BEGA 23 250.4 Wall Luminaire Instruction Manual

BEGA 23 250.4 Wall Luminaire

Product Information

Specifications

• Lamp Module connected wattage: 7.6 W
• Luminaire connected wattage: 8.8 W
• Rated temperature: ta = 25
• Ambient temperature: ta max = 40
• Module designation: 23 250.4 K3
• Colour temperature: 3000 K
• Colour rendering index (CRI): > 90
• Module luminous flux: 1260 lm
• Luminaire luminous flux: 912 lm
• Luminaire luminous efficiency: 103.6 lm / W

Product Usage Instructions

Safety Instructions

The installation and operation of this luminaire must adhere to national safety regulations. Only a qualified electrician should perform installation and commissioning to prevent damage from improper use or installation. Any modifications should be made by authorized personnel to avoid liability issues.

Overvoltage Protection

The luminaire’s electronic components are protected against overvoltage as per DIN EN 61547. For additional protection against transients, consider using separate overvoltage protection components available on the manufacturer’s website.

Installation Instructions

When mounting or dismantling, maintain a minimum distance of 250 mm between the removable cap and the wall. Avoid direct contact with the LED’s light output opening during installation or relamping to prevent damage.

Dimension

Instructions for use

Application

Wall luminaire · indoor luminaire made of hand-blown opal glass and metal housing, for all lighting tasks in interior applications.
They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

Product Description

• Luminaire made of Aluminium, finish Colour velvet brass Hand-blown opal glass
• Two elongated mounting holes
• Width 6 mm · 275 mm spacing Insulating housing with cable entry for mains supply cable up to ø 10,5 mm, max. 3 x 1,5@
• Connection terminal 2.5@
• Earth conductor connection

BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V

BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I

• Protection class IP 44
• Protected against granular foreign bodies ≥ 1 mm and splash water
• Impact strength IK02
• Protection against mechanical impacts < 0.2 joule
• Safety mark
• Conformity mark
• Weight: 1.7 kg

This product contains light sources of energy efficiency class(es) D.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

• Module connected wattage 7.6 W
• Luminaire connected wattage 8.8 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 40 °C

23 250.4 K3

• Module designation 2x LED-0424/930

• Colour temperature 3000 K

• Colour rendering index CRI > 90
  Module luminous flux 1260 lm

• Luminaire luminous flux 912 lm

• Luminaire luminous efficiency 103,6 lm / W

23 250.4 K4

• Module designation 2x LED-0424/940
• Colour temperature 4000 K
• Colour rendering index CRI > 90
• Module luminous flux 1330 lm
• Luminaire luminous flux 962 lm
• Luminaire luminous efficiency 109,3 lm / W\

Installation

For mounting and dismantling please keep a minimum distance of 250 mm between the removable cap and the wall. LEDs are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

Open luminaire

• Loosen knob, remove cap and glass.
• Drill mounting holes into the mounting surface – spacing 275 mm.
• For the mains supply connecting open the insulation housing – pull open – strip mains supply cable max. 15 mm and lead it into the insulation housing – see sketch.
• Make earth conductor connection and electrical connection.
• Connect both parts of the insulation housing until they audibly engage.
• The outer coating of the cable has to be fully enclosed by the compression nipple.
• Fix luminaire with enclosed or any other suitable fixing material onto the mounting surface. Place glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Replacement of the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module. The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools. Disconnect the system. Loosen lateral knob, remove cap and take out glass. Please follow the installation instructions for the LED module.
Defective glass must be replaced. Insert glass into luminaire housing, close luminaire with the cap and screw in knob into the cap.

Spares

• Spare glass 11 002 946 .1R G
• LED power supply unit DEV-0304/350
• LED module 3000 K LED-0424/930
• LED module 4000 K LED-0424/940
• Gasket 83 001 179

BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com

FAQ

Q: Can I replace specific parts of the luminaire?

A: Yes, you can replace spare parts such as the spare glass, LED power supply unit, LED modules in both 3000 K and 4000 K, and gaskets. Refer to the provided part numbers for ordering replacements.

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>