EATON IL040011ZU DX Braking Resistor Instructions
- June 10, 2024
- EATON
Table of Contents
EATON IL040011ZU DX Braking Resistor
Product Information
The DX-BR is an electrical device used for regulating and controlling electric heating systems. It comes in various models with different power ratings ranging from 1400W to 102400W (model dependent). The device has several electrical connectors, including T1, T2, BR, DC+, and PES, and it is capable of handling a maximum voltage of 1200V DC (IEC/EN) or 1000V DC (UL).
The DX-BR is designed for use by experienced electricians or individuals with
appropriate training in electrical systems.
Careful installation and adherence to safety protocols are crucial to prevent
electrical hazards and ensure optimal performance. Do not attempt to install
or operate the device without proper training and knowledge of electrical
systems.
Product Usage Instructions
Before installing the DX-BR device, ensure that you have the necessary tools and equipment, including screws, nuts, and a screwdriver. Follow these steps:
-
Determine the appropriate location for installation. Ensure that the surface is flat and stable.
-
Mount the DX-BR device onto the surface using the screws supplied with the device. Ensure that the device is securely fastened in place.
-
Connect the electrical wires to their respective connectors.
Follow the wiring diagram provided in the user manual carefully. -
Ensure that all connections are properly tightened and secured.
-
Power on the device and verify its operation using a suitable testing method. Refer to the user manual for detailed instructions on testing and calibration.
When using the DX-BR device, always follow these safety guidelines:
- Do not touch the device or its electrical connections while it is in operation or connected to a power source.
- Do not attempt to repair or modify the device unless you are a qualified electrician with the necessary training and knowledge of electrical systems.
- Do not expose the device to water or other liquids. Keep it away from moisture and damp environments.
- Always power off the device before performing any maintenance or repairs.
For more information on the DX-BR device, including model-specific details and troubleshooting tips, refer to the user manual provided with the product or visit the manufacturer’s website at Eaton.com.
Instruction Leaflet
Electric current! Danger to life!
Only skilled or instructed persons may carry out the following operations.
DX-BR…
- DX-BR002-54K3
- DX-BR002-102K4
- DX-BR006-5K1
- DX-BR006-9K2
- DX-BR006-18K1
- DX-BR006-33K3
- DX-BR012-3K1
- DX-BR012-5K1
- DX-BR012-9K2
- DX-BR012-18K1
- DX-BR022-1K4
- DX-BR022-3K1
- DX-BR022-5K1
- DX-BR022-9K2
- DX-BR040-3K1
- DX-BR040-5K1
- DX-BR047-3K1
- DX-BR047-5K1
- DX-BR047-9K2
- DX-BR050-3K1
- DX-BR050-5K1
- DX-BR075-5K1
- DX-BR100-6K2
MN04020005Z… DA1
MN040059…..DC1
MN040002……DG1
MN040060…..DM1
Dimensions and weights
DX-BR……
DX-BR002-54K3, DX-BR006-18-K1, DX-BR012-18K1
DX-BR002-102K4
Electrical connection
Mounting position
DX-BR002-54K3,
DX-BR006-18K1,
DX-BR012-18K1
DX-BR002-102K4,
DX-BR006-33K3
WARNING
When mounting, make sure that air can flow freely around the resistor.
The mounting surface must be heat-resistant. If mounting vertically,the
electrical terminals must always be on the bottom.
EU: Eaton lIndustries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
UK: Eaton Electric Ltd, P.0. Box 554, Abbey Park, Southampton Road,
Titchfield, P014 40A, United Kingdom
© 2013 Eaton Industries GmbH
USA:
Eaton.com/eatoncare
+1 877-386-2273
Eaton.com/contacts
Eaton.com/aftersales
Eaton.com/documentation
11/21 IL040011ZU
Eaton.com/recycling
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>