DTF STATION TY4050 Proxima Dual Heat Press User Manual
- June 4, 2024
- DTF STATION
Table of Contents
TY4050 Proxima Dual Heat Press
User Manual
TY4050 Proxima Dual Heat Press
- Press Handle
- Control Panel
- Fuse
- Power Switch
- Heat Plate
- Pressure Adjustment Knob
Control Panel
| Press the SET button one time to start adjusting the temperature. Press it
again to adjust the time, and press it for the third time to exit the setting
interface.
Note: Press and hold the SET button will enter the parameter setting
interface. Do not change any parameters. Press and hold the SET button or
power off the machine to exit the parameter setting interface.
---|---
| Press this key to decrease the corresponding parameter value after the
machine enters the setting interface.
| Press this key to increase the corresponding parameter value after the
machine enters the setting interface.
Press and hold this key to start self-tuning mode (°C or °F symbol will blink
on the panel).
Once the machine enters self-tuning mode, do not unplug it or press any keys
until self-tuning has finished. Implement self-tuning after changing the heat
plate or thermocouple wire.
Specifications
Plate Size (in)| Voltage| Power| Dimensions (in)|
Shipping Dimensions (in)| Weight (lbs.)
---|---|---|---|---|---
15.75 x19.69| 110V| 2kw| 39.4(L)x26.8(W) x21.7(H)| 48.8(L)x31.50(W) x24.41(H)|
260.15
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>