GGM Gastro GE500ND Double-walled Dishwasher Instruction Manual

GGM Gastro GE500ND Double-walled Dishwasher

Specifications

Product Description| Professional Undercounter Type Dishwasher for industrial
kitchens
---|---
Product Code| 500-SD, 500-380-SD, GE500ND, 500-380-SDF
Dimensions (mm)| 590x660x830
Weight (kg)| 64
Packaging Dimensions (mm)| 735x650x970

Product Usage Instructions

A. General Information

• Before installing the appliance, read the operation and maintenance instructions carefully.
• Wrong installation may cause damage or injury.
• Keep the manual for future reference.

B. Installation

• Place the dishwasher on a straight and sturdy ground to prevent overturning.
• Only allow qualified service personnel to install the appliance according to country ordinances and safety rules.
• Connect the appliance to an earthed outlet following safety standards.

C. Safety Instructions

• Ensure trained personnel operate the dishwasher. In case of malfunction, turn off the appliance immediately and contact authorized service personnel for repairs.

D. Operation

• Operate the dishwasher by following the provided instructions in the manual. Do not attempt unauthorized repairs or part changes.

E. Cleaning & Maintenance

• Regularly clean and maintain the dishwasher as per the guidelines provided in the manual. Use recommended cleaning agents for optimal performance.

F. Troubleshooting

• Refer to the troubleshooting section in the manual for common issues and solutions. Contact authorized service personnel if problems persist.

FAQ

Q: Can I move the dishwasher by hand?

A: No, the dishwasher must be moved on a pallet with a forklift truck.

Q: Who should I contact for the installation and service of the appliance?

A: Only professional technicians with installation and service licenses from the company should handle installation and servicing.

GENERAL INFORMATION

• Before installing the appliance, read the operation and maintenance instructions carefully. Wrong installation and part changing may damage the product or may cause injury to people.
• It is not in our company’s responsibility to damage the appliance intentionally, negligence, detriments because of disobeying instructions and regulations, or wrong connections.
• Unauthorized intervention to appliance invalidates the warranty.

1. This instruction manual should be kept in a safe place for future reference.
2. Installation should be made under ordinances and security rules of that country by a qualified service personnel.
3. This appliance has to be used by a trained person.
4. Please turn off the appliance immediately in the event of malfunction or failure. The appliance should be repaired only by authorized service personnel. Please demand the original spare part.

PRODUCT DESCRIPTION

The Professional Undercounter Type Dishwasher, which provides high efficiency has been designed to be used in industrial kitchens.

Product Code| Dimensions (mm)| Weight (kg)| Packaging Dimensions (mm)
---|---|---|---
500-SD| 590x660x830| 64| 735x650x970
500-380-SD| 590x660x830| 64| 735x650x970
GE500ND| 590x660x830| 64| 735x650x970
500-380-SDF| 590x660x830| 64| 735x650x970

TECHNICAL INFORMATION

Product Code| 500-SD| 500-380-SD| GE500ND| 500- 380-

SDF

---|---|---|---|---
Capacity (Plate/ hour)| 500| 500| 500| 500
Water Consumption

(Lt/Piece.)

| 2.5| 2.5| 2.5| 2.5
Total Power (KW)| 6| 6| 3,55| 6
Motor Power (KW)| 0,55| 0,55| 0,55| 0,55
Operating Voltage (V)| 220-230| 380-400| 220-230| 380-400
Water Pressure ( bar )| 2-4| 2-4| 2-4| 2-4
Washing Tank Power (KW)| 2,5| 2,5| 2,5| 2,5
Rinsing Tank Power (KW)| 5| 5| 3| 5
Cable (mm²)| 3×2,5| 5×4| 3×2,5| 5×4
Fuse (A)| 32| 25| 25| 25
Max.Plate Diameter (Ø mm)| Ø320| Ø320| Ø320| Ø320
Program Number (ºC)| 4| 4| 4| 4

TRANSPORTATION

• This appliance can not be moved by hand from area to area. It must be moved on a pallet with a forklift truck.

UNPACKING

• Please unpack the package according to the security codes and ordinances of the current country and get rid of the pack. Parts which contact with food are produced by stainless steel. All plastic parts are marked by the material’s symbol.
• Please check that all the parts of the appliance have come completely and if they are damaged or not during the shipping.

INSTALLATION

• Please place the product on straight and sturdy ground, please take necessary steps against the possibility of overturn.
• The technician who will serve for installation and service for the appliance must be professional on this subject and must have installation and service licenses from the company.
• Connection to the Electric Power Supply must be done by an authorized person.
• Please be sure that the voltage connected to the appliance must be equal to the voltage which is on the appliance’s label.
• This appliance must be connected to an earthed outlet under safety rules and standards.
• The appliance’s earthing must be connected to the earthing line on a panel that is nearest to the electric installation.
• Connection to the main fuse and leak current fuse must be done per the current regulations.

SAFETY INSTRUCTIONS

• Do not use the appliance in an insufficiently lighted place.
• Do not touch the moving attachments while the appliance operates.
• Do not install the appliance in the presence of flammable or explosive materials.
• Do not operate the appliance when the machine is empty.
• Do not load so less or more than the appliance’s capacity.
• Do not attempt to use the appliance without suitable protective pieces of equipment.
• Because of any reason if there is a fire or flame flare where the appliance is used, turn off all gas valves and electric contactor switch quickly and use a fire extinguisher. Never use water to extinguish the fire.
• All the damages because of not having an earthing connection will not be on warranty.
• Do not wash the decorated dishes. Prevent silver wares from contact with the other metals.
• Before starting to use the device, it is essential to read the operating instructions and follow the instructions and warnings while you are using the device. Otherwise, the responsibility for accidents and damages that may occur belongs to the buyer.
• Installation and connection of the device must be done by experienced technicians according to the diagram. Otherwise, the responsibility belongs to the buyer.
• The ambient temperature of the device must be between 0 and 50 °C.
• Before giving the energy to the device, the supply voltage must be checked for suitability.
• Necessary precautions should be taken to prevent the liquid flow into the device and entering metal parts. Otherwise, accidents such as fire and electric shock may occur.
• In case of any malfunction, do not remove the cover of the appliance. If the fault persists, notify the service in wanting with the description.
• In case of deterioration of the device when attached to the machine, the necessary electrical and mechanical precautions must be taken to prevent accidents and damage.
• Never remove the warranty label. Otherwise, your device will be out of warranty. Repair of the device must be done by an authorized service.
• Cables that transmit the sensor and input signals to the device should be transported as far away as possible and prevented from being affected by inductive load cables operating in the supply, control, switched mode
• Shielded cables must be selected for cables carrying sensor and input signals to the device and the shield of the cable must be connected to the ground.
• If multiple electronic devices are used, a separate supply line must be drawn for each device.
• Where electrical noise is high, an isolation transformer and line filter should be used on the supply line.
• The control circuit must not be connected to the device supply line.
• Clean the front panel of the device with a soft, damp cloth. Do not use thinner etc.
• Avoid using high-torque screwdrivers during installation of the device.

OPERATION

TOUCHSCREEN WARNINGS

• When the machine is energized, you should not touch any buttons until the On / Off button lights up
• The types of touches are given below.

CLEANING & MAINTENANCE

CLEANING AND MAINTENANCE AFTER EVERY USE

• Always turn off the appliance and disconnect from the power supply before cleaning.
• Evacuate the water by taking off the stopple and switching to the evacuation position after every use.
• Clean all surfaces of the appliance with hot soapy water after every use. Rinse and dry with a wet cloth.
• Clean the control panel with a soft moist cloth, if necessary use ineffective detergent.
• Do not use abrasive cleaning chemicals as these can leave harmful residues.
• Do not clean the appliance by spraying water directly, otherwise electric motor may get damaged.

PERIODIC CLEANING AND MAINTENANCE

• Maintenance should be done by a qualified person.
• For the efficiency of the product, it is significant to keep the service-supported annual maintenance of the boiler.
• According to the scale ratio of your location, it is advised to keep the weekly/monthly maintenance to clean the washing tank and interior surfaces, water hoses, trunks, and sprinklers.
• Please clean the washing nozzles weekly by disassembling them.
• Please clean the drainage pump and the engine sorption filter weekly.
• Utilization of anti-scale during the cleaning of the apparatus.
• After the entrance of the clean water into the machine, please wait for the heating time.
• Pour 100 milliliters of anti-scale into the boiler.
• Run the empty machine for 3-4 times.
• Drain the water.
• Do not leave the anti-scale substance within the boiler for a long period.
• Otherwise, it might damage the internal parts.

TROUBLESHOOTING

THE APPLIANCE DOESN’T WASH WELL| 1.     Clean the absorbing filter if it is dirty.

2.     Check the washing nozzles if they are accumulated with residues or not.

3.     Check the amount of detergent.

4.     If the chosen washing program is too low, repeat the program.

5.     Check if the plates are placed in the baskets correctly.

---|---
CUPS AND PLATES ARE NOT DRIED WELL| 1.     If there is a polisher or not, if not add some.

2.     Check the amount of polisher.

---|---
MIST OVER ON CUPS| 1.     After the washing process, take off the cups from the baskets.
---|---
CORROSİON ON CUPS| 1.     Only use products that are not foaming for professional dishwashers.
---|---
MUCH FOAM AT THE STORAGE| 1.     Check the amount of detergent.

2.     If foaming detergent is used, pour it and rinse the storage till the foams are lost.

3.     Do not wash with cold water, wait for the warmed lamp

---|---
WASHING OR RINSING HANDLES ARE TURNING SLOWLY| 1.     Take off the washing handles and clean them.

2.     Clean the washing pump absorbing filter.

3.     Check the rinse water pressure

---|---
VISCIDITY AND SPOTS ON CUPS| 1.     Reduce the amount of polisher.
---|---

• If dishwashing is not done at a suitable quality
• If any function of security doesn’t work
• Do not use the appliance.
• If these problems are still going on, contact our authorized services.

SPARE PART LIST-EXPLODING DRAWING

PRODUCT CODE:500-SD

NO| PRODUCT NAME| P. CODE
1| INTERVENTION COVER| M.MEK-TES-KLP-006
2| BOTTOM COVER SHEET| YSC-ERS.BYM-LZ-0452
3| COVER HANDLE| M.AKS-KLP-INX-003
4| TOP COVER HANDLE| YSC-ERS.BYM-LZ-0455
5| SLEEVE PART| YTL-ERS.BYM-KS-0119
6| COVER OUTER SHEET| YSC-ERS.BYM-PN-0344
7| CORNER PLASTIC RIGHT| M.ENJ-ERS-PLS-BYM-061
8| CORNER PLASTIC LEFT| M.ENJ-ERS-PLS-BYM-062
9| FOOT| M.AKS-AYK-INX-004
10| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-009
11| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-013
12| DIGITAL CARD| M.ELK-EDM-DGT-048
13| LC1K1210M7 CONTACTOR| M.ELK-KNT-KNT-022
14| MAGNETIC SENSOR WITHOUT LED| M.ELK-SWC-KTG-004
15| DIGITAL ELECTRICAL PANEL GROUP| M.ELK-PNO-BYM-010
16| 32.5 MM CABLE| HEL-KB-TT-32,5-SYH
17| WASTE WATER HOSE| M.MEK-TES-HRT-033
18| LEFT SIDE SHEET| YSC-ERS.BYM-PN-0346
19| HOSE LOWER ELBOW| M.ENJ-ERS-PLS-BYM-096
20| SPRAY GASKET| M.ENJ-ERS-LST-019
21| PRESSURE PLASTIC| M.ENJ-ERS-PLS-BYM-059
22| SPINNING SPINDLE| YTL-ERS.BYM-KS-0001
23| FILTER NUT| M.ENJ-ERS-PLS-BYM-113
24| LOWER FOUNTAIN CENTER| M.ENJ-ERS-PLS-BYM-020
25| FOUNTAIN| M.ENJ-ERS-PLS-BYM-053
26| SPRAY SCREW| M.ENJ-ERS-PLS-BYM-070
27| PROTESTANT FLOAT| M.ELK-MUH-001
28| HOSE UPPER ELBOW| M.ENJ-ERS-PLS-BYM-097
29| PUMP HOSE| ERS.M.MEK-TES-HRT-002
30| FILTER| M.ENJ-ERS-PLS-BYM-041
31| VALVE HOSE| ERS.M.MEK-TES-HRT-006
---|---|---
32| VALVE (14 LT)| M.ELK-SLN-PLS-001
33| HOSE 150CM| ERS.M.MEK-TES-HRT-011
34| PROTESTANT HOSE| HTS-HRT-008
35| AIR TRAP| M.ENJ-ERS-PLS-BYM-019
36| WASHING MOTOR| M.ELK-MTR-PMP-001
37| WATER INLET HOSE| M.MEK-TES-HRT-001
38| BACK COVER SHEET| YSC-ERS.BYM-PN-0010
39| TOP COVER SHEET| YSC-ERS.BYM-LZ-0289
40| GLASS BASKET| BB.01
41| SPOON FORK BASKET| KC.01
42| PLATE BASKET| TB.01
43| CHASSIS| –
44| RIGHT SIDE SHEET| YSC-ERS.BYM-PN-0347
45| MAGNET LOCATION| M.ENJ-ERS-PLS-BYM-001
46| MAGNET| M.MIK-ERS-001
47| DRAIN WEDGE| M.ENJ-ERS-PLS-BYM-016
48| COVER LOCK| ARA-ERS.BYM-0013
49| LOCK BODY| YTL-ERS.BYM-KS-0072
50| COVER LOCK SPRING| M.YAY-ERS-035
51| BALL| M.MUH-021
52| LOCK KIT SPRING PLACE| YTL-ERS.BYM-KS-0073
53| FILTER COVER| M.ENJ-ERS-PLS-BYM-086
54| DISCHARGE WEDGE LOCATION| M.ENJ-ERS-PLS-BYM-112
55| TANK RESISTANCE 230V-2500W| M.ELK-RZS-BRU-BYM-028
56| RESISTANCE COVER| M.ENJ-ERS-PLS-BYM-025
57| BOILER RESISTANCE 220V-5000W| M.ELK-RZS-BRU-BYM-030
58| BOILER TANK| M.MEK-TES-BYM-BYL-001
59| WASHING PUMP HOSE| ERS.M.MEK-TES-HRT-014
60| DRAIN PUMP| M.ELK-MTR-PMP-002

PRODUCT CODE:500-380-SD

NO| PRODUCT NAME| P. CODE
1| INTERVENTION COVER| M.MEK-TES-KLP-006
2| BOTTOM COVER SHEET| YSC-ERS.BYM-LZ-0452
3| COVER HANDLE| ERS.M.AKS-KLP-INX-003
4| TOP COVER HANDLE| YSC-ERS.BYM-LZ-0455
5| SLEEVE PART| YTL-ERS.BYM-KS-0119
6| COVER OUTER SHEET| YSC-ERS.BYM-PN-0344
7| CORNER PLASTIC RIGHT| M.ENJ-ERS-PLS-BYM-061
8| CORNER PLASTIC LEFT| M.ENJ-ERS-PLS-BYM-062
9| FOOT| M.AKS-AYK-INX-004
10| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-009
11| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-013
12| DIGITAL CARD| M.ELK-PNO-BYM-013
13| LC1K1210M7 CONTACTOR| ERS.M.ELK-KNT-KNT-022
14| MAGNETIC SENSOR WITHOUT LED| M.ELK-SWC-KTG-004
15| DIGITAL PANEL GROUP 380V| M.ELK-PNO-BYM-018
16| 32.5 MM CABLE| HEL-KB-TT-32,5-SYH
17| WASTE WATER HOSE| M.MEK-TES-HRT-033
18| LEFT SIDE SHEET| YSC-ERS.BYM-PN-0346
19| HOSE LOWER ELBOW| M.ENJ-ERS-PLS-BYM-096
20| SPRAY GASKET| M.ENJ-ERS-LST-019
21| PRESSURE PLASTIC| M.ENJ-ERS-PLS-BYM-059
22| SPINNING SPINDLE| YTL-ERS.BYM-KS-0001
23| FILTER NUT| M.ENJ-ERS-PLS-BYM-113
24| LOWER FOUNTAIN CENTER| M.ENJ-ERS-PLS-BYM-020
25| FOUNTAIN| M.ENJ-ERS-PLS-BYM-053
26| SPRAY SCREW| M.ENJ-ERS-PLS-BYM-070
27| PROTESTANT FLOAT| M.ELK-MUH-001
28| HOSE UPPER ELBOW| M.ENJ-ERS-PLS-BYM-097
29| PUMP HOSE| ERS.M.MEK-TES-HRT-002
30| FILTER| M.ENJ-ERS-PLS-BYM-041
31| VALVE HOSE| ERS.M.MEK-TES-HRT-006
32| VALVE (14 LT)| M.ELK-SLN-PLS-001
---|---|---
33| HOSE 150CM| ERS.M.MEK-TES-HRT-011
34| PROTESTANT HOSE| HTS-HRT-008
35| AIR TRAP| M.ENJ-ERS-PLS-BYM-019
36| WASHING MOTOR| M.ELK-MTR-PMP-001
37| WATER INLET HOSE| M.MEK-TES-HRT-001
38| BACK COVER SHEET| YSC-ERS.BYM-PN-0010
39| TOP COVER SHEET| YSC-ERS.BYM-LZ-0289
40| GLASS BASKET| BB.01
41| SPOON FORK BASKET| KC.01
42| PLATE BASKET| TB.01
43| CHASSIS| –
44| RIGHT SIDE SHEET| YSC-ERS.BYM-PN-0347
45| MAGNET LOCATION| M.ENJ-ERS-PLS-BYM-001
46| MAGNET| M.MIK-ERS-001
47| DRAIN WEDGE| M.ENJ-ERS-PLS-BYM-016
48| COVER LOCK| ARA-ERS.BYM-0013
49| LOCK BODY| YTL-ERS.BYM-KS-0072
50| COVER LOCK SPRING| M.YAY-ERS-035
51| BALL| M.MUH-021
52| LOCK KIT SPRING PLACE| YTL-ERS.BYM-KS-0073
53| FILTER COVER| M.ENJ-ERS-PLS-BYM-086
54| DISCHARGE WEDGE LOCATION| M.ENJ-ERS-PLS-BYM-112
55| TANK RESISTANCE 230V-2500W| M.ELK-RZS-BRU-BYM-028
56| RESISTANCE COVER| M.ENJ-ERS-PLS-BYM-025
57| BOILER RESISTANCE 220V-5000W| M.ELK-RZS-BRU-BYM-030
58| BOILER TANK| M.MEK-TES-BYM-BYL-001
59| WASHING PUMP HOSE| ERS.M.MEK-TES-HRT-014
60| DRAIN PUMP| M.ELK-MTR-PMP-002

PRODUCT CODE: GE500ND

NO| PRODUCT NAME| P. CODE
1| INTERVENTION COVER| M.MEK-TES-KLP-006
2| BOTTOM COVER SHEET| YSC-ERS.BYM-LZ-0452
3| COVER HANDLE| ERS.M.AKS-KLP-INX-003
4| TOP COVER HANDLE| YSC-ERS.BYM-LZ-0455
5| SLEEVE PART| YTL-ERS.BYM-KS-0119
6| COVER OUTER SHEET| YSC-ERS.BYM-PN-0344
7| CORNER PLASTIC RIGHT| M.ENJ-ERS-PLS-BYM-061
8| CORNER PLASTIC LEFT| M.ENJ-ERS-PLS-BYM-062
9| FOOT| M.AKS-AYK-INX-004
10| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-009
11| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-013
12| DIGITAL CARD| M.ELK-PNO-BYM-013
13| LC1K1210M7 CONTACTOR| ERS.M.ELK-KNT-KNT-022
14| MAGNETIC SENSOR WITHOUT LED| M.ELK-SWC-KTG-004
15| DIGITAL ELECTRICAL PANEL GROUP| M.ELK-PNO-BYM-010
16| 32.5 MM CABLE| HEL-KB-TT-32,5-SYH
17| WASTE WATER HOSE| M.MEK-TES-HRT-033
18| LEFT SIDE SHEET| YSC-ERS.BYM-PN-0346
19| HOSE LOWER ELBOW| M.ENJ-ERS-PLS-BYM-096
20| SPRAY GASKET| M.ENJ-ERS-LST-019
21| PRESSURE PLASTIC| M.ENJ-ERS-PLS-BYM-059
22| SPINNING SPINDLE| YTL-ERS.BYM-KS-0001
23| FILTER NUT| M.ENJ-ERS-PLS-BYM-113
24| LOWER FOUNTAIN CENTER| M.ENJ-ERS-PLS-BYM-020
25| FOUNTAIN| M.ENJ-ERS-PLS-BYM-053
26| SPRAY SCREW| M.ENJ-ERS-PLS-BYM-070
27| PROTESTANT FLOAT| M.ELK-MUH-001
28| HOSE UPPER ELBOW| M.ENJ-ERS-PLS-BYM-097
29| PUMP HOSE| ERS.M.MEK-TES-HRT-002
30| FILTER| M.ENJ-ERS-PLS-BYM-041
31| VALVE HOSE| ERS.M.MEK-TES-HRT-006
---|---|---
32| VALVE (14 LT)| M.ELK-SLN-PLS-001
33| HOSE 150CM| ERS.M.MEK-TES-HRT-011
34| PROTESTANT HOSE| HTS-HRT-008
35| AIR TRAP| M.ENJ-ERS-PLS-BYM-019
36| WASHING MOTOR| M.ELK-MTR-PMP-001
37| WATER INLET HOSE| M.MEK-TES-HRT-001
38| BACK COVER SHEET| YSC-ERS.BYM-PN-0010
39| TOP COVER SHEET| YSC-ERS.BYM-LZ-0289
40| GLASS BASKET| BB.01
41| SPOON FORK BASKET| KC.01
42| PLATE BASKET| TB.01
43| CHASSIS| –
44| RIGHT SIDE SHEET| YSC-ERS.BYM-PN-0347
45| MAGNET LOCATION| M.ENJ-ERS-PLS-BYM-001
46| MAGNET| M.MIK-ERS-001
47| DRAIN WEDGE| M.ENJ-ERS-PLS-BYM-016
48| COVER LOCK| ARA-ERS.BYM-0013
49| LOCK BODY| YTL-ERS.BYM-KS-0072
50| COVER LOCK SPRING| M.YAY-ERS-035
51| BALL| M.MUH-021
52| LOCK KIT SPRING PLACE| YTL-ERS.BYM-KS-0073
53| FILTER COVER| M.ENJ-ERS-PLS-BYM-086
54| DISCHARGE WEDGE LOCATION| M.ENJ-ERS-PLS-BYM-112
55| TANK RESISTANCE 230V-2500W| M.ELK-RZS-BRU-BYM-028
56| RESISTANCE COVER| M.ENJ-ERS-PLS-BYM-025
57| BOILER RESISTANCE 220V-5000W| M.ELK-RZS-BRU-BYM-030
58| BOILER TANK| M.MEK-TES-BYM-BYL-001
59| WASHING PUMP HOSE| ERS.M.MEK-TES-HRT-014
60| DRAIN PUMP| M.ELK-MTR-PMP-002
61| DETERGENT PUMP| M.ELK-MTR-PMP-006
62| POLISHING PUMP| M.ELK-MTR-PMP-007

PRODUCT CODE:500-380-SDF

NO| PRODUCT NAME| P. CODE
1| INTERVENTION COVER| M.MEK-TES-KLP-006
2| BOTTOM COVER SHEET| YSC-ERS.BYM-LZ-0452
3| COVER HANDLE| ERS.M.AKS-KLP-INX-003
4| TOP COVER HANDLE| YSC-ERS.BYM-LZ-0455
5| SLEEVE PART| YTL-ERS.BYM-KS-0119
6| COVER OUTER SHEET| YSC-ERS.BYM-PN-0344
7| CORNER PLASTIC RIGHT| M.ENJ-ERS-PLS-BYM-061
8| CORNER PLASTIC LEFT| M.ENJ-ERS-PLS-BYM-062
9| FOOT| M.AKS-AYK-INX-004
10| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-009
11| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-013
12| DIGITAL CARD| M.ELK-PNO-BYM-013
13| LC1K1210M7 CONTACTOR| ERS.M.ELK-KNT-KNT-022
14| MAGNETIC SENSOR WITHOUT LED| M.ELK-SWC-KTG-004
15| DIGITAL PANEL GROUP 380V| M.ELK-PNO-BYM-018
16| 32.5 MM CABLE| HEL-KB-TT-32,5-SYH
17| WASTE WATER HOSE| M.MEK-TES-HRT-033
18| LEFT SIDE SHEET| YSC-ERS.BYM-PN-0346
19| HOSE LOWER ELBOW| M.ENJ-ERS-PLS-BYM-096
20| SPRAY GASKET| M.ENJ-ERS-LST-019
21| PRESSURE PLASTIC| M.ENJ-ERS-PLS-BYM-059
22| SPINNING SPINDLE| YTL-ERS.BYM-KS-0001
23| FILTER NUT| M.ENJ-ERS-PLS-BYM-113
24| LOWER FOUNTAIN CENTER| M.ENJ-ERS-PLS-BYM-020
25| FOUNTAIN| M.ENJ-ERS-PLS-BYM-053
26| SPRAY SCREW| M.ENJ-ERS-PLS-BYM-070
27| PROTESTANT FLOAT| M.ELK-MUH-001
28| HOSE UPPER ELBOW| M.ENJ-ERS-PLS-BYM-097
29| PUMP HOSE| ERS.M.MEK-TES-HRT-002
30| FILTER| M.ENJ-ERS-PLS-BYM-041
31| VALVE HOSE| ERS.M.MEK-TES-HRT-006
32| VALVE (14 LT)| M.ELK-SLN-PLS-001
---|---|---
33| HOSE 150CM| ERS.M.MEK-TES-HRT-011
34| PROTESTANT HOSE| HTS-HRT-008
35| AIR TRAP| M.ENJ-ERS-PLS-BYM-019
36| WASHING MOTOR| M.ELK-MTR-PMP-001
37| WATER INLET HOSE| M.MEK-TES-HRT-001
38| BACK COVER SHEET| YSC-ERS.BYM-PN-0010
39| TOP COVER SHEET| YSC-ERS.BYM-LZ-0289
40| GLASS BASKET| BB.01
41| SPOON FORK BASKET| KC.01
42| PLATE BASKET| TB.01
43| CHASSIS| –
44| RIGHT SIDE SHEET| YSC-ERS.BYM-PN-0347
45| MAGNET LOCATION| M.ENJ-ERS-PLS-BYM-001
46| MAGNET| M.MIK-ERS-001
47| DRAIN WEDGE| M.ENJ-ERS-PLS-BYM-016
48| COVER LOCK| ARA-ERS.BYM-0013
49| LOCK BODY| YTL-ERS.BYM-KS-0072
50| COVER LOCK SPRING| M.YAY-ERS-035
51| BALL| M.MUH-021
52| LOCK KIT SPRING PLACE| YTL-ERS.BYM-KS-0073
53| FILTER COVER| M.ENJ-ERS-PLS-BYM-086
54| DISCHARGE WEDGE LOCATION| M.ENJ-ERS-PLS-BYM-112
55| TANK RESISTANCE 230V-2500W| M.ELK-RZS-BRU-BYM-028
56| RESISTANCE COVER| M.ENJ-ERS-PLS-BYM-025
57| BOILER RESISTANCE 220V-5000W| M.ELK-RZS-BRU-BYM-030
58| BOILER TANK| M.MEK-TES-BYM-BYL-001
59| WASHING PUMP HOSE| ERS.M.MEK-TES-HRT-014
60| DRAIN PUMP| M.ELK-MTR-PMP-002
61| DETERGENT PUMP| M.ELK-MTR-PMP-006
62| POLISHING PUMP| M.ELK-MTR-PMP-007

ELECTRIC CIRCUIT SCHEMA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>