saunalife E6 2 Person Barrel Sauna Sun Valley Saunas Instruction Manual
- June 13, 2024
- saunalife
Table of Contents
saunalife E6 2 Person Barrel Sauna Sun Valley Saunas
Product Information
Product Name: Ergo-Series E6 Barrel Sauna
Dimensions: 59D x 81H
Revision: 4/2023
Product Usage Instructions
- Before starting the construction, carefully read the manual.
- Wooden Front Wall Installation:
- Fix the front wall diagonally to make it more rigid during installation.
- Pre-drill holes before inserting screws.
- Use brackets inside the wall for support.
- Wooden Back Wall Installation:
- Fix the back wall temporarily to support the walls.
- Use water level for accurate installation.
- Pre-drill holes before inserting screws.
- Center Stave and Cradle Installation:
- Position the cradles inside the grooves of the center stave.
- Secure the cradles using screws.
- Outer Bands (B) Installation:
- Leave a 1/4″ gap when tightening screws to allow for adjustment when installing the outer bands.
- Use a strap to support boards during installation.
- Remove temporary bracing after installation.
- Board Connection:
- Join two boards together to bridge the width of the gap.
- Raise slightly before installing the combined board.
- Trim the flat edge of the board if needed.
- Fasten the two halves using screws.
- Barrel Bands Installation:
- Place the bands around the barrel on the outer side of the cradle.
- Remove the strap after installation.
- Benches Installation:
- Refer to the front-glass wall installation manual for proper benches installation if your sauna is equipped with a front-glass wall.
- Pre-drill holes before inserting screws.
- Use a level for accurate installation.
Note : Please read manual before construction
Front & Back Walls
Details list
E6 Barrel Sauna 59D” x 81H”
Tools needed
Installation
Wooden front wall installation ****
Wooden back wall installation E6 Barrel Sauna 59D” x 81H”
E6 Barrel Sauna 59D” x 81H”
E6 Barrel Sauna 59D” x 81H”
Read User Manual Online (PDF format)
Loading......