ggm gastro Stainless Steel Cabinet Refrigerator Freezers Instruction Manual
- June 2, 2024
- ggm gastro
Table of Contents
ggm gastro Stainless Steel Cabinet Refrigerator Freezers
Specifications
- Model: XYZ-2000
- Power: 120V AC, 60Hz
- Dimensions: 10″ x 8″ x 12″
- Weight: 5 lbs
- Material: Plastic
Product Information
The XYZ-2000 is a versatile home appliance designed to enhance your daily cooking experience. With its multiple cooking modes and user-friendly interface, it simplifies meal preparation and saves you time in the kitchen.
Usage Instructions
1. Setting up the XYZ-2000:
Place the appliance on a stable, flat surface near a power outlet. Ensure proper ventilation around the unit to prevent overheating.
2. Powering On:
Connect the power cord to the outlet and press the power button on the control panel to turn on the XYZ-2000.
3. Selecting Cooking Mode:
Choose the desired cooking mode using the mode selection buttons. Options may include bake, roast, broil, and more.
4. Setting Time and Temperature:
Adjust the cooking time and temperature using the respective controls on the panel. Refer to the user manual for recommended settings based on your recipe.
5. Cooking Process:
Place your food inside the appliance and close the door securely. The XYZ-2000 will start cooking according to your selected settings.
Frequently Asked Questions
- Q: How do I clean the XYZ-2000?
- A: Before cleaning, ensure the appliance is unplugged and completely cooled down. Use a damp cloth with mild detergent to wipe the interior and exterior surfaces. Do not immerse the unit in water.
- Q: Can I use metal utensils in the XYZ-2000?
- A: It is recommended to use only utensils and cookware that are approved for use with the XYZ-2000 to avoid damage to the appliance.
- Q: What should I do if the XYZ-2000 displays an error code?
- A: If you encounter an error code on the display, refer to the user manual for troubleshooting steps. If the issue persists, contact customer support for assistance.
Safety Tips
- Position on a flat, stable surface.
- A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components or service panels on this product.
- Consult Local and National Standards to comply with the following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
- DO NOT use jet/pressure washers to clean the appliance.
- DO NOT use the appliance outside.
- DO NOT use this appliance to store medical supplies.
- DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-cream makers etc.)
- DO NOT stand or support yourself on the base, drawers or doors.
- DO NOT allow oil or fat to come into contact with the plastic components or door seal. Clean immediately if contact occurs.
- Bottles that contain a high percentage of alcohol must be sealed and placed vertically in the refrigerator.
- Always carry, store and handle the appliance in a vertical position and move by holding the base of the appliance.
- Always switch off and disconnect the power supply to the unit before cleaning.
- Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities.
- If the power cord is damaged, it must be replaced by an agent or a recommended qualified technician in order to avoid a hazard.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your product.
Pack Contents
The following is included:
- Refrigerator or Freezer •Shelves x 3 (Single)/ x 6 (Double)
- Keys x 2
- Instruction manual
- Shelf guides x 6 (Single)/ x 12 (Double)
- Waste water tray
We pride ourselves on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your dealer immediately. Installation
Note: If the appliance has not been stored or moved in an upright position, let it stand upright for approximately 12 hours before operation. If in doubt allow the appliance to stand.
-
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are thoroughly removed from all surfaces.
-
Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation. Increase this distance if the obstacle is a heat source.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy water. -
Set the brakes on the castors to keep the appliance in position OR Level the appliance by adjusting the screw feet.
WARNING:
- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
The R600a and R290 refrigerant used by this refrigerator
Lock/Unlock the Doors
A lock is fitted to the doors to ensure foodstuffs are kept secure within your appliance. Use the keys provided to lock/unlock the door
Fitting the Shelves
- Place one set of shelf guides on either side of the cabinet at the desired height.
- Slide the shelf into place.
- Repeat for the remaining shelves.
- The number of shelves depend on how many you want.
Note: This is vital for ensuring correct drainage of condensation.
Operation
Storing Food
To get the best results from your appliance, follow these instructions:
- Only store foodstuffs in the appliance when it has reached the correct operating temperature.
- Do not place uncovered hot food or liquid inside the appliance.
- Wrap or cover food where possible.
- Do not obstruct the fans inside the appliance.
- Avoid opening the doors for prolonged periods of time.
Turn On
- Close the doors)of the appliance.
- Switch on the power and turn on at the socket.
- Following a beep from the display, the current temperature within the appliance is displayed.
Manual Defrost
The appliance will automatically run a defrost cycle every six hours.
Note: The cycle starts from the time the appliance is initially powered up.
To manually defrost the appliance:
-
Press and hold the DEFROST button for 5 seconds.
-
The defrost cycle will start immediately and the Defrost LED illuminates. The defrost will last a maximum of 30 minutes.
Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost will start six hours after the manual defrost has finished. -
Wastewater is collected in the wastewater tray.
Cleaning, Care & Maintenance
- Switch off and disconnect from the power supply before cleaning.
- Clean the interior of the appliance as often as possible.
- Do not use abrasive cleaning agents. These can leave harmful residues.
- Clean the door seal with water only.
- Always wipe dry after cleaning.
- Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
- Take care when cleaning the rear of the appliance. Sharp edges can cut.
- An agent or qualified technician must carry out repairs if required.
Cleaning the Condenser
Periodically cleaning the condenser can extend the life of the appliance. We recommend that our agent or qualified technician clean the condenser.
Troubleshooting
If your appliance develops a fault, please check the following table before
making a call to your retailer.
Electrical Wiring
Appliances are supplied with a 3-pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard. The plug is to be connected to a suitable mains socket. Appliances are wired as follows:
- Live wire (coloured brown) to the terminal marked L
- Neutral wire (coloured blue) to the terminal marked N
- Earth wire (coloured green/yellow) to the terminal marked E
All appliances must be earthed, using a dedicated earthing circuit. If in doubt consult a qualified electrician. Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required, they must be readily accessible.
Disposal
EU regulations require refrigeration product to be disposed of by specialist companies who remove or recycle all gasses, metal and plastic components. Consult your local waste collection authority regarding the disposal of your appliance. Local authorities are not obliged to dispose of commercial refrigeration equipment but may be able to offer advice on how to dispose of the equipment locally.
Compliance
Parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities. Products have been approved to carry the following symbol:
Attention
IN CASE THE SUPPLY CABLE IS DAMAGED, THE MANUFACTURER OR THE AFTER-SALES SERVICE, OR QUALIFIED TECHNICIAN SHALL REPLACE IT.IN ORDER TO PREVENT ANY POSSIBLE RISK. THE LAMP REPAIR AND REPLACEMENT SHALL BE CARRIED OUT BY QUALIFIED TECHNICIANS, WITH THE POWER SUPPLY DISCONNECTED. REPLACE WITH IDENTICAL LAMPS. ONLY QUALIFIED TECHNICIANS SHALL CARRY OUT THE EXTRAORDINARY MAINTENANCE INTERVENTIONS.
Disposal of packaging
All packaging materials should be disposed of in an environmentally friendly way. The cardboard may be used as scrap paper. The protective foil and the foam cushions are CFC-free. Do not allow children to play with the packaging and destroy plastic bags safely. You can break or cut the cardboard into smaller pieces and give to a waste paper disposal service.
Environmental protection
Discarded electric appliances are recyclable and should not be discarded in domestic waste! Please actively support us in conserving resources and protecting the environment by returning this appliance to the collection centres (if available).