous weighted “A” equivalent acoustic pressure level at the worksite for different coffee grinders is as follows:
MODEL – “Classic” dB-(A) -(nº3)Tranquilo……………..70 -(nº3)Tranquilo-2………….70 -(nº3)Brasil………………….70 -(nº3)Tauro………………….70 -(nº5)Space…………………70 -(nº5)Marfil…………………70 -(nº12)Michigan…………..70
MODEL-“Silencer” dB-(A) -(nº12)Hawai………………65 -(nº12)Movie………………65 -(nº12)Kenia……………….63 -(nº12)Jamaica…………….63 -(nº12)Luxo………………..55
MODEL-“Electronic” dB-(A) -(nº3)TRON-Tranquilo….70 -(nº9)TRON-Kenia……….63 -(nº11)TRON-Jamaica….63 -(nº12)Luxomatic………..55

Before fully unpacking your coffee grinder, make sure that the model and colour indications marked on the box match the model that you have selected.
If not, please contact your dealer. Carefully remove the contents from the box and make sure the coffee grinder has not been damaged during transportation. If you observe any damage, please inform your dealer without delay. If you suspect that the coffe grinder or any of
its parts are damaged of deteriorated,DO NOT USE THE DEVISE. Contact CUNILL’s Technical Service inmediately or get in touch eith MOLCUNILL authorized technical staff.
Before using the machine, remove all wrapping and make sure it is completely clean.
Take special pains to make sure that plastic bags and metal staples are kept out of the reach of children to prevent possible accidents.
Please, be environment – friendly. Do not dispose of the packing materials any which way. These can be recycled – both the plastic bag used to wrap the coffee grinder and the cardboard box itself are made with recyclable materials. Please check the related legislation in your country.

11 Placement of Coffee Grinder

The placement of the coffee grinder is a decisive factor, both for the perfect perfomance of the machine and for the user’s health. Its placement in an inadequate site for use can result in adverse physiological effects, for instance, uncomfortable posture or unnecessary excess effort. For this reason, please bear in mind the following precautions before deciding a site for the coffee grinder:
a) Place it on a flat, stable surface, at a height which allows easy and safe operation.
b) Place it at an appropiate distance from a grounded mains outlet which will allow you to effortlessly plug it in and unplug it (approx. 110 cm.).

e) Do not place the coffee grinder near running water or places where foreign objects can penetrate the interior of the machine.
f) Do not leave the coffee grinder near heat sources like radiators or air ducts, or where it can be subjected to direct sunlight, excess dust, rain, mechanical vibrations, or impacts.
g) To avoid internal overheating, place the coffee grinder in a properly ventilated area.
30cm

Never pull the power cord to unplug the grinder; always grip the plug.

c) Keep the following minimum clearances to ensure perfect operation of the coffee grinder, as well as for easy and safe use and cleaning:

WIDTH: There should be a minimum

clearance of 20 cm. on both sides of the

coffee grinder.

DEPTH: There should be a minimum

clearance of 20 cm. in front of and behind

the coffee grinder.

HEIGHT: There should be a minimum

clearance of 30 cm. on top of the coffee

grinder.

20cm

d).-For your convenience, place the coffee
grinder near the coffee espresso machine. This will avoid unnecessary trips back &
forth.

20cm

20cm 20cm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>